Between 1965 and 1974, the Swedish Parliament decided to build one million dwellings, called Million Program. The million program buildings were erected with new, untried design solutions, in a short range of time, and at low cost. The residential buildings from that time are now greatly in need of renovation. The municipal housing company, Gavlega?rdarna, renovates and improves the energy efficiency at some of it?s apartment buildings in the district Sa?tra, Ga?vle.

This document presents calculations of adjusted GDP based on satellite household accounts for the year 2001 with the purpose to compare adjusted and official GDP for Sweden, Germany, Estonia and Finland. Household production in each country is estimated using time use survey data from Eurostat and a monetary value is estimated using average wage (after taxes) for each country. The results indicate that the value of household production using this methodology increases GDP with between 42% (Finland) and 55% (Germany) compared to official GDP statistics. A comparison of GDP/capita between the countries included in the study shows that the GDP/capita in Germany increases more that the other countries due to the relatively high proportion of time used for household production (mainly German women) combined with a high average wage. In fact, the results show that Germany has higher adjusted GDP/capita than both Finland and Sweden (but Germany has lower GDP per capita when official statistics is used for the comparison).

The aim of this literature study was to analyze how milk urea concentration is working as a measure of the nitrogen supply to rumen microbes and indicator of the environmental load. Questions included in this literature study were how to improve the dairy cattle nitrogen efficiency and what correlations there are between milk urea, nitrogen efficiency and crude protein content in the feed. Effects on the reproduction from high ration protein content are also addressed. Dairy cattle are today fed with large proportions of protein which could lead to high expenditure of feed and environmental pollutions. The nitrogen can be lost to the environment by different pathways; leaching, denitrification or by emission to the air.

The aim of this literature study was to analyze how milk urea concentration is working as a measure of the nitrogen supply to rumen microbes and indicator of the environmental load. Questions included in this literature study were how to improve the dairy cattle nitrogen efficiency and what correlations there are between milk urea, nitrogen efficiency and crude protein content in the feed. Effects on the reproduction from high ration protein content are also addressed. Dairy cattle are today fed with large proportions of protein which could lead to high expenditure of feed and environmental pollutions. The nitrogen can be lost to the environment by different pathways; leaching, denitrification or by emission to the air.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

The aim of this essay is to analyze how food and meals produce and reproduce values and power relations and how these processes are portrayed in Virginia Woolf?s To the Lighthouse. Using sociological writings in the field of food consumption and production I study the structures that affect our relation to food and eating. This perspective is combined with a phenomenological view, aiming to examine how food is perceived, which is also inspired by queer theories. Using the method of close reading, the theories are applied to Woolf?s work.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

In Sweden whenever trains or maintenance workers want access to the railway system, their requests of usage and movements are being supervised, granted and handled by train dispatchers. The profession holds a key role in making the complex railway system work in terms of efficiency, safety and delivering on-time arrivals. This master thesis, delegated by the Swedish Transport Administration, has been carried out at the Division of Human Computer Interaction at Uppsala University and at the train traffic control center in Gävle. The aim has been to map what information the train dispatchers use in order to make safety-related decisions concerning their working goals. And further to describe and analyze how the train dispatchers, visavi their tools and systems in the work domain, gather necessary information.The result indicates a complex, diverse and spread out setting of different programs, procedures and tools that make satisfactory fulfilment of efficiency, safety and punctuality in relation to the time table hard.

Vilken strategi ett tillverkande företag arbetar efter kan variera och bero på en mängd olika faktorer. En effektiv tillverkning kan bli komplicerad när marknaden efterfrågar allt mer skräddarsydda produkter med varierande egenskaper. För att bemöta denna typ av komplexitet finns en rad strategier och modeller som har fått global spridning. En av dessa strategier är lean production, ett begrepp som vuxit fram utifrån studier genomförda på den japanska tillverkningsindustrin.I denna studie undersöktes varför lean production valdes som styrningsfilosofi i ett svenskt tillverkande företag, vilka förändringar detta inneburit samt vilka åsikter som fanns kring förändringsarbetet. Insamling av empiri har skett genom att genomföra en fallstudie på företaget Trioplast Sifab.

During the autumn 2009, a 15 hp degree project was accomplished. The objective of the study was to describe different equipment alternatives, suitable for fresh market apple harvest. A field study was conducted during the harvest period to evaluate the efficiency (kg / person/ hour), using the different equipment. Four different systems are described in the study; Pick-ing-bag, Picking-train, Pluk-O-Trak and the Conveyor Harvester. The information about the systems is based on interviews with growers together with previous studies.

The purpose of this master thesis is to investigate how nearby forests affect the energy production in wind turbines. To reach the purpose a case study is performed on three wind turbines sited on a field in a north-south line at Andersfält in the municipality of Halmstad, Sweden. Approximately 100 meters south of the southern wind turbine a forest is situated. The case study is divided into three sub studies where the difference in energy production, the affect of the forest and a wind meteorology model, WAsP, is studied. The result show that the forest have a significant influence and that the WAsP-model gives an incorrect result of the energy production in wind turbines sited near a forest..

This thesis evaluates the environmental performance of six different fish farming systems. The thesis is part of the network group ?Hållbar fiskförsörjning I Stockholms län? (HFFS) which tries to increase the domestic and regional production of fish in Stockholm and move to a more sustainable supply in the Stockholm county. Two of the chosen systems; pangasius from Vietnam and salmon from Norway are delivering a substantial part of the fish consumed in Stockholm today, although they are very different when it comes to system characteristics. One system, arctic char with conventional feed, is produced in a fairly small scale in the north of Sweden, while the three remaining systems are viewed upon as possible options to supply Stockholm with fish in the future.

Feedback tools support electricity users within the Swedish residential sector to increase their knowledge of electricity and the electricity market as well as to become more aware of their electricity consumption, which in turn encourages a reduction and an increased flexibility of electricity use. The primary aim of this study is to identify and analyse how existing feedback tools can be improved, to ensure that they contribute efficiently to the achievement of the EU objectives congruent with a more sustainable energy system in 2030, emphasizing: greenhouse gas reduction, increased energy efficiency and an increased share of renewable energy. In order to reach the primary aim of this study, existing feedback tools have been identified and mapped and interviews with feedback tools providers have been conducted. The study is limited to three research areas: the practical functions of feedback tools, available technology and the use of feedback tools.The use of more efficient feedback tools will provide an increased success rate for energy management, which includes both behavioural changes and energy efficiency. According to the results from the interviews conducted for this study, an increased use and user frequency is important to utilise the energy management potential.