The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

In this study a multiple linear regression was carried out in the interest of analysing a number of variables effect on the final prices of apartments in Stockholm?s inner districts. The result may be employed to predict and observe percentage changes on the final price of apartments in Stockholm in the future. Five models were constructed after which they were analysed and compared. The construction of these models were supported by data from the real estate agency Erik Olsson.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

Introduction: Analysts worldwide valuates stocks and companies by using different valuation models. The models are used to calculate how much public company?s stocks are worth and to identify whether stocks are over- or undervalued.  Objective: The objective of this essay is to study which valuation models are mainly used by financial analysts in Swedish banks. The purpose is also to study how reliable these models are considered. Method: The empirical study is based on a qualitative approach through interviews with financial analysts. The study includes both primary data (interviews) and secondary data (literature, websites and scientific articles)Theory: The theory chapter includes methods of analysis (fundamental and technical analysis), Valuation models, components of valuation and an example of a valuation with the Discounted cash flow model. Empirical study: The study includes a qualitative research that consists of interviews with financial analysts.

The role distribution between designers and product coordinators and the system support between these roles are adapted according to the method of working that product models primarily are created for production and after sales market. At the same time models are also created to support a cross-functional way of working. This means that product structures exists on paper and as CAD-models before they are created in Scanias PDM-system environment which leads to unnecessary work and to information not being shared as early as it should be possible.A theoretical study has been performed with the purpose of understanding the problems and to create a foundation for improvement suggestions. Representatives from both roles have been interviewed together with other individuals with insight in the collaboration. A minor study concerning the roles of interests? collaboration at Volvo CC was also performed to be able to relate the study to another company.

The problems with train-induced vibrations are increasing with heavier and faster trains. Therefore the work with propagating vibrations is of outmost importance, and that is what this thesis relates to.To get a sensible idea of the propagation, calculation models are often used. Propagation calculation models takes into account factors such as distance to the railway, the ground material and the velocity and weight of the train. This work is mainly about finding suitable existing models and, if necessary, adjust them to be more useful with modern trains and railways.The report contains the work of adjusting one such model and does, despite the fully functional adjusted model, describe how much more there can be done within this topic. Finally, a few tips about specific areas that preferably should be studied to get even further knowledge about the troublesome problems from railways..

The aim and purpose of the following study is twofold. The first part aims at clarifying different models of migration policy available within research of political science. The second part of the study applies the identified models onto an analysis of the official report ?Integrationens svarta bok? and the suggestions the reports presents. The findings of the study are multiple.

Wind is used as an energy source all over the world. To be able to use this effectively, there is a need for as good forecasts and forecast models as possible. One of these models is Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS®) that is used to calculate short time forecasts. This model is used here to calculate wind speeds at two different areas in Västra Götaland, Bengtsfors and Vänersborg. There are also wind measurements with SODAR stations for these areas.

Today, activities funded with public funds needs to present relevant and reliable information which shows the results obtained. Requirements increase in welfare activities to be run based on scientific, empirical knowledge. This applies particularly to social work. The social work is, however, poorly researched in areas such as knowledge of interventions in the content, context and effects. One way to evidence-base social work can be to conduct regular and qualified assessments.

This paper describes a study examining four different GARCH models AR(1)-GARCH(1,1), AR(1)-EGARCH(1,1), AR(1)-APGARCH(1,1) and AR(1)-GJR-GARCH(1,1), and their ability to predict future volatility and thereby providing more reliable estimates for Value-at-Risk. The study is based on daily observations for the return of the OMX Stockholm 30 Index, during the time period 31st December 1996 to 29th December 2006. The coefficients for these GARCH models have been estimated using a five-year rolling estimation window, with one-year lags, for five different in-sample-periods. These five in-sample-periods, and the coefficients given by them, have been used to generate five out-of-sample predictions for the volatility in each year. Using these volatility predictions, the daily Value-at-Risk has been calculated for confidence intervals of 90 percent, 95 percent, and 99 percent, respectively, during the time period between 1st January 2001 and 29th December 2006.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

This essay is an enquiry about how companies as participated in a Lean pro¬duction education use this education. The essay describes also how one works with the implementation of Lean production and how they believe that they will work. The enquiry tries to create an advisory material for other companies that are in the beginning of implementing their own Lean production systems. There these companies? gets a picture of how other companies have done during their try to create a functioning Lean production system.

This thesis studies the way valuation of investment properties is conducted in accordance with IAS 40 and how reliable these valuations are. This has been conducted by studying ten Swedish real estate companies listed on the NASDAQ OMX, during the period 2005-2008. The study shows that all companies use valuation models to determine the fair value of investment properties. Two different types of models have been identified. Companies that use the cash flow model show inconsistencies in time horizon, and how they determine the horizon value.