This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

The purpose of this thesis work is to create a prototype for an augmented reality application that isaimed to support service technician when performing service and maintenance of machines andengines. The prototype will be used for investigating what technical limitations there is and toestablish basic usability for the user interface. The method that is used is user studies and analysis toevaluate use cases and user stories. An iterative work process is then applied for design and theprototype is continuously user tested.The resulting prototype uses a Samsung Galaxy Tab 2 running on Android operating system. Theframework used for augmented reality is NyARToolkit which handles marker recognition andconnections to Android.

The aim of this report is to analyse the logistics of a medium sized restaurant and give an overall solution for improvements on the restaurant's logistics. The restaurant of interest belongs to Laponia Hotel and is located in Arvidsjaur, Sweden. Investments for over 100.000 Euros are planned for the hotel, which includes a reconstruction of the restaurant. The details on how the restaurant will be reconstructed are not yet known. I therefore chose to analyse the problemin general terms and find a solution that is focused on the logistic system itself rather than its layout.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

European cities of today are under the challenge to find ways to stay competitive and flourish in a rapidly changing world, where the old patterns of centrality and periphery not necessarily holds true. New and improved communication networks, a changed political geography in Europe, and the globalisation of not only the financial and industrial markets but also to a certain extent the globalisation of people, have all led to great challenges for cities and regions.In a changed spatial reality the classic monocentric models are challenged by newer models of urbanisation. The polycentric urban region is one such model which has been used to describe urban regions like the Randstad in the Netherlands and the Rhein-Ruhr region in Germany. Regions which lack the single dominant central city of the monocentric models of old, and instead shows a high degree of more equal-sized and sometimes more specialised cities in regional cooperation. The polycentric urban region is in that aspect a possible model for how other urbanised regions in Europe may act to be able to position themselves as attractive urban regions and regional hubs in the European urban network.Polycentric urban regions are not a universal solution, though.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The purpose of this bachelor?s thesis is to examine how public librarians and people engaged in sports associations think of the possibility of collaboration between their organizations regarding children and youth and furthermore how they think this collaboration and collaboration in general would or should be practiced. This is done in the light of the increasing necessity of collaboration in today?s information society as well as the view that reading and sports could make a good match. Focus is placed on the libraries? perspective and also on the respondents? perceptions and thoughts.

The quantity of methane emissions from sheep depend on several factors, for example, the composition of the diet, feed quality, the age of the animals, time of the day and maybe also breed and sex. A comprising literature review was made about which factors that affect the size of emissions. In addition, a questionnaire was sent to two farms, one with a more intensive production system and another with a more extensive system. Inventories of the two farms were made; the rest of the data needed to conduct the study was taken from literature and other sources. Meat produced at the more intensive farm caused emissions of 0.4 kg of methane per kg of bone free meat and the more extensive farm caused emissions of 0.9 kg methane per kg of bone free meat.

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.

The main purpose with this study was to investigate whether the tree growth differs or not in prescribed burnt areas compared to mechanically scarified. Together with the result from the main purpose, answers of whether it's possible or not to combine nature conservation with tree production in prescribed burnt areas was presented. In these areas the regeneration were analyzed to see if there was enough tree plants to comply with the Swedish Forestry Act regulations terms for approved regeneration. A field survey was conducted at 6 objects, three objects for prescribed burning and three for mechanically scarification. All objects were planted within the same year.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.

This paper?s objective is to investigate whether Modigliani and Miller (MM) I & II proposition from 1958 with regard to capital structure, is still valid among public Swedish firms.We have chosen the 63 firms on the Stockholm Stock Exchange (OMX) that Affärsvärlden magazine?s general index (AFGX) has categorized as industrial firms. We based this selection on the assumption that these firms are relatively capital intense and have a clear focus on production and, therefore, mainly uses capital structure as a mean to finance their production and not as a means in itself.To be able to fully evaluate these firms we have calculated the current key ratios based each firm?s annual report. To make the figures comparable across the entire population we adjusted them to each firm?s turnover.The results we have reached concur with MM?s proposition I regarding capital structures independence of the firm value.

The piglet mortality rates have become a major issue in today?s pig production. While other production traits such as number of born piglets or produced piglets per sow have been improved, the mortality rate has escalated. High mortality rates before weaning does not only affect the economy but must also be looked at as both an animal welfare problem and an ethical issue. The background to this problem has been addressed many times, and its salvation has also been addressed by breeding.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.