Sökresultat:
3711 Uppsatser om Production of space - Sida 9 av 248
Energianalys av etanolproduktion : en fallstudie av Lantmännen Agroetanols produktionssystem i Norrköping
In this thesis an energy analysis of ethanol production at the ethanol plant of
Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has
been studied in combination with Händelöverket, the combined heat and power
plant which provides the ethanol process with steam. The purpose of this study
was to determine the energy consumption for the whole production chain from
grain to ethanol. The analysis has included the energy consumption for cultivation
of grain, production of chemicals, the production chain for wood chips, the steam
production and the ethanol plant. The grain and wood chips are both considered
raw materials there for the energy content in these are not included as energy input
in the system.
Energianalys av etanolproduktion : en fallstudie av Lantmännen Agroetanols produktionssystem i Norrköping
In this thesis an energy analysis of ethanol production at the ethanol plant of
Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has
been studied in combination with Händelöverket, the combined heat and power
plant which provides the ethanol process with steam. The purpose of this study
was to determine the energy consumption for the whole production chain from
grain to ethanol. The analysis has included the energy consumption for cultivation
of grain, production of chemicals, the production chain for wood chips, the steam
production and the ethanol plant. The grain and wood chips are both considered
raw materials there for the energy content in these are not included as energy input
in the system.
Lean inom den svenska bankbranschen : En studie av svenska storbankers arbete med Lean
Lean Production har sedan länge enbart varit förknippad med tillverkningsindustrin och främst Toyota genom Toyota Production System(TPS). På senare år har Lean Production i allt högre grad introducerats och integrerats i tjänsteföretag under beteckningen Lean Service. Bankbranschen är en bransch där aktörer globalt anammat de bakomliggande filosofierna av Lean Production och Lean Service. I det här arbetet har en undersökning gjorts kring huruvida Lean Production existerar inom svenska banker och om så är fallet hur filosofierna inom Lean Production präglar bankerna. De tre bankerna som valts för undersökningen är de svenska storbanker Nordea, SEB och Handelsbanken.
Rörelsemönstrets betydelse : Att öka attraktiviteten i en galleria med Space syntax
The functional connection between the building and the streetscape affects the city and its attractiveness. Stores located in shopping malls with their entrances facing internal walkways, creates segregation between the mall and the streetscape. This segregation implies that the shopping mall loses some of its attractiveness, which may result in a so-called Greyfield mall. The expression Greyfield mall is used for shopping malls that have lost its visitors. Competition from new modern malls and a lack of investments are examples of factors that influence the development of Greyfiled malls.
Telekomspecialisering i Östra Europa - Integrationens betydelse för en produktionsfragmenterad industri
One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.
Framtidens studerandemiljö : En studie om utformning av studerandemiljö på Umeåuniversitetsbibliotek
A Large part of the education provided at colleges and universities of today requires for thestudent to be more independent in their studies. This demands that the physical space,where the students choose to study, is designed in a way that can encourage and supportlearning. It seems as though that many of the learning spaces of today don?t always meetthe students? needs. The university library at the University of Umeå is currently planningto design new learning spaces for the students.
Integrated Green Spaces in Urban Areas : a case study of inner Brisbane
The review of Integrated green spaces in urban areas ? A case study of
inner Brisbane highlight the significance of addressing characteristics,
qualities and landscape values in our outdoor environment. The importance
of green spaces to the wellbeing of people in the city and the ecological,
social and cultural values they carry are widely recognised in the
field of urban and regional planning. At the same time population growth,
climate change and urban development put planners and scientists in a
challenging position where new solutions must be put on the agenda in
order to accomplish sustainability. Open space strategies, collaboration
between stakeholders, public participation, learn from earlier failings and
a ?value-led? approach facilitate the managing of open space.
Brisbane is located in the fastest growing metropolitan region in Australia.
The city´s open space landscapes offer cultural, geographical, recreational,
social and scenic amenity assets, which make a major contribution
to the regions identity they a wide world known for.
Sitkagranens potentiella merproduktion jämfört med vanlig gran i Hallands län
Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden.
This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation.
The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.
Visualisering av produktionseffektivitet : Utveckling av ett verktyg för övervakningav avbrott och presentation av TAK
Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.
Vattenjärnhaltens betydelse för mjölkkors hälsa och produktion :
Drinking water from drilled wells has a high content of iron and other minerals in many places in Sweden. Questions about the association between the quality of drinking water and the health of dairy cows are regulary asked both by advisers and dairy farmers. There are so far not many studies published about the relevance for high iron content in water and dairy cow health and production. Therefore, the aim of this study was to investigate if there is a connection between the iron content in water and the health of dairy cows. Initially a literature study was made about iron and it´s function in ruminants.
Vägen mot flexibilitet : En studie av Sex Sigma och lean production inom industrin
This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.
Där horisontellt möter vertikalt : en studie av hur fasaden och gatan påverkar upplevelsen av stadsrummet
This paper is about the facades and the streets impact on theexperience of the city and how architects can create cities forthe human kind with simple tools that makes a hugh difference forthe experience of urban space.As the cities are growing in a faster rate and as more people moveto the cities, they will also affect more people. The differentstructures that can be found in the cities therefore gets moreimportant and giving design to city structures also gets morecomplex because of our higher demands on urban functions andcontent. It?s difficult to evaluate the ultimate city structuresince all people experience their city in different ways, butarchitects still should be able to create urban spaces thatis suited for the human kind, just as we can create differentbiotopes for flora and fauna. Therefore there must be generalideas of what the human being experience as good or bad and theseshould be guidelines when designing urban space.Since urban space is something that most people experience everyday it doesn´t always have a clear impact on them.
Expansionsmaskiner istället för strypventiler - en effektivisering
In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.
Miljöpåverkan av äggproduktion : En jämförelse mellan Lilluns ägg och andra svenska äggproducenter
The purpose of this report was to compare Lilluns egg production with other Swedish egg producers based on the flow of nutrients (nitrogen, phosphorus and potassium) in the egg production systems. The main focus in the report was the utilization rate of the forage and the excess of nutrients per kg egg. Additionally, the purpose was to identify the environmental impact from Lilluns egg production and compare the results with other egg producers. The inflow of nutrients associated with forage and poultry was compared with the nutrients that were exported from the production. All of the egg producers in this study had an excess of nutrients.
Effektsekvens på hal is
Detta examensarbete handlar ?Verklighetstrogen Effektskomposition?. Målet med arbetet är att undersöka och utnyttja alla de olika aspekterna som gör att en film med specialeffekter känns så verklighetstrogen som möjligt. Arbetet handlar om de olika delarna i en filmproduktionsfas så som pre-production,production och post-production. Filmen som skapas är en specialeffektsbaserad hemmavideo som har som syfte att vara så chockande som möjligt i förhållande till vad man förväntar sig när man börjar kolla.