Most of the beef production in Sweden has been integrated with milk production. Since the 1990:s, the number of dairy cows has decreased. A specialised beef production has developed in purpose to compensate for this decrease. The consumption of beef have increased in the last decade, but the Swedish production has no followed this trend. In 2004, the percentage of beef self-sufficiency in Sweden was 60 %.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

Det fenomen som varit föremål för den här studien är psykosocial arbetsmiljö. Fenomenet har undersökts med inriktning på tillverkningsindustrin och organisationsformen Lean production. Studien syftar till att erhålla en djupare förståelse av hur medarbetarna i den här specifika kontexten upplever den psykosociala arbetsmiljön. De frågeställningar som studien ämnar besvara är:-Vad innebär en god psykosocial arbetsmiljö för medarbetarna i organisationen? -Hur upplever medarbetarna den psykosociala arbetsmiljön i organisationen? Studien genomfördes med ett induktivt förhållningssätt.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

The purpose of this essay was to try to find out if the optimal farrowing pen exists. By interviewing producers, veterinarians and salesmen and also through a literature study, I have tried to evaluate advantages and disadvantages regarding different types of pen formations and environmental details. The interviews with the producers showed that they all were satisfied with their particular farrowing pen. It also showed that one material can be functional in one farrowing pen but not in another. The determining factor for the outcome of the farrowing pen was the individual experience and the way of thinking of the producers. The veterinarians were of the opinion that there today were no existing farrowing pens that responded to the pigs needs. However, the results on the farms were generally good. The salesmen thought that the Production costs could be lower if a sort of a standard pen was used.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

Infringement of intellectual property rights often causes significant economic damage. The problem with illegal activity concerning counterfeiting is constantly increasing. The development has lead to constitute an extensive international activity which is harmful for intellectual propery owners, consumers and the society in general. Competing products tend to be increasingly similar to each other, with rather similar marketing-, sales-, and pricingstrategies. As a result, the trademark strongly affects consumers? selection-process during purchase.

The process of producing a video game is one that goes through a number of phasesduring the span of the entire production. One of these phases is the concept design phase,which is part of the pre-production. This phase is an important aspect of the productionas it is where all the different parts and ideas concerning the game are brought togetherto define what the game is going to be. Though a clearly important part of the videogame production surprisingly little research have been done on the subject of conceptdesign. This thesis presents what place concept design has in the overall game productionand how the design process is handled.

The structure and performance of grocery distribution in Sweden has changed profoundly since the second world war. Increasing access and usage of the private car, in combination with an accommodating town planning has enhanced the exploitation of scale economies within distribution firms. There is, however, some ambiguity concerning the overall efficiency of the distribution system when the costs associated with travelling and purchasing performed by households are treated as an integrated part of the total distribution cost function. The purpose of this master thesis is to develop the foundation of a spatial optimisation model, which defines the most efficient distribution system. The underlying idea is that the optimal localisation and size of grocery stores is a function of economies of scale within the firms weighed against distributions costs within the households, such as transportation costs.

The milk production per cow has increased considerably during the last 50 years and due to the breeding for higher milk production also brings decreased reproduction efficiency. In a Swedish study 1996 it was shown that on average only half of all estruses were detected. Every time a farmer fails to detect oestrus it costs the farmer about 1200 Swedish crones and the need of means of detecting oestrus is therofore large. With this study we wanted to investigate if heart rate respectively crystallisation of vaginal mucus (arborisation) could be useful means of detecting oestrus. We monitored two oestrus cycles in four heifers.

This report is written in cooperation with Skanska Sverige Hus Väst and it is discussing the role of site managers within the company. The report will bring up the demands that is put upon site managers and will also discuss stress related problems and how to change and develop the role as a site manager.We came up with three conclusions in this report. We believe that Skanska could develop VSAA to make it easier to use for site managers. We also believe that a further development of the project engineer is of great value, to give him or her greater responsibilities. The last conclusion is to change the responsibilities between the site manager and the production manager, to give the production manager a greater responsibility in the production..

This paper examines the texts written on shards from wine-jars found at El-Amarna, Tutankhamuns tomb (KV 62) and Deir el-Medina. Information concerning the administration of wine and its production, found in these texts, is examined. Wine was an important element in Egyptian society and a common iconographic motif in tombs at Thebes during New Kingdom.A survey on previous research on the subject is presented. This is followed by analysis of the different reoccurring elements found in the texts. A definition of the standard formulation of the wine jar label texts is given and the minimal level of information needed for the administration of wine production and distribution is identified. The chapter of the analysis deals with the various types of information given in the label texts, such as date, wine classification, and function.

The background of this study is the fact that it nowadays is more common to grow wheat after wheat. Usually we plow every autumn to remove the straw, and we wanted to study the effect of alternative methods to do it. We have done this experiment to answer the question if no tillage is better than conventional plowing. The results of the field experiment indicate that there is a link between plant establishment and the choice of equipment, but also a higher weed pressure in experimental plots with only ground tillage. The equipments which left much straw on the top of the ground the problems with fungi were more severe.