The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

The aim of our master thesis is first and foremost to win the competition One Prize - mowing to Growing: Reinventing the American Lawn, announced in USA by the organization Terreform 1, the first of December 2009. Apart from winning the competition we have also tried to reach a deeper understanding of food production today and its future possibilities. Our ambition to present a winning design proposal has to a large extent decided the structure of the entire thesis. Our completed and submitted design proposal - growforgold.org - is a way of addressing urban food production in a creative way, keeping the sovereignty of the individual in mind. Instead of presenting a place-specific design solution our proposal aims to create incentives and possibilities for urban farming to take place anywhere and anytime. Our submission to the competition represents both a tool and a platform which, put in practice, could make landscape architecture happen through the hands of the individual.

The soybean can be used in multiple ways, and its high oil content makes it suitable for extraction. Soy bean meal, a by-product of the oil extraction, is a good source of protein with a high feeding value, and is therefore used in a number of different animal feeds. Further, soy bean meal has a low production price, which is one of the reasons for the extensive export of the product. There is a great demand for vegetable-based proteins, especially in the organic production where synthetic amino acids are banned. However, the current production of soy beans is not environmentally sound and that combined with the long transport distances amplifies the need of finding a locally produced protein source.

Livestock of pastoralists provide meat, milk, blood, dung and are useful for transportation purposes. In semi-arid and arid areas with very low precipitation the herder must often walk far distances to feed the livestock. This affects the animals? production, especially of milk. Previous studies have investigated how to improve milk production in terms of milking strategies in cattle.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

The present study examines in a longitudinal perspective earlyspeech development in children with partial isolated cleft palate comparedwith children with unilateral cleft lip and palate and children with typicaldevelopment. The groups were compared regarding consonant production at18 months, 3 and 5 years. The results showed that speech development inchildren with isolated cleft palate did not differ significantly from that inchildren with typical development except for production of oral fricatives at18 months. The children with unilateral cleft lip and palate had significantlymore speech deviations at all ages. The children in both cleft palate groupshad significantly higher hearing thresholds at all ages.

This diploma work covers an investigation over the heat - and hot water systems of thetenant-owner's association, Bogården. The heat - and hot water needs of Bogården aresatisfied by both district heating as well as three heat pumps. Implemented investigationshows that the heat pumps are not used in a profitable way. Apart from that, the reservepossibilities are small. There is also a risk of the growth of Legionella bacterium in thehot water system.Since the heat pumps are already installed, HSB-Gävleborg (responsible for Bogården)has a wish to investigate possible proposed actions for optimization of existing plant.After completed investigation, a new proposed action is presented.

A totally mixed ration (TMR) is a mixture of all the necessary feed components for the cow. She will eat the exact same feed in every bite which will make the rumen pH more stable and always supply her with a constant proportion between roughage and concentrate. This will make it possible for the cow to eat more dry matter (DM) a day because the fibre requirements are fulfilled. If a part of the concentrate is given separated from the mixture it is called partly mixed rations (PMR) and is almost always used when using an automatic milking system (AMS). When using TMR and PMR it is important to have a high hygiene, be accurate when mixing the feed and to look after cows in a good and strict way. The aim of this study was to document different farms with PMR in an AMS to see which routines they have and how they are managing their production.

Our project is divided into two parts, one production and written report. The main focus was the production part, were we used PHP to create simple solution for handling SMS and MMS with direct communication with the mobile operator server. We communicate with sockets and can handle CIMD2 and MM7 protocol. To get our components easy to use we have created two classes to handle SMS and MMS. To demonstrate our technical platform we created a website were you can create an account.

This study examines how farmers certified by KRAV face proposed regulations on organic soils put forward by KRAV economic association among others, and how they are affected economically. These soils are, from an environmental perspective, interesting as a target for production regulations as they cause greenhouse gas emissions through decomposition of organic material when cultivated. The regulations advocate that organic soils should be grown with pasture where soil cultivation is only allowed every fith year which implies that possible adjustments of cultivation have to be made in order to fulfill the regualtions. Collection of data have been made through a questionnaire sent out to 574 farmers certified by KRAV. The answers have been analysed using a decision making model and statistical findings suggest that proportion of organic soils, type of production, economic conditions and farmers? goals and values have an influence on whether the regulations and potential cultivation adjustments have been considered or not.

In Sweden there are 354 000 private individuals owning forest. Of these forest owners there are at least two thirds that are self-employed, which means that about 215 000 forest owners conduct some kind of work in their own forest. Those numbers do not refer to firewood production, but every year 7.3 million piled cubic meters of firewood are used for heating Swedish households. This implies that many households are also producing firewood. The objective of this study was to assess and analyse the small-scale firewood production in the Umeå-region in terms of persons engaged in the work, equipment used, produced volumes and share of forest-owning households involved in these activities. According to results from a questionnaire, the average firewood producing person is a man between 40-60 years old.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.