Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

The aim of the thesis was to investigate energy consumption and carbon dioxide emissions from an advertisement broadcasted on the radio or the television or distributed through press. The object was to calculate the amount of carbon dioxide emissions per individual receiver of an advertisement in Sweden. There was no room for a deeper investigation into editorial work within the framework of the thesis. Consequently, main focus of the radio and television study was on broadcasting itself and the components involved. Focus for the press study was on paper production, printing and distribution. Production and discarding of media equipment was not taken into account.

Farmers? main reason for crossbreeding dairy cows is that they have seen a decline in functional traits, especially in the Holstein breed. Throughout crossbreeding, the farmers can combine functional and production traits of different dairy breeds and utilize the heterosis effects which emerge when two or more breeds are crossed. Results from different studies with Holstein crossed with Jersey, Brown Swiss, Normande and Scandinavian Red have shown that the crosses had higher fertility, longer productive life, had fewer stillborn calves and had easier calvings than purebred Holstein. The Holstein crosses have shown very good results and sometimes even better than the purebred Holstein for fat production, which gave higher amount of energy corrected milk (ECM) and higher income for the farmers.

Nuclear power production carries potential risks both for the environment and for the work force. Different safety measures are employed and they stem from local rules as well as from regulatory authorities. This work describes the development of a safety promoting tool at Forsmark Power Plant, one of Sweden?s three Nuclear power plants. We describe the development of a computer based system for Pre-Job Briefing and Post-Job Debriefing.

In Sweden approximately ten percent of all children grows up in a family where at least one parent is having an alcohol related addiction. Since 1998 the development of group activities for children in this situation has been immense. The aim of group activities is to break the child's isolation and make them feel that they are not lonely in their experiences, give them knowledge about addiction and relive the pressure of guilt and responsibility.In a comparative study we examined studied how two different group activity models one with the conception of illness and one without, use the children's network to support the group process. The aim was also to find each models definition of the "normal family", since we understood the groupactivity as a part in the normalization process. We reached our aim through interviews with group leaders and by literature studies.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

Analogue photography is something that many thought died out in the beginning of the 21?st century as a result of the digital revolution. But that?s not the case. As the digital revolution swept over the world a movement of analogue cameras, and so called toycams grew bigger.

This report examines the possibility of optimizing troubleshooting log files generated when constructing new Volvo trucks. Errors occur when CAD models are stored and managed by the versioning system PDMLink. By developing a new diagnostic tool, Log Search, the troubleshooting process is automated and thereby streamlines the current manual search..

According to FSC (Forest Stewardship Council) shall at least a mean of 10 trees per hectare including riparian zones and other areas with high biological values be left in final felling. In addition large clear areas should not be created and all retained trees with high environmental value shall be spared. To leave trees in final felling means a lower cutting volume and hence a lower income from the cutting, but it also means that the production in the next generation becomes less because of competition. The aim of this study was to evaluate the effect retained trees have on the production in the new generation of forest, and to investigate if there is any way to lower this effect. The environmental care has also been estimated by the amount left in final felling.