The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

För att ett företag ska kunna hålla sig flytande på marknaden idag krävs de att de har hundra procent koll på vad som sker i deras fabriker och att de strävar efter en mer hållbar tillverkningsprocess. Att försäkra konsumenterna om att fabrikerna inte använder sig av barnarbete eller dåliga arbetsförhållanden räcker inte längre utan det krävs en bredare kunskap inom miljö och hållbar utveckling för att den trogna kunden ska stanna. Syftet med denna rapport är att kontrollera det nyuppstartade företaget DENIM IS DEAD?s produktion och utvärdera om hur man kan förädla de olika processtegen samt skapa transparens gentemot kund.Metoden som arbetet utformades efter var genom en fallstudie som är baserad på en mestadels deduktiv metod men med inslag av induktiv metod. Där grunden lades genom en utförlig faktainsamling för att i rapportens senare del kunna analysera de hypoteser och problemformuleringar som ställts.Målet med rapporten var att ta fram en metod eller produkt som ska underlätta kommunikationen med DENIM IS DEAD?s kund.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

By applying a segmentation procedure to two different sets of computed tomography scans, two geometrical models of the abdominal aorta, containing one inlet and two outlets have been constructed. One of these depicts a healthy blood vessel while the other displays one afflicted with a Abdominal Aortic Aneurysm. After inputting these geometries into the computational dynamics software FLUENT, six simulations of laminar, stationary flow of a fluid that was assumed to be Newtonian were performed. The mass flow rate across the model outlet boundaries was varied for the different simulations to produce a basis for a parameter analysis study. The segmentation data was also used as input data to a surface description procedure which produced not only the surface itself, but also the first and second directional derivatives in every one of its defining spatial data points.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

The quantity of methane emissions from sheep depend on several factors, for example, the composition of the diet, feed quality, the age of the animals, time of the day and maybe also breed and sex. A comprising literature review was made about which factors that affect the size of emissions. In addition, a questionnaire was sent to two farms, one with a more intensive production system and another with a more extensive system. Inventories of the two farms were made; the rest of the data needed to conduct the study was taken from literature and other sources. Meat produced at the more intensive farm caused emissions of 0.4 kg of methane per kg of bone free meat and the more extensive farm caused emissions of 0.9 kg methane per kg of bone free meat.

Mulesing is a surgical husbandry procedure performed on lambs in Australia. The reason is toprevent severe fly-strike to the breech area, which otherwise risks to be soiled with faeces.This problem is mainly occurring in sheep of the Merino breed. Their fine wool is in demandworldwide due to high quality. Mulesing has been performed since the 1930?s, and eventhough alternative methods have been discussed nothing is yet generally accepted.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

The main purpose with this study was to investigate whether the tree growth differs or not in prescribed burnt areas compared to mechanically scarified. Together with the result from the main purpose, answers of whether it's possible or not to combine nature conservation with tree production in prescribed burnt areas was presented. In these areas the regeneration were analyzed to see if there was enough tree plants to comply with the Swedish Forestry Act regulations terms for approved regeneration. A field survey was conducted at 6 objects, three objects for prescribed burning and three for mechanically scarification. All objects were planted within the same year.

During the 17th century the production and distribution of printed works increased in Stockholm and Uppsala. However, all works that the publisher wanted to print, did not reach the reader. This thesis aimed to show when, where and how printed books and dissertations did not reach the reader. To achieve this aim, aspects of several well known models showing systems of book production and distribution were combined and adapted to suit Swedish conditions in the 17th century. This combined model focused on processes of selection and was presented and used as a theoretical approach.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

This paper?s objective is to investigate whether Modigliani and Miller (MM) I & II proposition from 1958 with regard to capital structure, is still valid among public Swedish firms.We have chosen the 63 firms on the Stockholm Stock Exchange (OMX) that Affärsvärlden magazine?s general index (AFGX) has categorized as industrial firms. We based this selection on the assumption that these firms are relatively capital intense and have a clear focus on production and, therefore, mainly uses capital structure as a mean to finance their production and not as a means in itself.To be able to fully evaluate these firms we have calculated the current key ratios based each firm?s annual report. To make the figures comparable across the entire population we adjusted them to each firm?s turnover.The results we have reached concur with MM?s proposition I regarding capital structures independence of the firm value.

The piglet mortality rates have become a major issue in today?s pig production. While other production traits such as number of born piglets or produced piglets per sow have been improved, the mortality rate has escalated. High mortality rates before weaning does not only affect the economy but must also be looked at as both an animal welfare problem and an ethical issue. The background to this problem has been addressed many times, and its salvation has also been addressed by breeding.