Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

This thesis examines the impact that the Euoropean Agricultural Policy has had on the tobacco regime during the years from the start of the Common Market Organization for Tobacco in 1970 til the days of today. The Truman method has been employed to estimate the degree of change of trade creation or trade diversion on the domestic market and also on the worldmarket. From these facts an analysis has been made to investigate how and if a new reform of the CMOT will affect the European tobacco market. Through the CMOT, the European Commission has tried to rise the quality level and the prices of raw tobacco growing in Europe. The european market value for tobacco has been rising and a marginal grade of of trade creation within the union and a grade of trade diversion to third countries has been shown since the implementation of the tobacco regime.

Lao People?s Democratic Republic (PDR) is a country where the majority of the population works within the sector agriculture in one way or another. The number of goats are increasing and the animals can be an important income source for families. However, during the dry season, lack of feed is a great problem for the farmers. Fodder trees have shown great potential as dry season feeding, due to that the trees often hold green and fresh leaves a long time into the season, compared to grass that dry out quickly.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Due to the technical development the enterprises of today are forced to creative thinking when it comes to marketing of their products. An example of one of these new methods are the development of product placement which has come to an interesting turn namely advertiser funded programming (AFP). Instead of the product just being a small part of the storyline it has become the story itself. The purpose of this study is to analyse how the advertiser funded tv-production Roomservice, a Swedish home styling program, communicates with it?s viewers as well as how they perceive the message.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

Aquaponics is a food production system consisting of a consecutive cultivation of plants and aquatic animals, fish or shellfish, in recirculating water. The plants feed on the nutritious effluents from the fish tank and bacteria converts ammonia from the fish tank into nitrate that is absorbed by the plants. The plants receive nutrition and the fish gain purified water. The environmental impact of the production of fish meal and fish oil used in conventional fish feed includes a large consumption of fossil fuels with subsequent carbon dioxide emission. The aquaponic system can be made environmentally sustainable and self-supporting if supplemented with a vermicompost/vermiculture for the production of worm protein as a fish feed. Vegetable waste from the hydroponic part of the system can be reused as worm feed in the compost and the protein rich worms can be harvested, dried and grinded and brought back to the aquaculture as fish feed. As a first step in this direction, I have investigated the effect of recycling of vegetable waste in vermicomposts on the growth and number of earthworms (this was evaluated after harvesting). The hypotheses were that earthworms can be cultivated in the vegetable waste and that by adding manure to the vermicompost it is possible to obtain a nutrient content adequate to support a continuous worm harvest, in other words create a vermiculture. Eisenia fetida and Dendrobaena veneta were grown in 20 L bins containing peat mixed with either poultry or cattle manure. The proportions were 70% peat and 30 % manure. Discarded plant parts from lettuce cultivation was added to the vermicomposts (35 g per week) and water was supplied with 0.8 L per week.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.

Syfte: Syftet med studien är att belysa forskning och litteratur kring Lean Production utifrån två vetenskapliga synsätt. Studien syftar även till att undersöka en organisations införande av och arbete med Lean Production, för att kunna ge praktiska bidrag om hur detta arbete kan fortskrida.Metod: Studien har genomförts med en kvalitativ och öppen ansats inom ramen för en fallstudie i samarbete med Sandvik Materials Technology. Empiriskt material har samlats in genom intervjuer och observationer med och av operatörer, produktionsledning och stabspersonal. En omfattande analys av litteratur och forskning kring Lean Production har legat till grund för en teoretisk referensram.Resultat & slutsats: Belysningen av Lean Production visar att systemsynsättet beskriver konceptet som ett säkert recept för framgång, trots sin förenklade syn på organisationers påverkan av omvärldsförändringar. Det socialkonstruktivistiska synsättet visar att Lean Production har en legitimerande funktion i organisationer, men ger liten kunskap om de förändringar som sker i organisationer.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

Our project is divided into two parts, one production and written report. The main focus was the production part, were we used PHP to create simple solution for handling SMS and MMS with direct communication with the mobile operator server. We communicate with sockets and can handle CIMD2 and MM7 protocol. To get our components easy to use we have created two classes to handle SMS and MMS. To demonstrate our technical platform we created a website were you can create an account.