During the middle of the 18th century the development of Toyota Production System, TPS, started in order to streamline the processes. TPS was based on the principles of assembly line production but unlike previous performers Toyota let the manufacturing be constantly affected by demand. At the end of the 18th century TPS was described by Womack and Jones in the book "The machine that changed the world - the story of lean producion" where TPS got the name lean. The principles behind lean is to maximize customer value and eliminate waste which means making products and services more valuable to the customer. 1Lean was for a long time a philosophy and an approach limited to industries and production based companies.

Due to the obvious fact that one can never be hundred percent sure of what's hiddenunder the ground surface, construction work is naturally hard to project.However, many of the work methods are executed in the same way on variousprojects. The department of construction work at JM AB region öst describes a lackof follow-ups and feedback between the calculators and production managers.In this thesis we have studied the communication between these groups and alsohow they share experiences and knowledge. In order to get the full pictureof the day-to-day operations we used three methods to gather information. Studyingliterature gave basic knowledge of theories about feedback, and thenecessity of working with giving feedback. In order to understand the process ofconstruction work we made several interviews, both structured and nstructured.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Due to the technical development the enterprises of today are forced to creative thinking when it comes to marketing of their products. An example of one of these new methods are the development of product placement which has come to an interesting turn namely advertiser funded programming (AFP). Instead of the product just being a small part of the storyline it has become the story itself. The purpose of this study is to analyse how the advertiser funded tv-production Roomservice, a Swedish home styling program, communicates with it?s viewers as well as how they perceive the message.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

This thesis has aimed to study steering process and institutionalization in the context of educational policy work. This has been conducted by using empirical material from the political decision-making process that preceded the implementation of a new national program on how principals should be educated and certified. By using an aggregated theoretical point of view containing new institutionalism and traditional Swedish curriculum theory, the process was analyzed from different perspectives. The results depict a process that contained several actors who tried to shape the principal education program differently. From the theoretical perspectives, the decision-making process could be understood as an act of both self-interest as well as trust in their own beliefs and cultural values.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.

Syfte: Syftet med studien är att belysa forskning och litteratur kring Lean Production utifrån två vetenskapliga synsätt. Studien syftar även till att undersöka en organisations införande av och arbete med Lean Production, för att kunna ge praktiska bidrag om hur detta arbete kan fortskrida.Metod: Studien har genomförts med en kvalitativ och öppen ansats inom ramen för en fallstudie i samarbete med Sandvik Materials Technology. Empiriskt material har samlats in genom intervjuer och observationer med och av operatörer, produktionsledning och stabspersonal. En omfattande analys av litteratur och forskning kring Lean Production har legat till grund för en teoretisk referensram.Resultat & slutsats: Belysningen av Lean Production visar att systemsynsättet beskriver konceptet som ett säkert recept för framgång, trots sin förenklade syn på organisationers påverkan av omvärldsförändringar. Det socialkonstruktivistiska synsättet visar att Lean Production har en legitimerande funktion i organisationer, men ger liten kunskap om de förändringar som sker i organisationer.

Recent years there has been discussed how the critical situation in the housing market threatens the Stockholm region's growth. The thesis objective is to examine whether there is a scientific link between the lack of housing supply and growth. The thesis also intends to identify solutions for increased housing construction, for instance by examining the conditions for a greater regional perspective and influence on the region's housing supply. The thesis empirical study is based on semi-structured interviews with representatives from the Government, municipalities and the housing industry.In Sweden, research on the relationship between housing shortages and growth has not been conducted to that extent it can be said to exist scientific evidence regarding the growth threat. However, in Britain and the U.S, empirical studies show that a lack of housing supply has hindered growth through negative impact on countries' gross domestic product.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

Our project is divided into two parts, one production and written report. The main focus was the production part, were we used PHP to create simple solution for handling SMS and MMS with direct communication with the mobile operator server. We communicate with sockets and can handle CIMD2 and MM7 protocol. To get our components easy to use we have created two classes to handle SMS and MMS. To demonstrate our technical platform we created a website were you can create an account.

Soybean meal from South America is the most common protein feed used for animal production in Sweden. Production of soybean has negative effects on the environment and the transports from South America to Sweden causes considerable CO2 emissions. Therefore it is a growing interest in locally produced protein feed in Sweden. Protein feeds that are possible to grow in Sweden are rapeseed, peas, faba beans and lupins. Those are adapted to the Nordic climate and are perfect to grow in cereal rotations.

Beef production in Sweden has traditionally been about rearing of dairy calves to slaughter. With reduced number of dairy cows and accordingly less dairy calves for slaughter, there has been a need for new forms of beef production in Sweden. In Västerbotten there are good conditions for beef production with a high feeding level of roughage due to favourable climate. The aim of this thesis is to, through interviews with ten farmers with beef production in Västerbotten, study what and with how much they feed their animals and link the results to production level. The thesis begins with a literature review where the general feeding standards and feeding recommendations for beef cows and growing cattle are examined.

Turkey?s nearly fifty-year-old aspiration for admittance to the European Union took a crucial step forward with the signing of the Ankara agreement in 1996. The aim of this thesis is to examine the trade effects that evolve from the creation of a customs union. Our objective is to study how Turkey?s trade patterns adapted to the liberalized trade by examining the effects on resource allocation, specialization and welfare.