The aim of this study is to analyze how intercommunication between offenders are presented with artefacts during the planning and implementation of a robbery in a cash depot in Stockholm. The methodological approach is based on empiricism from police investigation protocols, which leads this study to a case study. The ambition is to analyze the empirical material from a sociocultural perspective. The results shows that the offenders use artefacts to plan the crime with artefacts within an internal intercommunication between the offenders. After the planning artefacts such as a helicopter, explosive material, telephones, saws and ladders have been used in an intercommunication to implement the robbery which leads to an analysis that hierarchy depends on the role of the artefacts, only when technical artefacts are included in the term of hierarchy..

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

What is a city? What do we mean when we describe something as urban? In what way should we build the city so that we can achieve a good environment for our own generation and for generations to come? These questions are constantly of interest and they are frequently discussed. It is also important to have considered these questions when working with city-planning. This essay contains a description of and reflections about the recurrent questions in today?s debate about the city and city-planning.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

Under de senaste decennierna har det svenska samhället genomgått stora förändringar där urbaniserings- och globaliseringsprocesser har lett till en ökad inflyttning till storstäderna, därmed har ett ökat krav ställts på städerna och dess stadsdelar. I storstadsområdena finns idag en stor variation av hushåll och i olika sammanhang har ett antal bostadsområden i storstadsregionerna pekats ut som socioekonomiskt utsatta. De flesta av dessa tillkom under det så kallade miljonprogrammet under åren 1965-1975 och har idag en mycket varierad befolkningssammansättning där en stor del av invånarna exempelvis är av utländsk bakgrund. Bebyggelsen från miljonprogramsåren visar på dåtidens bostadspolitiska målsättningar och välfärdssamhällets ambitioner, en vision om det nya samhället och den moderna människan. Denna vision har idag till stor del glömts bort och sedan de första miljonprogramsområdena påbörjades har en debatt kring dessa områden blossat upp i massmedia.

Den övergripande avsikten med denna uppsats är att försöka ge en nyanserad bild av organisationsreceptet Lean Production. Vidare försöker jag utröna vilka potentiella vinster och risker som kan tänkas uppträda i samband med implementeringen av Lean Healthcare på Universitetssjukhuset i Lund. Utgångspunkten för denna analys är Region Skånes verksamhetsmål gällande personal, patienter och ekonomi. Analysen visar att det inte är helt okontroversiellt eller oproblematiskt att anpassa och införa produktionssystemet. Allvarligast verkar konsekvenserna kunna bli för tillgodoseendet av personalmålen, medan det ser mindre problematiskt ut gällande de ekonomiska målen och patientmålen.

The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

The aim of the thesis is to analyze the role of regional development planning concerning a regional perspective of green structure and to reflect on its future role. The target group of the study is foremost practitioners but also students of regional planning and development. Three questions are examined. 1) What view concerning green structure has the regional planning body of Stockholm County Council (RTK) communicated through the years? 2) Has this view contributed to generating a common understanding concerning green structure among the actors in the county? 3) Has this common understanding been referred to by actors in discussions concerning how this green structure should develop? The empirical material consists of documents from rtk, the County Administrative Board, the municipalities of the county, a network of ngo:s, as well as interviews with representatives from the above mentioned organizations.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

SammanfattningDetta examensarbete är ett utformningsprojekt av en platsbyggd villa. Frågeställningen tillprojektet var hur man kan utforma en villa.Jag har undersökt vilka A-ritningar, K-ritningar samt statiska beräkningar som behövs för attproducera en platsbyggd villa.Resultatet visar färdiga ritningar till bygghandlingar vilket betyder enplans villa medattraktiv/öppen planlösning och en stark byggnadsstil med tydliga inflytanden av funkisstil.Detta tydliggörs genom pulpettaken, och fasaden som är delvis liggande panel, delvis vitputsad.Yta: 153 kvmAntal rum: 6, varav sovrum: 3.

Syftet med detta kandidatarbete är att studera begreppen offentlighet och det offentliga rummet. Med hjälp av inventering på plats samt litteraturstudier analyseras en offentlig plats, Amiralitetsparken i Karlskrona. En utvärdering av platsens kvalitéer och brister följs därefter av ett förslag till omgestaltning av parken, som nyligen varit föremål för en arkitekttävling. Med hjälp av texter av Jürgen Habermas och Hannah Arendt förs inledningsvis en diskussion kring begreppet offentlighet och varför det offentliga rummet är så viktigt. Därefter beskrivs det spänningsfält mellan auktoritet och tillgänglighet för allmänheten som präglar många offentliga platser, däribland Amiralitetsparken i Karlskrona. Vidare beskrivs och jämförs några nyanlagda parker i Sverige och ett försök görs att hitta typiska drag i dessa samtida parker. Träden i parken har inventerats med hjälp av muntliga anteckningar,det vill säga ljudinspelningar, som gjorts på plats.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

As the European Landscape Convention is brought into action, planning in Sweden has got to become increasingly considerate of the landscape and its character. To render this possible, a basic requirement is that we find a functional method for analysis. The Landscape is a synthesis of the interplay between place and man. It is made up of our physical environment and shows the result of our actions throughout history. Our surroundings affect us in many ways, financially as well as emotionally. This is why an analysis of the landscape has to be inclusive of many types of information. I have performed a landscape analysis, according to the British Landscape Character Assessment-method, in Svedala kommun.