The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

The relatively poor economy in European dairy farming might be improved from efficient feeding systems and dietary management. Increasing herd sizes and transition to loose housing systems in Sweden, increases the possibilities for other feeding systems than separate feeding that is the traditional feeding system in Sweden. Other possible feeding systems are partial mixed ration (PMR) and total mixed ration (TMR), where the TMR system sometimes is associated with overfeeding and thereby increased environmental impact and high feed cost. Diets providing nutrients above or below animal requirements are considered as unbalanced, which in turn are associated with reductions in health, fertility and milk production. On the other hand, a balanced feed ration improves feed efficiency, nitrogen utilization and profitability.

The aim of this study is to review the commercial quail production for eggs and meat in the world. Another aim is to review the potential for increased production. Globally the quail production is very small, except in China where it is the second largest poultry industry. The production globally is small despite the quail's rapid growth, early sexual maturity and its high feed efficiency. The quail is also used as a laboratory animal and can be reared to be released in hunting areas.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

This report is about logistic efficiency in companies without own production. The authors have interviewed employees working at two companies, Telias store in Skärholmen and Orion Diagnostica AB. The purpose of the report is to find out which logistic functions the two companies are using to create efficiency.Today?s markets are more global. Different parts of a product can be made in different parts of the world.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The economic prerequisite to many farmers in Sweden after the EU membership and the new agriculture policy has generated large demands on the farm management. Until year 2004 you got a grant based on what you had produced and not on consumer demand. In 2005 a new economic aid (Mid Term Revue) was introduced and the conditions has changed again. Due to this I have chosen to do a cost-benefit analysis on a case, to investigate if the present production is sustainable in the future. My conclusion is that the profitability is acceptable even if the farm has a high debt. But to make the production more profitable the products produced should be refined as much as possible at the farm, to get maximum economic return.

The current demanding business environment requires corporations to act fast in finding effective solutions to problems given the myriad of challenges they face (Dyllick & Hockerts, 2001). The challenges include the impact of climate change on business practices, natural resource consumption, chemical pollution, technological change etc. Moreover, the forces of globalization, heightened concerns about the deteriorating quality of the physical environment and increased stakeholder power are also increasingly having a real influence on business practices (Rainey, 2008). Since 1992, the World Business Council for Sustainable Development (WBCSD) has encouraged the adoption of the concept of ecological efficiency (eco-efficiency) to support business efforts aimed at addressing some of these challenges. The aim of eco-efficiency is to reduce the amount of energy and materials used in production processes to achieve economic and environmental benefits (WBCSD, 2000).

To meet the needs and demands of the costumer, accurate information about how much is available in stock is necessary. When the information in the system does not match the physical inventory, inventory inaccuracy occurs. Inventory inaccuracy is common among companies and may contribute to increased labor cost, excess inventory, production disruptions, waste of time, late deliveries, poor service and lost customers.The purpose of this study is to identify contributing factors to inventory inaccuracy for business with outdoor storage. The study also aims to investigate how efficiency factors can reduce the inventory inaccuracy for business with outdoor storage.A case study was conducted to answer the purpose. A company in the steel industry was chosen to examine inventory inaccuracy on business with outdoor storage.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

This thesis examines the relationship between OECD-DAC and Civil Society Organizations (CSOs) within an aid efficiency context. The ability for these two actors to cooperate is highly important and determines the outcome for a major part of the development aid in the new millennium. The development agenda for the new millennium emphasizes aid efficiency as a key to a more successful aid, and this requires increased cooperation between all actors. The analysis made is a discourse analysis. The discourse of aid efficiency is analyzed, both its preconditions and results.The analyze finds out that there is a gap between OECD-DAC and CSOs in terms of how to handle aid efficiency.