One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

NorFor is a cooperative project between the consulting organisations owned by the farmers in the Nordic countries ? Sweden, Norway, Denmark and Iceland. The project started in 2001 and the outcome, the system for ration calculation NorFor Plan and the model for evaluating the ration NorFor Evaluation, was completed in 2006. Along with NorFor Plan economical optimization are available and according to literature, the optimization will generate a 2 öre lower feed cost per kg milk, and thereby improve the profit for the farmer. The use of NorFor Plan in Sweden for feed optimization during spring 2008 has been very small. In this study eight herds in the middle of Sweden fed half the herd according to the classical system used in Sweden and the other half according to NorFor Plan system.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

This report describes work on the thesis ?IT systems and organizational development?. The work is carried out on Stocksbro Energi AB, during spring 2009. The company wanted better flow in their production but also review if the inventory management function located in Visma SPCS Administration 2000, could be used in the organization. Under the first part of this report the system were tested to ensure if the system would work together with the organization.

How affected are the sugar production in Mozambique and Tanzania by EU sugar regime? What does the EU sugar reform constitute in these countries?Using theories regarding free trade and anti-free trade, I am able to answer these questions. The aim of this paper is to study how the various sugar agreements with EU affect the sugar production in Mozambique and Tanzania. Therefore I am using a method called a most similar system design in this comparative case study. The conclusion is that the EU sugar regime is the main reason to how the sugar productions in developing countries are.

The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

The producers of grain in Sweden are facing a rough future. The competition is getting harder all the time, in Sweden, in EU and also from the ?world market?. The producers have to be more efficient and have to have bigger units. Many producers might have to look for new alternative production opportunities.

During 2007 the City of Stockholm installed five grid connected photovoltaic systems. The aim of this master thesis is to quantify the amount of produced energy and recommend routines to collect and analyse production data, to make production data accessible by the public and to gain experience for future installations.The total amount of produced energy until March 2009 is 227 000 kWh, with an annual rate of 150 000 kWh. The expected annual rate was 148 000 kWh.All system owners are positive about their plants and see economical benefits in scaling up such systems.The installations need very little attendance and maintenance, however it is recommended that an alarm function is installed for automatic feedback in case of a system failure. All future systems should be inspected during full operation to determine if the actual capacity is matching the installed capacity..

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

The print- and mailroom at Gefle Dagblad (GD-tyck) is handling an increasing amount of commercial jobsalong with the newspaper production. Investments have above all been done in the mailroom to be able tooffer commercial costumers a higher degree of finishing and there are plans to expand further in the commercialmarket. GD-tryck is of the opinion that they need to secure the quality of their production to be ableto do such expansion, which is the reason why a quality system of some kind may be appropriate. Howeverthere are no plans to certify such a quality system according to ISO 9001:2000.In this exam report the present methods of working have been analysed from a quality perspective.Suggestions on how GD-tryck should be working with quality development is presented in the fields whereshortage of quality has been discovered. The suggestions taken together do not form a quality system butcan be looked at as ideas of approach to quality fields that have to be developed if a working quality systemshall be accomplished.Many of the quality fields that have been discussed do not have anything to do with technical qualitydirectly but are in some degree requirements for a working quality system.

How affected are the sugar production in Mozambique and Tanzania by EU sugar regime? What does the EU sugar reform constitute in these countries?Using theories regarding free trade and anti-free trade, I am able to answer these questions. The aim of this paper is to study how the various sugar agreements with EU affect the sugar production in Mozambique and Tanzania. Therefore I am using a method called a most similar system design in this comparative case study. The conclusion is that the EU sugar regime is the main reason to how the sugar productions in developing countries are.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.