Sök:

Sökresultat:

3551 Uppsatser om Production costs - Sida 37 av 237

Kvalitetssäkring av Clas Ohlson AB´s grafiska produktionsflöde

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

Methane production from dairy cows : relations between enteric production and production from faeces and urine

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.

Försörjningsstöd och lokalsamhälle : En explorativ studie om låga försörjningsstödskostnader i Säffle kommun

The purpose of this study is to illustrate if structural factors to welfare indicators and the internal organisation of handle social assistance in combination with dominating ways of living with their values and norms can be used to explain why the costs of social assistance are low in Säffle township. The character of this study is exploratory, though important aspects in this case was unknown. The empiricism come from descriptive secondary statistics and from qualitative interwievs with three inhabitants in Säffle, whom are experts which means they know the township of Säffle and it´s inhabitants well. Säffle has been studied from four perspectives, of which the first two have a top- or macroperspective. In the study appears two divergent pictures.

Förändrad markanvändning vid biodrivmedelsproduktion : en empirisk undersökning av svenskproducerade biodrivmedels påverkan på åkermarkens användning

Increasing the use of biofuels is an important part of achieving the EU?s target of 10 percent renewable energy in the transport sector. However, the competition between biofuels and food production is an ongoing concern. Also, several studies have indicated a significantly higher climate impact than was earlier estimated, due to emissions from land use. In Sweden, both the use and production of biofuels from crops have increased substantially during the last decade. The purpose of this project is first to present an overview of the Swedish land use in all sectors.

Produktivitetsförbättringar : - förhöjning av produktiviteten vid mekanisk verkstad genom förkortade transportsträckor och standardiserad bearbetning

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Ley management : a means to improve forage quality and production

Higher demands of competitiveness and efficiency have led to increasing sizes of farms, with more land, more capital and more comprehensive logistics. The aim is to gain benefits of scale economies that reduce the production cost per unit. However, a greater extent of the business exposes the farm of increased risk where small deviations rapidly can erase the benefits. A modern dairy farm thus put high demands on the farmer?s ability to coordinate, plan and manage the forage production through the whole process until storage to obtain silage of the desired quality and quantity at the right price. The objective of this study was to design a simple model, i.e.

Hälsoproblem hos strutsfåglar i Sverige : litteraturstudie och sammanställning av patologifynd

In the beginning of the 1990?s ratite breeding for meat production was introduced in many European countries, including Sweden. The knowledge of ostrich farming and diseases of ratites is increasing internationally but is still often limited among veterinarians. This report consists of a literature study and a summary of pathology findings from ratites submitted for necropsy to the National Veterinary Institute (SVA) in Uppsala, during 1995 to 2001. The purpose is to give a general introduction to ostrich and ratite breeding and to give an overview of the most common diseases. The necropsy data from 1995 to 2001, indicate that many of the diseases are management related rather than caused by infectious agents. Due to cold climate ostrich breeders in Sweden need to supply well designed buildings and good care of the animal.

New Business Model for District Heating Firms Stabilizing the National Energy System with a Future Variable Electricity Production

The aim of this thesis is to develop a new business model for district heating and cooling firms which can contribute to a stabilization of the Swedish national energy system. The business model is developed for a district heating and cooling firm and is exemplified with Fortum Heat. The theoretical investigation around the topic creates a rigid base for following qualitative empirical studies. Osterwalder?s canvas for business model generation is used together with a Casual Loop Diagram to identify a number of business opportunities which stabilizes the national energy system.

Scenarioanalys över Sveriges elproduktion år 2050 : Kan Sverige försörja sig med 100 % förnybar

The aim of this report was to investigate if Sweden can have 100 % renewable electricity production in the year 2050. The conclusion is that it is possible but under certain conditions. For instance wave power must be in commercial use. When wind power and solar power represent a large percentage of the electric production there will be a lack of electric power during the winter but during the summer there will be a surplus of electric power. Both the surplus and the lack of electric power need to be taken into account.

Åkerinäringens inställning till biodiesel : en marknadsundersökning

In Sweden, there an increasing need for transport and this leads directly to fuel demand of the transport sector is expected to increase. Both politicians and industry believes that renewable fuels are a realistic and significant method to reduce the transport sector's environmental impact. This study aims to document the Swedish haulage contractor?s attitude to biodiesel. Also to document the strengths and weaknesses of biodiesel, based on opinions from the ultimate consumers.

BIM i produktionsskedet

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

EFFEKTIVISERING AV INTERN MATERIALHANTERING

Considering that the current technology is constantly improving, it becomes increasingly important to have an efficient logistics in a company to maintain profitability while achieving a competitive business. Efficient logistics may be accomplished by improving the internal materials handling. In this thesis the internal material handling of steel frames has been studied at a factory in Vaggeryd. The goal of this study is to investigate the problems that exist with the current production flow of products and provide suggestions on how it can be developed to reduce unnecessary handling and movement.The study has a deductive approach where the authors has been using literature studies parallel with empirical analyzes conducted at a company to achieve the purpose of the study. Documentation from the company and interviews with staff and observations form the basis for the data collection carried out.

Vad skulle få en lantbrukare att ställa om från konventionell till ekologisk mjölkproduktion? :

The Swedish government has proposed that 20 % of the cultivated land in Sweden should be organic by the year 2010 (The Swedish Board of Agriculture, 2008). In addition to this the production of organic food like milk, meat and egg should increase considerably. To reach the government?s goal it is necessary that the Swedish farmers get motivated to convert their production from conventional to organic. Milko is a dairy association that has chosen to focus on organic products, they want to be the leading organic dairy association, and therefore they have a large need for organic milk (Milko, 2008).

Uncord Audio - Formgivning av produkt för trådlös ljudöverföring

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.

High Orbit Ion Cannon : Går det att skydda sig?

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

<- Föregående sida 37 Nästa sida ->