Dairy farmers using artificial insemination (AI) are dependent on effective oestrus detection. In Sweden, AI is used for a majority of all dairy cows and oestrus synchronisation with hormones is not allowed. There are reports of declining ability to express oestrus with higher levels of milk production. This makes oestrus detection more difficult. Several aids for oestrus detection have been developed, for instance pedometers and mounting detectors.

In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

In Sweden, the main responsibility for urban planning lies with the municipalities. The county administrative boards are responsible for clarifying the governmental interests for the municipalities. The main purpose of this essay was to study documents with descriptions of national heritage areas in order to examine whether certain problems within these documents are still present in the most recent ones. This was done by comparing old documents with new ones. The problem with these kinds of documents has been the lack of clarification of cultural values in national heritage areas.

The aim of this study has been to discuss ideas of knowledge within classification theory and subject analysis in the light of theories of fundamental changes in the production of scientific knowledge. Guiding questions have been: How have the conditions of knowledge production changed? How has interdisciplinarity as part of this development evolved? What assumptions lie behind theories of classification and subject analysis? How do these stand in relation to the alleged changes in the production and understanding of science? Three works about the changing conditions for knowledge production and the growth of crossdisciplinarity have been presented and discussed. These works stress the loosening up of boundaries between traditional knowledge domains and open up for discussions about how to organize knowledge production in the light of these changes. In the study it is argued that their works also could open up for discussions about the way knowledge is organized for retrieval purposes.

Goal-Oriented Action Planning (GOAP) är en AI-arkitektur som tillämpar ett måldrivet beteende åt agenter i spel. Mål uppnås genom att planer med åtgärder genereras med hjälp av en sökalgoritm. Syftet med denna rapport är att undersöka hur två sökalgoritmer, A* och IDA*, presterar under planering i GOAP.De experimenten som används är dels en miljö där agenter simuleras, samt ett test där planer genereras för samtliga implementerade mål utan rendering och simulering av agenter. Data som utvärderas är bl.a. planeringstiden, antal besökta noder under sökning och genererade planer.Utvärderingen visar en tydlig fördel till A*, som i snitt är 38 % snabbare än IDA* vid planering av åtgärder i GOAP.

The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

Background: Since the coining of the phrase lean production by Womack, Jones and Roos in 1990, this mass production system of Japanese origin has been implemented in a multitude of organizations throughout the world, the results being predominantly positive from a financial point of view. The possibly negative effects of mass production on worker motivation have been discussed since quality of work life became an important political issue in Sweden in the 1970?s. As the popularity of lean service is now increasing, there are still unresolved issues regarding the transferability of a mass production system to the service industry, particularly with regards to the motivation of service employees.Purpose: The purpose of our thesis is to study the lean system of a Swedish bank, SEB Way, from a management- as well as an employee perspective in order to describe how lean may affect the work motivation of service employees.Research procedure: The study is empirically based on observations and interviews on multiple hierarchical levels at SEB. We have conducted a total of 13 interviews with front line employees at SEB, with the central SEB Way team as well as two external lean specialists.Results: The study indicates that SEB Way has little direct influence on the intrinsic work motivation of the SEB front line employees, as work motivation was present prior to the implementation of lean.

The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price. They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The aim of this study was to investigate the production of knowledge that can emerge in the use of Practice Research by Mirror method. This by finding out what it is in the practical work that leads to the production of knowledge and how knowledge production takes form. The empirical data that form the basis for this study is recorded group within the Mirror method discussions and a focus group interview with social workers who participated in the discussions. Those who have participated are social workers with experience from working with financial aid support and only real cases have been used in the discussions. The results have been analyzed according to Lipsky's theory of street-level bureaucracy and their discretion and Fook and Gardner´s theory of critical reflection.

The paper is a thesis made by three students in the engineering program at Jönköping School of engineering. The thesis was overseen by the urban planning office and features data from Jönköping County.The purpose of the thesis is to improve future central districts by improvement of work methods. The aim of this thesis is, through an evaluation of process mapping, develop a model for systematical work methods with better experience feedback in the urban planning. The following three questions have been answered:? How is the process mapping of the urban planning in Jönköping County built today and how did it affect the current district Kålgården?? How can the urban planning of Jönköping improve with a more systematical work method with better experience feedback?? How can critics elaborate the developed method to make it enough stable and in general applicable method to enforce on future districts?Literature studies and interviews were made to review the work methods of the office of urban planning as well as how their experience feedback works.

This report aims to suggest recommendations that will increase the efficien¬cy in theconstruction process of a construction project. Through interviews, studies of budgetcalculations and examples given by the project management at the construction sightsan understanding of some complications have been gained. These complications havebeen tracked back in an attempt to find the source of the problem, and at the end ofthe report some suggestions have been presented with the pur-pose of preventingthese complications. Through the interviews it is suggested that many complications re-late to lack ofcommunication and motivation due to poor planning be-fore and during theconstruction process, a suggestion that is supported by the study of the budgetcalculations. The examples from the project management also points out someshortages in planning, but also coordi-nation related complications due to lack ofcommunication. To prevent these problems the recommendations suggested at the end of thisreport aims to improve the planning process through a properly fulfilledwalkthrough-planning of all of the construction activi¬ties during the time needed todo so. It is also suggested that the company uses experience from previous projects inorder to reduce costs, and that the qualifications of the employees is being appliedwhere it is needed.

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..