Small!size!enterprises!within!the!outdoor!industry!seldom!use!a!structured!process!or!method!when!involving!users!in!product!development.!One!reason!for!this!is!that!many!structured!development!processes!are!designed!for!large!companies!with!very!different!resources.!When!involving!users!in!product!development!processes,!the!most!common!user! is! an! elite! athlete.! She! or! he! often! has! different! requirements! than! the! regular!consumer!and!in!the!customers?!point!of!view;!this!leads!to!nonCmaximized!developed!products.!!The! result! of! this! thesis! is! a! user! involvement! process! for! small! outdoor! companies!based! on! the! Sister! Kenny! Research! Center! Innovation! Handbook,! a! product!development!process,!which!itself!is!based!on!a!phaseCgate!model.!The!process!focuses!on!the!user!category!enthusiastic!amateurs,!since!this!is!what!companies!in!the!industry!require.!The!process!also! focuses!on!how!and!where! small!outdoor! companies! should!involve!users!and!give!recommendations!on!how!many!users!that!should!be!involved!in!a! product! development! process,! different! from! what! the! theory! recommend.! The!process! also! builds! on! that! ideas! should! come! from! the! users! first,! and! then! being!further!developed!by!the!company's!product!developers.!The!degree!of!communication!between!users!and!the!company!is!shown!and!the!report!clarifies!the!user!involvement!intensity!in!product!development!processes.!!The!involvement!process!that!has!been!developed!has!also!been!summarized!in!a!guide!that! can!be!used!by! a! company!on! a!daily!basis.!This! contains! information!on,! among!other!things,!how!users!are!selected!and!how!to!plan!a!workshop.!!! !.

Domestication has resulted in the ability for animals to adapt to environments created by the human over time. The behavior differs very little between wild and domesticated animals, but the difference seen is how often and to what degree a behavior is performed. The need for efficiency in modern animal production has led to welfare problems in the productionsystems where the animals have difficulties coping with their environment. Attempts to environmentally adapt individuals by selection for reduced frequency of natural behaviours have been made. These have shown that natural behaviours are complex and are controlled by several different mechanisms, making selection for reduced natural behavior difficult, and it may also lead to unwanted and abnormal behaviours.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

The purpose with this thesis is to analyse different factors that can explain district heating prices for energy companies in Sweden. We are further interested in examining if the prices is affected by the use of industrial waste heat in their production and the company?s ownership structure. The method applied is a multiple regression analysis using a panel data set of 50 companies over 5 years (2008-2012). The data used is yearly data obtained from the Swedish district heating association.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.

In process oriented organizations, it is important to have well-functioning work processes tosupport the work being performed. In order to accomplish this, the organization has to makecertain decisions regarding the design and usage of the processes. This master thesis is based ona case study of a work process that is being used for the industrialization of products at Ericssonin Katrineholm. The aim of the study is twofold. One aim is to improve the studied process byidentifying improvement opportunities and carrying out the required adjustments.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

AbstractTitle: The first thing I do when I wake up is to log on to Facebook. A study regarding how users of Social Networks experiences the User Generated production. (Det första jag gör när jag vaknar är att logga in på Facebook. En studie om hur användare av de sociala nätverken upplever den användargenererande produktionen.)Number of pages: 37 (39 including enclosures) Author: Per MagnussonTutor: Christian ChristensenCourse: Media and Communication Studies CPeriod: Fall semester 2010University: Division of Media and Communication, Department of Information Science, Uppsala UniversityAim: The ambition with this essay is to examine how the online users of social networks experience the development of the Internet towards Web 2.0, and the enormous User Generated Content emerging from it. How do we receive User Generated Content from other people, and particularly what do we think about our own production.Material/Method: In order to obtain a deeper understanding of the attitudes and perceptions amongst people regarding this subject I used qualitative interviews with 9 people.

The Swedish consumption of lamb a increasing, and today we yearly eat a kilo of lamb per person each year. As a consequence the Swedish degree of self production according to lamb is steadily decreasing, and is today about 39 %.Today Swedish Meats is now cooperating with the Swedish lamb breeders organisation to raise that percentage. At the same time the European Union presents a new agricultural reform, the MTR (Mid Term Review). The shape of this new reform is not yet fully known, but the general policy has been more or less outlined. The new reform is split into three propositions: the farm model, the regional model and the mixed model.

The price of farmland has risen sharply in the last 20 years. This has led to discussions about what creates the value of farmland. The aim in this study was to try and find what factors are affecting the price on farmland. The area that is studied is the counties around Mälardalen during the period 2005 to 2009.The method chosen to achieve the objective is the hedonic price model. The variables are chosen after a preliminary study where a literature search has been made and a number of interviews with people in the industry.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a factory.

At the Skoghall pappermill, sulphatepaper pulp is produced in a continuous digester originally from 1969. To be able to maintain a high level of production there is a need for a process with few disturbances. Variations in how well the wooden chips are packed in the digester is one form of disturbance. Today there are no available measurements on how well the chips are packed. Instead this is regarded as being constant.