Följande rapport är resultatet av det examensarbete som utförts våren 2011 inom innovativ produktion/logistik vid Mälardalens Högskola. Examensarbete behandlar ämnet Green Production med fokus på skillnader mellan ett produktionssystem som bygger på Lean Production och ett som bygger på Green Production. Områden som berörs i rapporten är de verktyg som används i de olika produktionssystemen, hur arbetet med miljöförbättrande åtgärder kan se ut i praktiken samt vilka svårigheter som finns vid arbete med miljöförbättrande åtgärder i ett företag. Examensarbetet består av en litteraturstudie där aktuell litteratur studerats inom området samt en intervjustudie som genomförts med insatta inom miljöfrågor kopplat till produktion samt operatörer.Bakgrunden till examensarbetet grundar sig i att världen står inför en framtid där många utav de råmaterial som används idag vid produktion inte kommer att kunna nyttjas i framtiden. Detta i kombination med de miljöproblem som människan åsamkat, har bidragit till att många företag insett att miljöaspekter måste vara i åtanke genom hela produktionsprocessen.Den uppfattning som erhållits genom intervjustudierna är att det är viktigt för ett företag att visa att de arbetar med miljöförbättrande åtgärder.

This master thesis investigates the user education. Christine Bruce has presented a theory of information literacy in her research which has resulted in seven different aspects of information literacy. In this study I wanted to investigate what aspects there were and what they looked like in a practical educational situation. The methods used for this study were observation and a questionnaire. I analysed the observations by using Bruces aspects of information literacy to group the observed activities into the different aspects.

This master thesis is about Augmented Reality (AR), a phenomenon that has existed since the mid-fifties but only recently has become available for the general public. This report is a knowledge compilation about AR, focusing on AR in cell phones and the use of the technology in traffic related situations.AR is usually described as adding a digital layer of information onto the real world. There are different technologies to make virtual images; in cell phones sensor-based and camera-based technologies are the most common ones.In this report, the market of AR applications for cell phones has been investigated. Three use cases have also been investigated in order to get more knowledge about the designers' thoughts and visions.In order to analyze the technology and the applications in a broader and more scientific perspective, two theories has been used: Situation Awareness (SA) and the Service Dominant Logic (SDL). These theories seem useful when reflecting on the Swedish road administrations vision, and to investigate what the applications and the AR technology can contribute to the traffic domain.The conclusions of this thesis are that:- AR can be applied on most of the human senses, but augmenting by visualization is most common.- The market for cell phone applications is growing rapidly: AR applications are relatively new but on the rise.

This thesis on the sustainable urban development has the intent to discuss the conservator?s position in alteration of the built environment. An essential component of the thesis consists of a case study in the form of an entry in an open architectural competition for the development of Furuset, an urban residential area in Norway. The thesis? discussion is based on two approaches to change and socio-economic transformations, considered being dominant within the heritage theory and practice: the production of ideas and great narratives and conservation as an instrumental tool.

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This exam report has been developed in association with Strangbetong AB, Sweden.The natural gravel that is being used as fine aggregate for concrete production today is an ending natural recourse and the Swedish government has decided to strongly reduce the extraction from the year of 2020. The only reasonable replacement is aggregates from crushed rocks but this material has other properties than natural aggregates. The concrete manufacturers now have to learn how to use these new fine aggregates in a cost effective way in order to ensure the quality of their concrete production.In this project, crushed aggregates and combination of crushed and natural aggregates have been tested with existing formulas for fresh concrete. The two parameters yield stress and plastic viscosity have been measured which gives a good description of the workability of the fresh concrete. Different methods to make measurements on the dry fine aggregates, has also been tested, to find out if there is any correlations between these parameters and the parameters from the measurement on the fresh concrete..

This master thesis is about the collaboration between the custom dairy heifer grower and thedairy producer.The custom dairy heifer grower is a rather unusual strategy of reproductive management inSweden compared to other countries like U.S. and Denmark where the specialization withindairy production gone much further. In these countries the research also has reached muchfurther within this type of industry. However in Sweden there has been research made in thearea of collaboration, but then only within collaborations in the industries of crop production,dairy production and pork meat.The down going trend of profitability within dairy production together with poor profitabilityin the beef industry could partly remedy if more collaborations around heifer contractingwould arise. But since the industry still is of a rare kind in Sweden the knowledge about howthese types of collaborative arrangements works and their contracts are put together is poor.By that the aim of this master thesis is formulated as follows: "how is usually thecollaborative arrangement between the dairy producer and custom dairy heifer growerdesigned".

Syftet med denna studie är att få en inblick i hur lärare på mellanstadiet arbetar med teknikämnet i skolan. Detta görs genom en enkät, vars frågor är upplagda efter tre frågeställningar: Vilka tankar har lärarna om teknik? Hur ser pedagogernas teknikundervisning ut? Vilket undervisningsmaterial använder lärarna sig av i teknikämnet? Totalt är det 65 lärare som arbetar eller har arbetat med teknik på mellanstadiet som deltagit i studien. Enkäten har visat på att de flesta lärarna som deltagit tycker att teknikämnet är ett roligt, spännande och intressant ämne som dock är svår bedömt, tids- och materialkrävande. Undersökningen visar även att de flesta lärarna tycker det är bäst att arbeta med teori och praktik varvat, då båda delarna behövs för att eleverna skall förstå teknikens innebörd i samhället.

To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

Today wireless transmission of data is becoming more and more popular and the need for faster transmission rates is increasing. Since the bandwidth is limited it is important to try to use it to the fullest. CDMA is a technology that allows multiple accesses on the same frequency and time thus making it very bandwidth efficient. The CDMA technology was first introduced in the second generation?s cellular systems but has since then been improved and is reused in today?s 3G systems as Wideband CDMA.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.

This essay seeks to analyze the consequences of modern information and communication technology for collective action within the framework of social movements. With references to the protests in Seattle 1999, the essay argues that the emergence of distributed collective action is closely related to the use of technology, for example cell phones and Internet. This distributed collective action can be characterized by its decentralized and self-organizing features, forming a global pattern emerging from local interactions. Whereas contemporary theories of collective action can be ´stretched´ to fit these aspects, they lack analytical tools to describe and analyze such systems. Further, their rejection of classical crowd theory is problematic, since it contains valuable insights.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.