The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

ABB Capacitors is looking to introduce LEAN within their organization. The purpose of this research is to suggest ways to improve the production planning in order to facilitate the company?s production processes. This should be done in accordance with the LEAN concept.Today, ABB will produce two of the customers? orders at the same time.

The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

The quantity of methane emissions from sheep depend on several factors, for example, the composition of the diet, feed quality, the age of the animals, time of the day and maybe also breed and sex. A comprising literature review was made about which factors that affect the size of emissions. In addition, a questionnaire was sent to two farms, one with a more intensive Production system and another with a more extensive system. Inventories of the two farms were made; the rest of the data needed to conduct the study was taken from literature and other sources. Meat produced at the more intensive farm caused emissions of 0.4 kg of methane per kg of bone free meat and the more extensive farm caused emissions of 0.9 kg methane per kg of bone free meat.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

The purpose of this report was to obtain an overview of rabbit meat production in the world, in terms of breeding and feeding. It examines how different feed components contribute to the health of the rabbit as well as the quality of the carcass, and the breeding strategies that are most common in the major producing countries. The production of rabbit meat in Sweden is at present not very large, but it is gaining ground, and that is why this paper mainly deals with the rabbit production abroad. This report also examines the disease Rabbit Viral Haermorrhagic Disease (RVHD) in Sweden, where this disease can cause big problems. The rabbit (Oryctolagus cuniculus) is very special, both in its reproduction and digestion. There is no specific mating season and the digestive tract is designed to digest forage efficiently.

Both the German and the Nordic power markets are seeing dramatically changed conditions due to an ongoing process of expanding the share of renewable production in the systems. For the German part this comes from heavy subsidies which have led to an explosive development in installed capacity of photovoltaic and wind based production. After the Fukushima incident it has been decided to shut down all Germanys nuclear plants. This capacity drop is however not of the same magnitude as the increase in renewables, but will impact the stability of the power system. The Nordic power system which already has a surplus of power sees an even further increase, coming mainly from construction of new nuclear plants in Finland and a general increase in wind farms.

This thesis was made possible by the company Verendus system AB, which is the leading developer of dealership management systems in the caravan and camper market. The goal of the thesis was to create a statistics module for a new producer system envisioned by Verendus. The new system is aimed at manufacturers and importers of caravans and campers, with the goal of enabling its users to create more effective production lines. By providing statistical data to mentioned users they will be able to predict market trends and customize their production lines accordingly. Today such software does not exist which leads Verendus to think that its arrival would lead to a success on the market.Before the development and design of the producer system began, a new agile method had to be developed, MAM (Minimum Agile Method).

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

This survey deals with textile production and how it was carried out during the late Iron Age,with main focus on a central place, Uppåkra. A comparison has been carried out betweenUppåkra and two agrarian settlements, Fosie and V. Karaby, from the nearby landscape toinvestigate whether any variation in production can be detected. The value of textiles has alsobeen investigated to determine whether a potential specialization in production may have ledto a surplus.An analytical and comparative method has been used with focus on the context of thematerial.The results show that the textile production vary at the different sites, and that a need fordifferent types of textiles has existed. At Uppåkra, the possibility to produce fine threads andtextiles existed as demonstated by the findings of small and lightweighted spindle whorls.This suggests that the production may have included both fine and coarse textiles.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.