For a long time the Swedish forests were used by the landowner?s mainly for providing wood to the household itself. The wood was not, to a greater extent, considered a product to be sold. During the 1800s the industrial era led to a demanding need for wood in the industry and thus the use of forest, forest production kicked off. The forest production was not regulated by law, which led to a differentiated forest production over the whole country without consideration of re-growth.

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.

Cattle production systems are changing to bigger intensified systems with larger numbers of animals per farm and more free range systems while at the same time employing fewer people. Aversive handling has been known to affect cattle production negatively for many years, but lately scientists have started to focus more on what positive effects gentle handling and positive human-cattle interactions may have on beef and dairy production. Fear can cause high stress in production animals and this can contribute to not only reduced production within beef and dairy cattle, but also increased risks for accidents and decreased animal welfare. Therefore, by reducing the fear cattle experience of humans, it could be possible to increase production, decrease accidents and increase the welfare of the animals. Reducing the animals fear and stress can be done by simple means, such as walking and talking calmly around the cattle, associating humans to positive feelings (such as feed) and stroking the cattle?s body regions associated with social grooming.

The purpose of this essay is to evaluate how the big changes in prices are effecting pigproduction. My calculations show how much there will be left for interests and amortisation. I?ve chosen not to calculate the costs of buildings. The condition from the beginning is a production of pork with 10.000 pigs per year. Instead of buying piglets, I?ve calculated on breeding them and for that purpose I will need 440 sows. I?ve investigated the working hours and given examples of how to decries these. My conclusion is that with the prices we have to day, pork production is a hard business..

Denna uppsats undersöker hur ledarstilen påverkas av anammandet av filosofin inom Lean Production. Syftet är att granska hur ledarna kan kombinera dynamiken bakom ett pedagogiskt ledarskap och medarbetarnas medinflytande med principerna inom Lean Production. Vår uppsats bygger på den empiri vi samlat in genom sex kvalitativa intervjuer med både ledare och medarbetare på tre avdelningar inom tre olika organisationer. De teoretiska utgångspunkter vi använt oss av grundar sig i huvudsak på Arne Malténs dimensioner kring ett pedagogiskt ledarskap. Analysen är sedan strukturerad kring dessa dimensioner.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

Angelica archangelica (Garden angelica) is the only Medicinal and Aromatic Plant (MAP) with a Nordic origin. The plant can reach up to three meters when cultivated. Angelica archangelica is used as flavouring in additives, honey, beverage base, essential oils, fol-klore medicine and as ornamental for decorative purposes. Commercial cultivation is mainly focused on root production. Production countries are Poland, Netherland, France, Belgium, Switzerland, and former Czechoslovakia with an overall yearly world production of 1000 kg of essential oils.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.