Problem: How do delivery logistics work in practice at the building site? Where are the big problems? How to make building logistics more effective? Do the site management and the haulers agree about questions concerning both parties? What is possible to gain by using better logistics? Is it possible to gain time with better logistics and by that reducing the costs? Purpose and aim: The purpose is to discover if there are any disagreements between the site management and the haulers. If disagreements occur they will be examined and probable measures based on the problems will be suggested. Another intention is to bring key ratios concerning time spent for deliveries forward. One aim is to update a similar report made in 1972.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

Domestication has resulted in the ability for animals to adapt to environments created by the human over time. The behavior differs very little between wild and domesticated animals, but the difference seen is how often and to what degree a behavior is performed. The need for efficiency in modern animal production has led to welfare problems in the productionsystems where the animals have difficulties coping with their environment. Attempts to environmentally adapt individuals by selection for reduced frequency of natural behaviours have been made. These have shown that natural behaviours are complex and are controlled by several different mechanisms, making selection for reduced natural behavior difficult, and it may also lead to unwanted and abnormal behaviours.

The purpose with this thesis is to analyse different factors that can explain district heating prices for energy companies in Sweden. We are further interested in examining if the prices is affected by the use of industrial waste heat in their production and the company?s ownership structure. The method applied is a multiple regression analysis using a panel data set of 50 companies over 5 years (2008-2012). The data used is yearly data obtained from the Swedish district heating association.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

The aim of this thesis is to create an understanding of the incentives for forest companies to invest in reducing carbon dioxide emissions from deforestation and forest degradation, which is termed REDD. The Brazilian Amazonas was chosen as the base for the investment case. Brazil has the largest area of rainforest in the world, and also the biggest problem with deforestation. The Amazon region of Brazil comprises rainforest which is largely intact and unexploited. Accordingly, there is significant potential scope for prospective investments in a REDD-project, and so have a noteworthy impact in preventing deforestation.The research approach used the United Nation?s Clean Development Mechanism concept was used as a framework for ascertaining the investment costs in potential REDD-projects.

In time with HolmenSkog district Egenskog Norrköping´s decreasing mountain of cleaning, the office started to look around for new alternative cleaning strategies to lower the costs connected with cleaning. One option was to make the inventory strategy more effective and after a phonecall with the head of the district, Jonnie Friberg, the planning started to try inventory in pictures taken from a helicopter. The pictures was at last taken from a digtal camera and the vegetationheight was mesured with a laser. The gear was supplied from Kallax Flyg AB, Luleå. In the trial 15 stands was selected depended on age and different mixtures between pine (Pinus sylvestris), spruce (Picea abies) and birch (Betula pubescense and Betula pendula).

Platelets are important for the healing of damaged blood vessels since they have an importantpart to play in the coagulation process. At the same time, the blood must be kept fluid and notcoagulate at the wrong time. Therefore there are factors that effect the aggregation of plateletsin a positive or a negative way.Previous investigations have shown that platelets during stirring conditions produce reactiveoxygen species (ROS) that weaken the inhibiting effect of nitric oxides (NO) on platelets andthat the drug Dexamethasone (Dex) can reduce the ROS-production.The aim of this project was to investigate if glucocorticoids, in this case Dexamethasone,could restore the inhibiting effect of NO on platelets and if there was any decrease in ROS-production.The result of the ROS-measurements showed a great variance and it was difficult to draw anyconclusions from them, but a clear decrease in ROS, as previous reported, was not shown. In the aggregation experiments the inhibiting effect of NO was observed through the drug S-nitroso-N-acetylpenicillamine (SNAP), a NO-donator.From the aggregation experiments, the result seemed to be that SNAP during longerincubation time lost its inhibiting effect, probably because the cells become desensitized.With superoxid dismutase (SOD), the effect of SNAP increased, both in the experiment withlonger and shorter incubation times. Dex seemed to reinforce the aggregation in relation toboth SOD and SNAP.

The Swedish carrot market is dominated by a few big companies and three of them stands for 50 % of the market. During the last twenty years the number of growers has decreased, the area and the harvest have increased. The big producers have invested in advanced and expensive postharvest equipment that fulfils the high standards of the food industry. Few carrot producers are members of an organisation and they keep contacts with there buyers one by one. The buyers are mostly wholesalers and these have during a long period of time decreased the number of suppliers.