This two years master?s thesis takes interest in the concept of marketing related to the Children?s Library. The purposes have been to investigate the perception of marketing among a few librarians working at the Children?s Library in the Swedish region of Halland and further to analyse their perception of marketing in the daily work at the library. Eventually to analyse the consequences of these librarians approach to marketing related to their perception of the library?s mission.

This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..

When a company in the manufactory industry makes costly investments, it's important that these are used as much as possible. The company in this case claims that their invested robot cell, with CNC machine isn't used enough. The questions here are: How can we improve the use of the robot cell? Which products are appropriate for the production in the robot cell? As a method to come to a conclusion, an analysis has been made over the manufactured products. And also interviews with machine operators and the production management.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

In this paper an upper level compulsory school is examined from a gender perspective. The purpose of the paper is to analyse how girls and boys acquire space in the classroom (during a Swedish lesson) and in the sports hall (during a lesson in physical education). To fullfil the purpose of this paper a seventh grade class was observed during a lesson in Swedish as well as in sports. In addition to this on pupil was interviewed. In this paper the results are compared to and measured against results from earlier research in the field. Used as a theoretical basis are Simone de Beauvoir?s theories on gender.The results attained indicate that girls and boys claims space in different ways during time in the classroom as well as in the sports hall.

Large amounts of birch-timber are imported to Sweden, from particularly the Baltic States, since the domestic production can?t support the pulp industry. The goal of this study was to show the potential of birch and the area?s most suitable for birch production. The study was limited to Gävleborg County. Using site characteristics, site index (SI) for birch was estimated on all National Forest Inventory plots in Gävleborg County.

The study sheds light on pupils individual plans of development and portfolios from the perspective of children. It has an ethnographic standpoint. It was carried out on children and pupils in pre-school, pre-school class and third grade. By further investigating how children and pupils use their individual development plans and portfolios, in which settings and to whom they communicate them, this study is able to grasp the discourse that is created around the instrument itself. This study is also interested in and aims to find the theoretical frame, in essence, which envelops both the construction of childhood and children?s own activities within the limitations and opportunities that this structure offers.

This thesis examines Swedish composers' modes of work and production within the Swedish film industry. It starts off with a historical overview treating live music in early silent film, the conversion to sound and the Swedish production climate until present time. The analysis consists of contemporary empirical studies; interviews with people writing music for film, TV and commercials. The musician's perspective is in focus but directors and other film workers are heard as well. The situation for female composers in a male-dominated industry is also discussed.

The present work is a continuation of the ideas developed in previous projects during my Masters studies that explored the relation between pattern, form and space. Starting from the pattern multiplication for space construction the present project proposes textiles as an assortment of flexible expressions. The purpose of the project is to explore aesthetic and functional potential of textiles for out door temporary structures. This is to create a pattern interface which filters sunlight through a textile surface to offer instant sheltering solutions for out door activities. The project combines research and analyses of outdoor temporary structures and scope of textile in the area.

The purpose of this study is to examine whether the high school textbook on religious studies differences in how Christian ethics and in what way it is presented in comparison with the presentation of Buddhism, Hinduism and Judaism and it´s ethics. The analyzed material is textbooks from the late 1960s to the 2010s. Due to the survey´s nature the focus is first and foremost the chapters dealing with religious ethical issues and what amount of pages or space the different religions are given in the books. The results from the textbooks are compared with the curriculum that is or was effective during the time the books were published. This is done to determine whether there is a clear link between the books and the guidelines of the curriculum.

The aim of this master´s thesis is to explore how a library through it´s spatial distribution expresses, and is an expression for, a view of knowledge. This is done by an analysis of the Orkanen library at Malmö Högskola. Questions posed in this study are: What view of knowledge is mediated through the spatial system and in the shelving of books? What view of learning is expressed in the spatial distribution of functions and artefacts?The theoretical framework of this thesis has two fundamental features. One, which focuses on theories of social space, a part that is mainly influenced by the theories of space syntax.

Authenticity and The Public Space, the paradoxical relationship between them. There focus is put on the need to create a new contextualization for my aesthetic practice, and to make be possible incorporating critical views, questioning both the format and the scenic heritage of the west. ! ! ! I do not believe in authenticity in terms of the more individualistic relations of power but in terms of vulnerability, interdependence and mutual care. Also a way to question how capitalism has shaped and created the way of how we understand ?the? art or the value or the way that it is enjoyed..

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.