The idea of using algae in different areas and exploring its possibilities is nothing new. Already in the early 1950s microalgae was explored as a possible food resource because of its high protein content. Lately there has been an increased interest in its potential for industrial use. Wastewater treatment is a possible use of algae since the algae grow well on the nutrients present in the water. This offers the possibility to grow algae for nutrient reduction and use the biomass for energy or animal feed since many alga species has a good nutritional value. Approximately 800-1000 m3 water is applied per 1000 m2 of greenhouse area during one season in a tomato production.

BackgroundThis paper is based on an issue raised by the organization Energigas Sverige, which together with the Ministry of Finance has posed the question about the fiscal impact of an increase in biogas production. Since the fiscal effects of an increased biogas production are both positive and negative, due to reduced use of fossil fuels, we want to investigate this further.PurposeThe purpose is to describe and explain the obtained fiscal impacts of an increased biogas production and based on our problem: ?What are the obtained fiscal effects caused by an increase in biogas production?? we could see the following fiscal effects: positive impact on employment, increased revenues of social security contributions and income taxes, reduced unemployment costs and reduced tax revenues on fossil fuels. These effects are summarized in a negative tax revenue of 2,6 billion SEK. Along the summarized negative effect we also accepted one of the two prepared hypotheses, which stated that an increase in biogas production leads to a negative fiscal impact. Design/Methodology/ApproachWe have chosen to work from an Anglo-Saxon scientific tradition and furthermore, we have a positivistic approach when we want to explain the relationship between cause and effect of an increase in biogas production and the following fiscal impacts.

This paper is finishing part of the two-year master programme in Industrial Engineering and Management.Initially there was an inquiry of studying the queue-times that Fläkt Woods uses when they break down internal working orders. These times were assumed to be too generalised and does not apply to the actual value of the queue-times which generates incorrect data and delivery delays. During the work of this paper it has been established that it is not the queue-times that is the biggest problem. The problem is the shop floor control and the lack of manufacturing the right products at the right time. Therefore an analysis of the production planning process was made to bring forward the real problems.

A growing interest for the climate and the environment has led to an increased interest forenvironmentally friendly and renewable energy sources, such as biogas. Planning new biogasplants requires a decision basis including facts about approximate amounts of biogas possibleto produce at the plant. The purpose of this thesis is to develop a model that calculates theapproximate biogas and digestate production from a planned or existing biogas plant.Developing the model required a literature review and studies of calculations concerningbiogas and digestate production performed by WSP Sweden AB. As a complement to themodel development, facts about substrates for biogas production were compiled through aliterature review. In addition the methane potential from selected materials was determined bybatch experiments.

For a long time the Swedish forests were used by the landowner?s mainly for providing wood to the household itself. The wood was not, to a greater extent, considered a product to be sold. During the 1800s the industrial era led to a demanding need for wood in the industry and thus the use of forest, forest production kicked off. The forest production was not regulated by law, which led to a differentiated forest production over the whole country without consideration of re-growth.

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.

Cattle production systems are changing to bigger intensified systems with larger numbers of animals per farm and more free range systems while at the same time employing fewer people. Aversive handling has been known to affect cattle production negatively for many years, but lately scientists have started to focus more on what positive effects gentle handling and positive human-cattle interactions may have on beef and dairy production. Fear can cause high stress in production animals and this can contribute to not only reduced production within beef and dairy cattle, but also increased risks for accidents and decreased animal welfare. Therefore, by reducing the fear cattle experience of humans, it could be possible to increase production, decrease accidents and increase the welfare of the animals. Reducing the animals fear and stress can be done by simple means, such as walking and talking calmly around the cattle, associating humans to positive feelings (such as feed) and stroking the cattle?s body regions associated with social grooming.

The purpose of this essay is to evaluate how the big changes in prices are effecting pigproduction. My calculations show how much there will be left for interests and amortisation. I?ve chosen not to calculate the costs of buildings. The condition from the beginning is a production of pork with 10.000 pigs per year. Instead of buying piglets, I?ve calculated on breeding them and for that purpose I will need 440 sows. I?ve investigated the working hours and given examples of how to decries these. My conclusion is that with the prices we have to day, pork production is a hard business..

Denna uppsats undersöker hur ledarstilen påverkas av anammandet av filosofin inom Lean Production. Syftet är att granska hur ledarna kan kombinera dynamiken bakom ett pedagogiskt ledarskap och medarbetarnas medinflytande med principerna inom Lean Production. Vår uppsats bygger på den empiri vi samlat in genom sex kvalitativa intervjuer med både ledare och medarbetare på tre avdelningar inom tre olika organisationer. De teoretiska utgångspunkter vi använt oss av grundar sig i huvudsak på Arne Malténs dimensioner kring ett pedagogiskt ledarskap. Analysen är sedan strukturerad kring dessa dimensioner.

Studies on wild boars have shown that piglets at 10 to 12 days of age can be introduced to pigs outside the litter without fighting. In today's production systems, the litters are kept in separate pens until weaning. At that point, the litter is divided and the piglets are placed together with piglets from other litters. This usually leads to aggressions among the piglets and may cause stress. This literature review aims to find out how piglets perceive other pigs in their surroundings.

Angelica archangelica (Garden angelica) is the only Medicinal and Aromatic Plant (MAP) with a Nordic origin. The plant can reach up to three meters when cultivated. Angelica archangelica is used as flavouring in additives, honey, beverage base, essential oils, fol-klore medicine and as ornamental for decorative purposes. Commercial cultivation is mainly focused on root production. Production countries are Poland, Netherland, France, Belgium, Switzerland, and former Czechoslovakia with an overall yearly world production of 1000 kg of essential oils.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.

Using the Introductory Carbon Balance Model, ICBM, five different crop rotations with rye 1. Rye-Ley-Ley-Rye-Beans-Rye 2. Rye-Rye-Rapeseed-Rapeseed 3. Rye-Ley-Ley-Rye-Potatoes-Rye 4. Rye-Rye-Potatoes-Wheat 5. Rye-Rye-Potatoes-Beans-Wheat-Rye-Potatoes-Rapeseed were tested theoretically in four different cultivation scenarios ? Straw left on the field, biogas digestate added as fertilizer. Labelled ?+straw+BD?. ? Straw left on the field, only synthetic fertilizer. Labelled ?+straw-BD?. ? Straw harvested, biogas digestate added as fertilizer.

Dairy farmers using artificial insemination (AI) are dependent on effective oestrus detection. In Sweden, AI is used for a majority of all dairy cows and oestrus synchronisation with hormones is not allowed. There are reports of declining ability to express oestrus with higher levels of milk production. This makes oestrus detection more difficult. Several aids for oestrus detection have been developed, for instance pedometers and mounting detectors.