Sök:

Sökresultat:

2832 Uppsatser om Production drawing - Sida 14 av 189

Franz Liszt och Julius Reubke : en studie av två viktiga orgeltonsättare, Franz Liszt och hans elev Julius Reubke, deras liv, verk och konstnärliga miljö i Tyskland vid mitten av 1800-talet

This work has treated the subject of gender, with demarcation against the norms regarding appearance and beauty, conveyed by the media and how it affects society. This is expressed through social satire cartoons. This work has also led to an exploration of the importance of a personal drawing style and how it manifests itself..

BNP och hushållsproduktion : En jämförande fallstudie av Sverige, Tyskland, Estland och Finland baserad på satelliträkenskaper för hushållsproduktion

This document presents calculations of adjusted GDP based on satellite household accounts for the year 2001 with the purpose to compare adjusted and official GDP for Sweden, Germany, Estonia and Finland. Household production in each country is estimated using time use survey data from Eurostat and a monetary value is estimated using average wage (after taxes) for each country. The results indicate that the value of household production using this methodology increases GDP with between 42% (Finland) and 55% (Germany) compared to official GDP statistics. A comparison of GDP/capita between the countries included in the study shows that the GDP/capita in Germany increases more that the other countries due to the relatively high proportion of time used for household production (mainly German women) combined with a high average wage. In fact, the results show that Germany has higher adjusted GDP/capita than both Finland and Sweden (but Germany has lower GDP per capita when official statistics is used for the comparison).

Tidsupplösning vid miljövärdering av fjärrvärme : Kontorsbyggnad med solvärmeproduktion - en fallstudie

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

En exakt konst: : (Re)produktion och gestaltning av makt och normalitet genom mat och måltider i Virginia Woolfs Mot fyren

The aim of this essay is to analyze how food and meals produce and reproduce values and power relations and how these processes are portrayed in Virginia Woolf?s To the Lighthouse. Using sociological writings in the field of food consumption and production I study the structures that affect our relation to food and eating. This perspective is combined with a phenomenological view, aiming to examine how food is perceived, which is also inspired by queer theories. Using the method of close reading, the theories are applied to Woolf?s work.

Lönsam produktion av stärkelsepotatis : timing och skördeanpassade åtgärder

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

Simuleringsmodell över Ålö AB

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

Förändringsarbete mot en resurssnål tillverkning : Lean production i ett svenskt tillverkande företag

Vilken strategi ett tillverkande företag arbetar efter kan variera och bero på en mängd olika faktorer. En effektiv tillverkning kan bli komplicerad när marknaden efterfrågar allt mer skräddarsydda produkter med varierande egenskaper. För att bemöta denna typ av komplexitet finns en rad strategier och modeller som har fått global spridning. En av dessa strategier är lean production, ett begrepp som vuxit fram utifrån studier genomförda på den japanska tillverkningsindustrin.I denna studie undersöktes varför lean production valdes som styrningsfilosofi i ett svenskt tillverkande företag, vilka förändringar detta inneburit samt vilka åsikter som fanns kring förändringsarbetet. Insamling av empiri har skett genom att genomföra en fallstudie på företaget Trioplast Sifab.

Skogs påverkan på vindkraftsproduktion - en fallstudie av vindkraftverk vid Andersfält.

The purpose of this master thesis is to investigate how nearby forests affect the energy production in wind turbines. To reach the purpose a case study is performed on three wind turbines sited on a field in a north-south line at Andersfält in the municipality of Halmstad, Sweden. Approximately 100 meters south of the southern wind turbine a forest is situated. The case study is divided into three sub studies where the difference in energy production, the affect of the forest and a wind meteorology model, WAsP, is studied. The result show that the forest have a significant influence and that the WAsP-model gives an incorrect result of the energy production in wind turbines sited near a forest..

Livscykelanalys av sex olika fiskodlingssystem : Fiskens miljöpåverkan för konsumtion i Stockholm

This thesis evaluates the environmental performance of six different fish farming systems. The thesis is part of the network group ?Hållbar fiskförsörjning I Stockholms län? (HFFS) which tries to increase the domestic and regional production of fish in Stockholm and move to a more sustainable supply in the Stockholm county. Two of the chosen systems; pangasius from Vietnam and salmon from Norway are delivering a substantial part of the fish consumed in Stockholm today, although they are very different when it comes to system characteristics. One system, arctic char with conventional feed, is produced in a fairly small scale in the north of Sweden, while the three remaining systems are viewed upon as possible options to supply Stockholm with fish in the future.

Riskfaktorer för uppkomst av neurologisk sjukdom vid infektion med EHV-1

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

Hur kan vi utveckla vårt personliga uttryckssätt med ljud?

This is a bachelor thesis that studies and discuss the question: How can we develop our individual narrative technique with sound design in a Swedish drama production? We have done research and empirical studies. We have analyzed movies to get an idea how we use the sound design in Swedish drama productions today. We have produced a movie that gives sound the biggest part. Key words: Swedish drama production, narrative technique, sound design.

Ledtidsreduktion i en kundorderstyrd produktion

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Energianvändning på Volvo Lastvagnar Tuve

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).

Med Lean i bagaget - En studie om Leans förmåga att öka produktiviteten av en bagagehanteringsprocess

Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service productivity; since service productivity consists of both efficiency and quality. Research regarding productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.

Vem styr mitt arbete? Förändrade arbetsuppgifter vid datorisering av körschema

Abstract This report is our bachelor thesis. Our work has taken place at a galvanising company in Sölvesborg. The company faced major changes, of which one was a computerisation process. The new system could involve changes in work practice and in specific tasks, affecting the workers. If the coming system was to support work, from the production personnel?s perspective, we felt a legitimate participation in the development and design of the future work practice, was a requirement that was not met.

<- Föregående sida 14 Nästa sida ->