Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

Today´s debate in farming is being focused on tourism, outdoor life and hobbies in the rural areas. This is of interest also for the general public as a way of counteracting the depopulation of the rural areas. Within the last years, the farming has become more technically advanced and hence efficient. This has led to increased production volumes and wider selection of products with lower margins for the farmer as a consequence. When the profitability is reduced, the farmer is faced with the choice of either increasing efficiency or diversification of the business.

ABSTRACT System development has become more and more concentrated on development for the Web and this has resulted in larger target groups. It will most surely continue to be so considering that the Web will be the infrastructure of business and services in the future. A big target group involves that the owner of a system can earn a lot of money from the paying users, but that assumes that the system can meet user needs. If a system on the Web does not satisfy the user?s demands then they will use the competitor?s system instead because it is only a mouse-click away.

The study has been conducted to find out whether aesthetic expressions and experiences can benefit the smallest children's language development. How do the teachers at the preschool relate to aesthetic expression? Do they think that aesthetic expression and experience will be favorable for stimulating children's language? Children perceive through their senses, logically aesthetic expressions should promote children's learning and development. How does this claim stand in relation with the smallest children's language development and teachers' views on aesthetics as a pedagogical tool for language stimulation? To get closer to the answer a survey have been done.

Den övergripande avsikten med denna uppsats är att försöka ge en nyanserad bild av organisationsreceptet Lean Production. Vidare försöker jag utröna vilka potentiella vinster och risker som kan tänkas uppträda i samband med implementeringen av Lean Healthcare på Universitetssjukhuset i Lund. Utgångspunkten för denna analys är Region Skånes verksamhetsmål gällande personal, patienter och ekonomi. Analysen visar att det inte är helt okontroversiellt eller oproblematiskt att anpassa och införa produktionssystemet. Allvarligast verkar konsekvenserna kunna bli för tillgodoseendet av personalmålen, medan det ser mindre problematiskt ut gällande de ekonomiska målen och patientmålen.

The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

AbstractThis study aims to describe and analyze how the 15 municipalities of Västerbotten County consider regional targets of development in their comprehensive plans. The study also investigate if there´s any need of improvements for the consideration of regional targets in comprehensive planning.This paper is based on studies of comprehensive plans in Västerbotten County and on three interviews with employers of different municipalities in the county. An thematic analysis were used to analyze documents and interviews.The result shows that a new comprehensive plan generally takes more consideration to regional targets of development than older plans. The consideration varies a lot between the municipalities of Västerbotten County and it can be explained by many reasons. The informant?s points out that lack of resources- and competence plus a deficient dialog between municipalities and regional organizations are the mainly causes.Keywords; regional development, comprehensive planning, strategy for regional development, regional development program, land-use planning.

The aim of this master?s thesis is to investigate a possible connection between the development of mobile library services in Sweden and the development of cultural policy during 1945-2006. Our main question is: is there a connection between the development of the mobile library services in Sweden, as described in Biblioteksbladet, and the development of cultural policy as portrayed by Anders Frenander and Dorte Skot-Hansen? In order to answer this question, we formulated two secondary questions: - How are the mobile library services described in Biblioteksbladet between 1945 and 2006? - Are there any similarities or dissimilarities between the development of the mobile library services and the development cultural policy as described in our theoretical models? If so, in what way? Our study covers the entire time period since the start of the mobile library services in Sweden in the late 1940s. The final year for our investigation is 2006.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

The number of locals in Stockholm who chooses the bike in front of public transport has increased significantly in recent years. The product purchaser of this project, Joakim Victorin at Sigma AB, has a keen interest in cycling, which resulted in a fairly obvious topic of this project; through a web application Sigma AB wanted to make it possible to handle results from professional as well as amateur competitions in cycling.The purpose of this web application is to simplify reporting and handling of competition for both small and bigger bicycle races. By providing the users of the system a platform independent client, any available device may be used.This thesis has followed the development principles which prevail on the ASP .NET MVC 3 concept. When developing the system the Microsoft Visual Studio 2010 development environment was used. The framework and the pattern of ASP .NET MVC 3 is a prominent part of today?s web development.

This study aim to investigate the conditions framing the professional development situation for physical education teachers (PE) in a small municipality in the south of Sweden. The Swedish National Agency for Education declare that "focus must be directed towards strengthening the teachers' profession", and that "schools need well-trained teachers and good teaching to help students achieve good results". The study focuses both the schools? contribution and the way in which the teachers take own initiative and are motivated to develop their professional skills. The investigation is all based on teachers' perspectives.