Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

Our aim with this study has been to show the central factors that we consider have had animpact on public libraries in the "information society". We have studied two communities in the south of Sweden, Ronneby and Sölvesborg. These two communities have both started a development to the IT society, a society where information plays a great role, where the technique is the tool that supplies information.Ronneby community had early the aim to be the chief Swedish information center. A priority on information technology has therefore been obvious for them. Sölvesborg community has had another method and time schedule towards the IT society.We have been studying the documentation of aim and the strategy for IT development in different levels.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

The aim of this two years master?s thesis in Archive, Library and Museum Studies is to analyse how Swedish cultural history museums work to include LGBTQ-heritage (LGBT is the acronym for Lesbian, Gay, Bisexual, Transgender and Queer) in their collections. This work is articulated around three research questions. These interrogate museum practice about collecting and collection management, what it looks like in the already gathered collections as well as the implications such work implies on a broader level. The theoretical framework throughout the paper is gender and LGBT studies as well as queer theory.

Den övergripande avsikten med denna uppsats är att försöka ge en nyanserad bild av organisationsreceptet Lean Production. Vidare försöker jag utröna vilka potentiella vinster och risker som kan tänkas uppträda i samband med implementeringen av Lean Healthcare på Universitetssjukhuset i Lund. Utgångspunkten för denna analys är Region Skånes verksamhetsmål gällande personal, patienter och ekonomi. Analysen visar att det inte är helt okontroversiellt eller oproblematiskt att anpassa och införa produktionssystemet. Allvarligast verkar konsekvenserna kunna bli för tillgodoseendet av personalmålen, medan det ser mindre problematiskt ut gällande de ekonomiska målen och patientmålen.

The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Ämnet för uppsatsen är att undersöka vilka kommunikationsverktyg gymnasieelever på Kungsmadskolan i Växjö använder sig av för att kommunicera på Internet, vilka motiv som ligger bakom valet av kommunikationsverktyg och det fortsatta användandet. Uppsatsen inriktar sig på fem olika typer av kommunikationsverktyg: chatt, Internetforum, community, Internettelefoni och e-post. Undersökningens syfte är föreståelseinriktat, vilket innebär att vi ämnar att undersöka och förstå vilka motiv som avgör gymnasieelevernas val. Vi har valt en kvalitativ metod för vår undersökning. Vi har genom diskussion med två stycken fokusgrupper indelade i en med bara killar och en med bara tjejer från Kungsmadskolan i Växjö samlat in empirisk data.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

Sweden has an environmental goal to achieve until the year 2020. To achieve this goal the construction business has to take an initiative to use the modern techniques that are available to lower the energy consumption I buildings. There?s also a debate going on today regarding the energy demands set by the Swedish government through Boverket, some communities throughout Sweden thinks that the demands are to low and have therefore set up own demands regarding energy in buildings.The possibility to construct energy-saving buildings is today very great, with energy-efficient heating-systems and dense climate envelope. The interest to raise energy-efficient buildings have also increased as a consequence that the population have become more aware about their impact on the environment.

This report is the final result of the master thesis that have been done at  Sharpman Engineering. Sharpman Engineering is a small development and manufacturing company that produces and make drawings for everything from heavy duty log raft to aids for disabled people. The purpose have been to make one concept that make it easy for elderly and people having problem with knee- and back problem to stand up from a sitting position. The final result will the company have for further investigations and use for a pre-serial production with the goal to produce a new working product.To get an overview of what is on the market have a comprehensive survey has been done, followed by a survey on patent. This patent survey are for no intrusion on existing patents should occur and give new ideas.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.