The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

The future climate of Sweden is expected to become warmer in the future. This would be beneficial for vineyards and may lead to a greater area being allocated for wine production. The environmental impact concerning eutrophication from Swedish vineyards has not been evaluated before. In this study nutrient balances are constructed for four Swedish vineyards with the goal to estimate the out and in flows of nutrient in the systems for the year 2010. Interviews with focus on farming practices undertaken during the year are conducted with the farmers.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

Background The aim of palliative care is to improve the quality of life for both the patient and her next of kin during the patient?s end of life. Palliative care rests on the four cornerstones managing symptoms, communication and relationship, teamwork and relative support. The nurses? task is to assess the patients? physical, mental and spiritual needs according to these four cornerstones.Aim To assess nurses? experiences of treating patients at the end of life.Method Eleven academic journals that respond to the aim has been analyzed and synthesized in a literature review in order to summarize current research on the subject.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

Using the Introductory Carbon Balance Model, ICBM, five different crop rotations with rye 1. Rye-Ley-Ley-Rye-Beans-Rye 2. Rye-Rye-Rapeseed-Rapeseed 3. Rye-Ley-Ley-Rye-Potatoes-Rye 4. Rye-Rye-Potatoes-Wheat 5. Rye-Rye-Potatoes-Beans-Wheat-Rye-Potatoes-Rapeseed were tested theoretically in four different cultivation scenarios ? Straw left on the field, biogas digestate added as fertilizer. Labelled ?+straw+BD?. ? Straw left on the field, only synthetic fertilizer. Labelled ?+straw-BD?. ? Straw harvested, biogas digestate added as fertilizer.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

The Swedish forest policies have earlier mainly been focused on two goals: production and environment. The production goal aims to benefit the economical gains from forestry while the environmental goal primarily aims to shield the ecological values of the forest. With the introduction of the Swedish environmental code and the environmental objectives it was made clear that the overall objective for Swedish community development, including the forestry sector, is sustainable development. Sustainable development includes supporting economic, ecologic as well as social values of which the latter seems to have been forgotten in the forestry sector. This was recently brought to attention to the sector and the debate how to handle the social values is now ongoing.The legislator has not been unaware of the social values since they have since long been at least somewhat included in the preliminary works.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

The following is an examination of work and gender and how they interlocked in a Swedishbrewery between 1923 and 1939. Leaning on labor process theory and Marxist feminist theory,this paper examines what constituted women?s work in the brewery industry in this era, how women?s work changed with rationalization and economic recess, and how the all-femaleunion locale reacted to these changes. The events portrayed are related to earlier research ongender on the labor process, to the history of the Swedish labor movement in large, and to theevolution of the so-called ?Swedish model? with its relatively low level of conflicts on thelabor market.

This work describes the process from sketch to functional textile. Starting points are thoughts about the transition from sketch to fabric, and the possibility to sketch before decisions are made about the quality of the final fabric. The first result of this study is the final product, a hand weaved clothing in thin wool that fulfils set demands. The second result is the knowledge that it is possible to make a purposeful sketch without knowing the final product..

In modern society globalisation is a fact within all industries, the textile industry included. Due to improvement in areas such as logistics and communication international trade have developed fast. As changes occur rapidly on the global market and companies must adjust and revise their processes in order to stay competitive.Because of the global price reduction consumers around the world expect low-price products, which mean that the companies have to find new ways to produce in a cost-efficient way. To maximize profit most of the textile production is situated in low-cost countries due to its labour-intensive character. It is crucial for fashion companies to allocate their activities in their value-chain effectively in order to reduce lead-times.

The trend towards increasingly large farming units raises questions regarding how to better monitor production. Larger units make the impact from possible errors more severe, which increases the pressure on management supervision. To cope with management issues, prevent errors and handle increased demands on traceability and documentation, the Real Time Location Systems (RTLS) concept is making its way into various parts of agriculture. In sectors outside agriculture, RTLS are already being used successfully to track and locate items through nodes at different levels of accuracy, such as room level or the relative or absolute position. Empirical data can be received in real time from the nodes.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

At Uppsala university scientists have during the last years developed and built wave energy converters. This project is called "Lysekilsprojektet". The development has come so far that they are currently investigating how to gain profit in a mass production. For that reason they want to automate as many steps in the production as possible.The winding of the stator is one part that is being automated using industry robots. The stator is cable wound unlike many other generators.