The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

Examensarbete, civilekonomprogrammet, Ekonomihögskolan vid Linnéuniversitetet, ekonomistyrning, 4FE03E, VT 2013Titel: Lean Productions påverkan på ekonomistyrningen - En fallstudie inom Gnutti   Powertrain ABBakgrund: Allt mer konkurrensutsatta marknader har inneburit att företag sökt nya sätt att utveckla och effektivisera sina verksamheter. Detta har resulterat i att många företag valt att införa produktionsstrategin Lean Production. Flera forskare har påvisat att den traditionella ekonomistyrningen inte är anpassad till och lämplig för företag som använder produktionsstrategin Lean Production. Detta har inneburit att den traditionella ekonomistyrningen måste förändras och utvecklas för att kunna stödja de förändringar som den nya produktionsstrategin ger upphov till. Därmed blev det intressant att studera ett enskilt fallföretag för att identifiera om och hur detta företag har förändrat sin ekonomistyrning till följd av användandet av Lean Production. Syfte: Syftet med denna studie är att utifrån det enskilda fallet Gnutti Powertrain AB bidra med en förståelse för hur ekonomistyrningens utformning och användning påverkas av användandet av den avancerade produktionsstrategin Lean Production.

Today´s debate in farming is being focused on tourism, outdoor life and hobbies in the rural areas. This is of interest also for the general public as a way of counteracting the depopulation of the rural areas. Within the last years, the farming has become more technically advanced and hence efficient. This has led to increased production volumes and wider selection of products with lower margins for the farmer as a consequence. When the profitability is reduced, the farmer is faced with the choice of either increasing efficiency or diversification of the business.

This essay analyses how Swedish authorities implement the EU regulations on the application of social security schemes and, more specifically, when it comes to health care and sickness benefits. The research is based on a survey and several interviews and aims to answer how the lower echelons of the hierarchy work towards the implementation, what are their working conditions and how the authorities evaluate and optimize the implementation process.The general conclusion of the study is that there are several flaws in the implementation process. The results have shown that there is a lack of resources as well as of tutoring and education amongst the actors. The complexity of the regulations does also seem to have influenced the process. Finally the results have shown that the public instances do not proceed to a systematic evaluation of the implementation process which has led to a bad communication between the different actors as well as to difficulties in improving the flaws in the implementation process..

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

The Sheep is the oldest livestock, and has been in Sweden for 4-5000 years. Thanks to that you can obtain skin, as well wool and meat. Therefore it was an important animal. Sheep production has increased, strongly lately due to the pasture support. The purpose of this paper is to find out what kind of different EU-subsidies you can get and to compare the subsidies in Öland and the main land. Sheeps are very good conservationist with grass, bushes and herbs, because of different grazing lands hardness and growth is it important to control the pasturage strain. A good way to regulate this is to have different enclosed pasture to switch between. I have been studying the different EU-subsidies.

Farmers are constantly facing changes, and the exposure to risk requires monitoring these changes. Financial risks, institutional risks, market risks and production risks are the different risk categories that the farmers face. Production risks stems from factors the farmer cannot affect or is beyond his control. The crop?s output is the basis for the primary income of agricultural operations, which is why it is important for farmer to manage their production risk. A tool to reduce the consequences of production risks is crop insurance.

This research outlines studies about the relationship between social integration process of Japanese immigrants in Sweden and how social media assists in this process. The purpose of this research includes: To find out the reasons of migration to Sweden for six Japanese immigrants, any difficulties that they faced at the beginning of their immigration process and/or any positive qualities that they found in living in Sweden, whether they have accessed social media since they have moved in, if they do so, how the social media has been used and also, whether the social media has had a role to play in contributing to help their social integration process. In addition, it has been considered whether the participants have plans to return to Japan. In Sweden, there is relatively small Japanese migrant population. This social science research paper is the first in Sweden which explores the immigration process of Japanese migrants into Sweden.

Cultivable land is a limited resource and agriculture contributes to some of the most serious environmental problems facing the planet like, global warming, eutrophication and loss of biodiversity. The specialized, industrial agriculture with monoculture and extensive input of external energy, commercial fertilizer, and chemical pesticides are all essentially unsustainable. An adaptation to other methods of production is necessary to preserve the environment for future generations. The aim of this study is to describe the factors that distinguish sustainable from unsustainable agriculture. The results will be used to examine if and how the European Union (EU) works in order to create a more sustainable agricultural industry and to analyze the preconditions for such development.

The structural rationalization of rural firms in Sweden has led to many new creative ways of developing companies. The agriculture sector is characterized by the need of capital in form of buildings, labor and inventory. The rationalization process has led to free capacity in rural firms when new technology make buildings and inventory not longer necessary for the Production process. To get a better cost coverage this free capacity can be used to start-up new business areas that help the rural firm to growth.The study aims to identify factors that motives entrepreneurs in rural firms to develop new business areas. The purpose is also to analyze driving forces that lies behind development of rural firms and the forces that support or not support development in rural firms.The study is built upon five cases that all can be categorized as firms with different size and orientation.

SammanfattningSegerström Automotive tillverkar plåtkomponenter till kunder som Scania, Stiga och Volvo. Företaget befinner sig i en expansiv fas, men konkurrensen på marknaden är hård och kraven på god kvalitet höga. Företaget är kvalitets- och miljöcertifierat. Som del i förbättrings- och kvalitetsarbetet har en nystart av verksamhetens produktionssystem, SAPS (Segerström Automotive Production System), skett. Ett av företagets mål för de närmsta åren är att minska antalet externa reklamationer.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

Syfte - Syftet med studien är att få en djupare insikt i sambandet mellan ledarskap och de faktorer som bidrar till ökat engagemang hos medarbetarna i arbetet med ständiga förbättringar. Studien riktar sig mot ett mellanstort industriföretag som implementerat lean production.Design/ metod - I vår undersökning valde vi att göra en kvalitativ fallstudie. Data samlades in i ett svenskt industriföretag. Totalt har 7 intervjuer genomförts.Undersökningsresultat - Resultatet vi kom fram till är att medarbetarna är i låg utsträckning delaktiga i förbättringsarbetet. Tidigare forskning visar att medarbetare som är delaktiga i beslut är också mer engagerade i arbetet.Metodkritik ? Resultatet speglar enbart subjektiva bedömningar och de studerade variablerna bygger på respondenternas uppfattningar.

The purpose of this essay is to analyse how the leadership and the structure of the organization affect the process of changes within a specific department in Lunds kommun socialdepartment, from the director of social work to the co-workers at Utredningsenheten för ungdom och familj. We aim to answer the following questions;How does the structure of organisation affect the process of change?What do the co-workers and the leaders believe is the best way to engage the co-workers in the change?How does the leaders view their own leadership in the process of change?How does the co-workers view the leadership in the process of change?How does the leadership affect the process of change?To develop an organisation and to make it a functional, change is a necessity. The leaders are they who create the change but the co-workers are they who make it happen. In the process of change, leadership and the leaders capacity to create motivation for the co-workers, is therefore a matter that is decisive to its success.This is a study based on a qualitative method, where the interview is the main source of empirical material.