In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In this master thesis outage statistics covering tree years from two distribution grids are analyzed with the purpose to deduce which factors yield outages. The statistics are extensive therefore allowing in-depth analysis of both customer and system related factors. From this starting point and as a model of explanation energy not supplied is studied as the consequence and the measurement of the inconvenience caused by outages. Different methods for calculating energy not supplied are developed and studied and put in comparison to the method used in Network Performance Assessment Model, which is the Swedish frame work for regulating electricity distribution.Analysis of the outage statistics show a relation between the type category of customer and outages that can be deduced to the variance and the density associated with that customer category. Prioritization of different customer categories is elevated also in this aspect.

Secondary schools have for decades debated whether they promote social reproduction which is considered to generate the homogeneous student compositions. The gap between the academic programs and vocational education programs is considered to increase. What in recent years has appeared in research is that the gap is increasing most tend to be in the specific academic program, particularly in science. This paper's intention is to describe the science program at a local level and the pupils who were admitted to the science program autumn 2009 on the basis of an educational sociological perspective. The survey consisted of a census in which all students were given the opportunity to answer a questionnaire.

This thesis deals with numerical simulation of earth pressure against tubular bridges in the software Plaxis. Plaxis is a FEM (Finite Element Method) software based on numerical calculations for which approximate solutions are developed through an iterative process. The program is specifically designed for soil and rock mechanical tests, such as voltage and deformation calculations in soil.The Royal Institute of Technology conducted in 2005, field tests on tubular bridges of corrugated steel, which was part of Ersa Bayoglu Fleners PhD (Bayoglu Flener, 2009). She studied how two different tubular bridges deformed during installation and filling. Tests and measurements were made during filling.

Det pågår en skolpolitisk debatt om andelen kärnämnen respektive karaktärsämnen inom gymnasieskolans teoretiska och praktiska program. Syftet med studien var att undersöka om det finns en skillnad i studiemotivation bland gymnasielever i kärnämnen respektive karaktärsämnen beroende på om de går ett teoretiskt program eller ett praktiskt program. Deltagarna i undersökning var elever på ett gymnasium från den sista årskursen dels från ett teoretiskt program, Naturvetarprogrammet (NV) och från ett praktiskt program, Omvårdnadsprogrammet (OP). Metoden som undersökningen använde sig av var en enkät som tog upp området motivation till kärnämnen och karaktärsämnen. Resultatet visade att motivationen hos elever på det teoretiska programmet var högre för kärnämnet än vad det var för elever på det praktiska programmet, de hade en högre motivation i sitt karaktärsämne.

Due to an increasing amount of people being put on a sick-list the issue of work health has come to receive a lot more attention. To confront the problem, different varieties of keep-fit measures have been launched in the workplace. A prime example of such a measure can be found at Centralsjukhuset Kristianstad, which this survey is investigating. The primary goal of this study is to investigate the use of the Keep-fit measures program and to identify what motivates the employees to utilize this program. Further we would like to investigate if the program, through motivation and learning, generates improvement and retention of the individuals? health.

This work is a quick look at the overall quality of the teaching program at Växjö University and how the program is viewed by the students, future teachers, who attend it. This work aims to deduce how Växjö University uses it's resources to improve the overall quality of the teaching program..

Studien försöker belysa vilka svårigheter elever som läser det individuella programmet möter och vilka möjligheter de har i deras strävan att gå vidare till ett nationellt program. Studien ger också svar på frågan om IV-elever trivs med att läsa programmet och om de börjar en gymnasieutbildning efter IV. Jag ville också ta reda på om vad elever i grundksolans årskurs nio tyckte om informationen om gymnasieskolan, och om alla fick chansen att prata med en studie- och yrkesvägledare. Studien belyser också frågan om ursprung har en viss betydelse för fortsatta studier på nationella program..

This thesis has been done in order to ease the process of drawing schematics ofelectrical wiring. The need arose after demand from the government due to a seriesof incidents that took place during the revision of the nuclear power plant in year2009.The task of the project has been to create a computer program that can generate agraphical representation of the electrical components relations. The basis for theprogram has been an example of how the client wants the graphical representation tolook. During the course of the project weekly meetings have occured in which theclient has reviewed the work.The result of the project is a program written in Visual Basic Applications that can berun in Microsoft Excel. The program is capable of generating graphics for a majority ofthe cases.

Commissioned for this report is Ramboll, Bridge and Tunnel Unit in Stockholm. Theidea throughout the work has been to primarily help bridge designers compilingadvice and instructions on how fatigue verification for railway bridges in reinforcedconcrete shall be performed under the new rules, the Eurocodes.After the introduction of the Eurocodes in 2011 has major problems emerged amongdesigners around Sweden. In some areas, it differs in the calculation rules comparedwith rules from the Swedish Transport Administration and the National Board ofHousing, Building and Planning calculation. Fatigue verification is one area where thenew calculation rules are different from the past.A large part of the report has been to interpret and find the relevant information inthe Eurocodes concerning fatigue. When questions or doubts have surfaced, this hasbeen discussed with Elisabeth Helsing at the Swedish Transport Administration andbridge designers at Ramboll.The result is a report where the structure is organized in the way that the bridgedesigners can move from cover to cover and realize that fatigue verification in realityfollows the same order as the report's sections.

The purpose with this report is to examine how the implemented energy efficiency measures on Bokelundskolan in Växjö have had impact on the energy use. The measures which have been implemented are, new ventilation system, new heating system, optimized adjustment of the heating system, new windows with U-value 1.2 and lower window height, insulation under windows and in the crawl space. The school's energy use before and after rebuilding has been calculated with the calculation program, Vip-Energy 1.5.5.Calculations of energy use for the school with windows on U-value, 0.9 and 0.7 have also been done. The replacement of windows has been studied from a cost perspective. The conclusion is that the exchange of heat and ventilation system was the biggest contributor to reduced energy use on Bokelundskolan.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

Who is integrating school-holiday home? It is for the teachers, recreational pedagogue or the students? How do the students think and act to keep the different activities apart?My purpose was to study how children sort the day between school and recreational home interactions. The issues were: How do they distinguish between the different activities during the day?  See the students their stay after school program as part of the school day? Who decides whether you have to go to school, and whether you have to go to after school program? And do you really have to?I have interviewed six students at an elementary school, based from a phenomenographic perspective, I've used myself of issues that students have been able to respond from a school perspective and after-school perspective. My interview questions have been comparative in nature, where the same question have given different answers depending on whether the question focused on school or the afterschool program.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.