Den övergripande avsikten med denna uppsats är att försöka ge en nyanserad bild av organisationsreceptet Lean Production. Vidare försöker jag utröna vilka potentiella vinster och risker som kan tänkas uppträda i samband med implementeringen av Lean Healthcare på Universitetssjukhuset i Lund. Utgångspunkten för denna analys är Region Skånes verksamhetsmål gällande personal, patienter och ekonomi. Analysen visar att det inte är helt okontroversiellt eller oproblematiskt att anpassa och införa produktionssystemet. Allvarligast verkar konsekvenserna kunna bli för tillgodoseendet av personalmålen, medan det ser mindre problematiskt ut gällande de ekonomiska målen och patientmålen.

The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

Background:IT development has in recent decades been fast progressing. In Sweden many schools have begun to invest in IT and new technologies. What happens at the schools that are investing in IT equipment and modern technology?Purpose:The purpose of this study is to elucidate the conditions for and the success factors and barriers that principals and teachers will experience in IT. Principals' experiences are complemented and mirrored against the teachers.

I denna uppsats diskuteras företagens self-service technology (SST) vilket innebär att kunderna själva får utföra sina tjänster med hjälp av företagens SST. Genom att låta kunderna göra detta kan företagen exempelvis spara pengar på att omorganisera personal eller rent av minska arbetsstyrkan eftersom mindre kunder kommer att kräva hjälp av personalen.I denna uppsats har resebranschen och dess SST att studeras. Uppsatsens frågeställning lyder: ?Hur upplever resebranschens kunder bokningar överInternet? där syfte är ?att undersöka och få förståelse för varför resebranschens kunder använder sig av SST när det finns andra möjligheter?.En kvalitativ metod har genomförts där sex kunder har lagt grunden till uppsatsens resultat. De huvudteorier som använts i denna uppsats är SST, customer value och technology readiness, och Davis TAM modellen samt Sheths value teori har legat till grund för analysen i uppsatsen.Teorin bakom SST är att det inte bara gynnar företagen utan även gynnar kunderna, då SST kan höja kundnyttan.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

For the last 50 years the amount of available consumer goods has exploded in number, due to improvements in production and technology. The problem is that the overall sales of many categories are stagnant and retailers are unwilling to grant the categories more shelf space. Therefore many categories are crowded with products and hard for consumers to navigate in. The purpose of this paper is to examine the effects of an assortment reduction on several variables relating to assortment perceptions, customer satisfaction and store choice. The study was carried out as an experiment with 127 participants.

In this paper the topic of 4G is examined. The investigation is conducted with use of a qualitative methodand an inductive approach. The question to be answered is what motivate and justify that 4G is put intooperation from different perspectives. The study is based upon secondary sources, such as literature studies,as well as an empirical data collection from two interview studies. The reusults obtained, which motivateand justify the introduction of 4G technology, is that it is necessary in order to meet future communicationneeds.

This thesis is commissioned by the Swedish electricity trading company GodEl with the purpose of evaluate solar electricity in multi-family buildings in the Stockholm region. The prices of solar panels have dropped recently due to the advances in technology, but the installation rate in Sweden remains low. It is therefore interesting to study the  profitability of solar electricity today, and if it is profitable enough to install based on profitability alone and not simply due to environmental considerations. Therefore this thesis first studies the profitability of solar panels based on a simulation of electricity production and consumption for multi-family buildings this region. The study concludes that solar electricity can be profitable in the Stockholm region under certain conditions; all of which have to be favourable for profitable solar electricity.The thesis also studies the opinion of the company's costumers concerning solar electricity.

Major changes within the agricultural politics today have forced the dairy production to scaleup, in order to compete on a global market. This has resulted in a reduction in the number ofsmaller dairy farms in Sweden, from about 40000 to just over 4000 over the last 30 years. Thepurpose of this study Svenska mjölkbönder, snart ett minne blott? ? Markbygdensmjölkbönder i tankar om mjölkproduktionens nuvarande situation och framtidsutsikter, is topresent the opinions of dairy farmers in Sweden, regarding the Swedish dairy industry and therelation to their own dairy production. A secondary purpose is to problematize how theconsequences of pastures and cultural landscapes influences human society as dairy farms andgrazing animals are becoming fewer.

Cross-suckling, i.e. when an offspring nurses a female other than their own mother, occurs in pig production systems where sows are group housed during lactation. As production systems where several sows and their litters are housed together during lactation are getting more common, the need of knowledge regarding cross-suckling increases. The overall aims with this thesis was to investigate how sow behaviour and productivity are associated with the occurrence of cross-suckling, and to investigate consistency in sow nursing behaviour related to cross-suckling. The study included information about the first 4 parities of 40 LxY sows kept in outdoor and indoor production environments. Sows were single housed the first 2 weeks after farrowing and group housed (4 or 5 sows per group) from 2 weeks after farrowing until weaning, 7 weeks after farrowing.

Background: Diversified companies, for example audit firms, sometimes offer different kinds of products and services. Different key success factors can in the same company thereby evolve. Goal congruence has to be achieved in the business divisions as well as in the company as a whole even though each business segment might have to focus on different factors. Purpose: The purpose is to analyze if differences in technology and culture between the business divisions in diversified companies motivate a differentiated reward system. Method: The study has a case study approach.