The purpose of this thesis was to look at the relationship between the experiences of work related stress among male bank employees and how they dealt with potential stress. The thesis focused on male bank employee?s experiences and management of work related stress with the control requirements and support model as a starting point. Work related stress is a phenomenon that has become a serious problem with economic impact for both the individual and organizations. Increased absence from work due to medical issues is one example of such consequences.

SummaryA complete graphic profile program along with marketing material has been produced for seven photographers.The material has been produced in consideration to sell their pictures outside of Scandinaviaand Brazil as first priority. The criterion for the profile is to give a message of quality and ofScandinavia. Through research and interviews facts about typical scandinavian design have beenfound. Since the pictures will be exported abroad, a selling packaging solution has been developed. Theparts that are included in the marketing material are: a brochure, display solution, a website and printingexamples.

ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

One step towards a more sustainable energy system is to create a more flexible electrical grid, where increased demand response among electricity consumers can play an important role. A distribution grid owner can encourage their customers to use electricity more evenly distributed during the day by introducing different types of grid fees such as time-differentiated power tariffs. In this master thesis, the theoretical economic impact of a flattened load profile for a distribution grid owner is investigated. Different factors that impact the distribution grid owner?s economy are identified and two are chosen to be quantified; losses in the grid and the fee to the feeding grid.

Syftet var att undersöka om personers Locus of Control påverkar deras konflikthanteringsstrategier i kärleksrelationer. Hypoteserna var: H1: Det finns skillnader mellan personer med extern och intern Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. H2: Personer med intern Locus of Control har större benägenhet att använda sig av relationskonflikthanteringsstrategin Kompromiss i sina kärleksrelationer. H3: Kvinnor påverkas mer än män av Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. Deltagarna var 172 studenter.

The connection between management control systems for controlling sustainability and a firm's motivation for engaging in sustainability is not completely understood (Arjaliès & Mundy, 2013). The aim of this thesis is to develop a more profound understanding for management control in achieving sustainable companies. To do this, we raise the question: How and to what extent do companies use management control systems to achieve sustainability compliance Simons's Levers of Control (1995) are applied to this question in order to get a consistent and thorough insight of management control systems. Hence, a case study of ABB:s work to achieve material compliance in accordance with EU-regulation was conducted. The findings of the case study reveal that ABB uses the regulations as explicit goals and implement them in sustainability procedures.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

Föreliggande studies syfte var att undersöka validitet och intern konsistens för den svenska översättningen av Impaired control scale (ICS), en självskattningsskala som mäter grad av kontroll av alkoholkonsumtion. ICS består av subskalorna; Attempt control (AC), Failed control (FC) samt Predicted control (PC). Svar på ICS sammanställdes från respondenter (n = 203) som behandlats för alkoholproblem vid mottagningar i Västra Götaland. Faktoranalysen visade en bakomliggande faktor för AC, och två faktorer för FC respektive PC. Den interna konsistensen var god.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

This thesis has been carried out in collaboration with LEDtec International AB. LEDtec focuses on innovative solutions in LED screens. Everything from large advertising signs to welcome signs in cities, to screens indicating speeds or warning of heavy traffic. The task was to was to help them develop a new version of the control board that is used in some of their products. The reason for this is that their old control board is obsolete and the components that are on it, is no longer manufactured or in need to be renewed.

To get an optimal print result with rotogravure on improved newsprint, MF-paper, knowledge aboutwhat adjustment that should be done through the whole production is needed. This degree project investigatesthe reproduction?s effect on the final print result.A test print is done at Quebecor World Nordic Interprint´s regular print unit. The evaluation of theprint shows how important the use of a unit adjusted ICC-profile is for the print quality. A comparisonbetween the two separation methods GCR and UCR shows that Interprint´s present ICC-profile, usingUCR as separation method, gives less missing dots.

AimOur aim with this study was to examine how outdoor education is designed and experienced in three upper (senior) levels of compulsory school in Stockholm, and to compare it with the Norwegian equivalence.MethodOur method has been interviews with ten teachers, of whom six are Swedish teachers and four are Norwegian teachers. Two Swedish teachers are teaching in other subjects than Physical Education, four are teachers in Physical Education, two are teachers in Norway in Physical Education at and two are teachers in Norway at university level. Questionnaires were used to examine the Swedish pupils? attitudes towards outdoor education. 90 questionnaires were delivered, and 70 answered them.