Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

This thesis has been performed for the company System Andersson as a part of the bachelors degree in information technology at the School of Engineering in Jönköping. The thesis is based on the development of an iPhone application.System Andersson has an application for Android that is being used for their MPS system (material and production control system). Their customers, however, have also showed interest in being able to use this application for iPhone.The students handle the subject of iOS developing, including the design of the application, the use of the development language Objective-C, the use of the scripting language of Json used for server connections and SQL.The primary goal with this thesis has been to improve the students knowledge in such subjects as application development for mobile platforms, in such areas as Xcode, which is the development platform that Apple uses and Objective-C, which is the development language being used. The result of this thesis is an almost fully functional iOS application, similar to the Android application with some functionality missing..

The global wood pellet market has seen a rapid growth after the adoption of the Kyoto protocol and the renewable energy incentives created within the European Union. The global consumption of wood pellets reached 13,5 million tonnes in 2010 and several experts estimate the consumption to be between 35-50 million tonnes by 2020. These forescasts raise the questions which regions that can supply this vast amount of wood pellets and what the conditions are for producing it. This study evaluates the conditions for wood pellet production and export from British Columbia, on Canada?s west coast, focusing on existing industry structure, raw material supply and the distribution chain.

During the last decades the importance of IT has increased for businesses all over the world. It has transferred from only being used in administrative purposes to become more integrated to the core business. Due to the financial crisis in 2009 and increasing globalization, IT is facing the challenge of lower costs and increased efficiency. This requires IT-departments to embrace new strategies in order to fulfill these new tougher demands.Lean is a business development concept that aims to lower costs through more effective processes by removing all activities that does not create any value from the end customer?s perspective.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

Through the rulings RÅ 2010 ref. 11, HFD 2011 ref. 75 and HFD 2011 not 88 the Swedish Supreme Administrative Court have extended the concept of same or similar activities which can be found in section 57, clause 4 of the Swedish Income Tax Act. Through the ruling the Court has partly clarified the application area of the regulation but question marks still remains.In the statutory text there is no definition of what shall be regarded as same or similar activity and the preparatory work does not give any further direction on how the concept should be interpreted. Ever since the amendment in 1995 the general view has been that activities can be transferred between different companies without affecting the waiting period in the company of origin.

This study was performed to examine whether horses that are kept alone in smallpaddocks are less likely to suffer injuries, compared to horses kept in biggerenclosures with the company of other horses, or not. In not yet published researchmaterial from 2005, risk factors associated with ?accidental injuries? versus ?wearand tear injuries? (represented by trauma injury and fetlock inflammationrespectively), were compared. That material, based on the results of 507 returnedquestionnaires from owners of horses in a Swedish insurance company, includedquestions about paddock/pasture confinement. The results from those questionswere then analyzed in this study in a so called case-control study, in which thegroups with trauma and fetlock inflammation were compared to a healthy controlgroup.The results show that the risk of fetlock inflammation is greater in a smallconfinement, OR for inflammation in a small paddock is 2,2 (95% KI 1,2-3,9)compared to a bigger paddock.

Den övergripande avsikten med denna uppsats är att försöka ge en nyanserad bild av organisationsreceptet Lean Production. Vidare försöker jag utröna vilka potentiella vinster och risker som kan tänkas uppträda i samband med implementeringen av Lean Healthcare på Universitetssjukhuset i Lund. Utgångspunkten för denna analys är Region Skånes verksamhetsmål gällande personal, patienter och ekonomi. Analysen visar att det inte är helt okontroversiellt eller oproblematiskt att anpassa och införa produktionssystemet. Allvarligast verkar konsekvenserna kunna bli för tillgodoseendet av personalmålen, medan det ser mindre problematiskt ut gällande de ekonomiska målen och patientmålen.

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

We performed our thesis at SCA Hygiene Products in Falkenberg. Our task has been to present a suggestion for a solution of the packing of giveaways that the company uses.In the current situation the work is performed manually, and the company wants to automate the process. In the following report, we present the different solutions that we have developed in our definite model. It includes a picking solution, a shaking table and trays. The product choices we have made are based on existing solutions.To help, we have used Fredy Olsson's books in principle and primary structure.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

In order to suggest improvements for the logistics of STARKA, we felt that we had to analyze all the activities which were related to STARKA's logistic processes. Our primary analysis consisted of a rough but comprehensive description of different functions in the company, and the relationship between them. This was performed by following a typical order through the company to see which functions were affected by the order.Since we needed a more thorough view of the company, we decided to analyze the different products STARKA currently has on the market, focusing on economic data such as turn-over, profit, profit margin, deficiency cost and cost of warehousing. We also analyzed the company's choice of manufacturing processes, organization, warehousing processes, strengths and weaknesses.These analyses gave us a clear understanding of the company and its processes. STARKA is a small, function oriented company with a wide range of products.