The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

This master thesis was conducted in order to investigate the effects of the browsing species Yeheb on animal tissues in Swedish landrace goats and to make a literature review in order to increase the knowledge of the importance of this plant for livestock production in Somalia. The evergreen Yeheb bush is a very important feeding source for grazing and browsing animals in Somalia during the dry period. Yeheb contains cordeauxiaquinone that stains the bones of the animals red/pink, which has been an increasing problem when exporting meat to foreign countries. In an experiment, two goats were fed dry and fresh leaves from the Yeheb bush for one and two months, respectively. The goats did not feed the intended amount of dry leaves, since the supply and palatability was not as high as estimated.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This report presents an investment calculation based on an assumed initial investment of a new saw line to an existing sawmill. In order to get as close to reality as possible, we have received data material from northern forest owners who recently made an initial investment in their sawmill in Kåge. In order to calculate and evaluate investments are several different methods, but we, we have chosen to use the discounted cash flow method. The method sums up with the help of a fixed cost of capital together with any future costs and revenues, thereby giving a present value of the investment. We also do a sensitivity analysis to examine how selected factors affect the investment research they change. The study is carried out to a fictitious investment, and therefore the result should not only be studied as a result of the figures. The purpose of this study was that with the help of an investment calculation studying the profitability of a hypothetical investment, and by means of a sensitivity analysis to study the sensitivity of investment to changes. The result demonstrates that the calculations according to the present value method requires a lot of information of the prospective investment.

At the beginning of the 1970´s forestry feared an imbalance in the future wood supply. Because of this anticipated "timber slump" forest companies undertook a variety of measures to counter this. One of these measures was the introduction of exotic tree species. The choice finally ended up with lodgepole pines which were considered a fast growing tree species compared to our native tree species. Theambition for the new lodgepole pine stands were to run these with rotation periods of between 40-60 years, thus smoothing out the ?timber slump? that was anticipated.

IT has become more evident in most organisations and has grown to be a part of the infrastructure rather than a tool for competitiveness. Therefore focus should now lie on how IT is adjusted to the business rather than on the usage of IT. To make the best use of IT in the business the CIO needs to start think more business-oriented instead of as before, technology-oriented. To develop the IT-department in that direction the IT-staff need to start cooperate with the business and gain knowledge about stakeholders, markets and the way of working for other staff members in the business.With this as a basis, the purpose of this thesis is to investigate attitudes regarding cooperation between the IT-department and the business and if there is any difference if the CIO has business related background or not.To fulfil the purpose a quantitative investigation with the help of surveys was conducted. The sample consisted of 18 companies with 100-200 employees in the area of Jönköping.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

This paper analyzes Allt, Martina Lowden's novel from 2006, from a media discursive perspective. The theoretical framework consists of Michel Foucault's discourse analysis, Friedrich Kittler's research on hermeneutic reading, and N. Katherine Hayles's studies of pattern?randomness controlled meaning production. Various examples on how communication technology influences the narrator?s act of writing illustrate the medial discourse surrounding the body of Allt.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.