Companies become more and more aware of the added values of the packaging. A well chosen and developed packaging can reduce the costs for the companies through reduced costs for transports, reduced quantity of waste and discards and increased goodwill for example. The companies? costs for salaries can also be reduced due to the increased packaging handling efficiency and the reduced costs for sick leave, reduced work capacity and rehabilitation etc. that can arise when handling poorly developed products and packaging.

Are agency and responsibility solely ascribable to humans? The advent of artificial intelligence (AI), including the development of so-called ?affective computing,? appears to be chipping away at the traditional building blocks of moral agency and responsibility. Spurred by the realization that fully autonomous, self-aware, even rational and emotionally-intelligent computer systems may emerge in the future, professionals in engineering and computer science have historically been the most vocal to warn of the ways in which such systems may alter our understanding of computer ethics. Despite the increasing attention of many philosophers and ethicists to the development of AI, there continues to exist a fair amount of conceptual muddiness on the conditions for assigning agency and responsibility to such systems, from both an ethical and a legal perspective. Moral and legal philosophies may overlap to a high degree, but are neither interchangeable nor identical.

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.

The first of the dual purposes of this work has been to describe the research that has been done regarding the root causes of terrorism and second, using a general causal theory and examining the political dimensions of it, to discuss whether or not general causal theories (grand-theories) are helpful for researchers and policy-makers when reacting to social developments in the form of terrorism. The essay is a qualitative literature analysis and I have based my studies on mostly new books treating root causes of terrorism. I have concentrated on discussing international terrorism and how political dimensions may impact the occurence of this form of political violence. The conclusions I have made is that there is no widespread consensus among researchers and scholars as to what really causes terrorism. Neither can the general model examined in chapter 5 be used to predict when and where terrorism will occur next.

Purpose: The study aims to analyze how companies can learn from past communications in critical situations and during corporate crisis, and see how they use this knowledge in the management of subsequent critical situations and corporate crisis. Furthermore, the media is analyzed to see how the newspaper industry chooses to reflect an organization and its actions, and also to see if the pressure through articles in the newspapers has an impact on the extent of the situation.Method: A qualitative case study of Sweden?s largest food company, ICA Sverige AB, where knowledgeable people in media management within the company are interviewed using semi-structured interviews, with support of quantitative methods by a collection of articles from the news press.Theories: Concepts, theories and models in crisis management and communication has been applied to relevant data. These comprise Knowledge Management, a communication template in crisis management, The Situational Crisis Communication Theory (SCCT) and the model Content of crisis communication.Empiric: Based on the quantitative data consisting of articles from four Swedish news sources: Svenska Dagbladet, Dagens Nyheter, Aftonbladet and Expressen, a semi-structured interview guide was created and carried out with the person within ICA who possesses knowledge of the subject area.Conclusion: ICA has during the priod studied exhibited to have used the concept of Knowledge Management in the development of their routines regarding product recalls at product defects. The relationships between ICA and the media have shown improvements, which has resulted in ICA percieve the media coverage as balanced, true and fair..

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

This work reveals the results of BAL performed on horses included in a larger study that assessed the relationship of amount and type of inhaled particles in equine stable air on indices of respiratory inflammation in horses and people. During this study an unanticipated and marked elevation in lung eosinophils was detected in a number of the horses. The possible significance and cause of this pulmonary eosinophilia was investigated further, and is the main focus of the work presented.

SMC Pneumatics is a world leading company in pneumatics. In Sweden, they have about one third of the pneumatic market. The company has noticed that their air preparation series not always have the appearance that the costumers are looking for. Their competitors have on their similar products put more effort in making them more attractive. To solve this problem it has in this project been developed a concept for aForm Shell.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

Abstract This Concept Analysis according to Walker & Avant (1995) studies the concept of uncertainty in the nursing context. It consists of four parts where uncertainty in general have been encircled in a semantic analysis (part one) and a qualitative content analysis consisting of an questionnaire, distributed to the staff members at one nursing and medicine institution, with an open question about the meaning of uncertainty (part two). The third part is a literature study of the nursing context to find out how uncertainty is described (part three). Part four is the actual concept analysis based on the three first parts. Uncertainty in the nursing context is an individual conscious experience witch is changeable and impressionable. It is chained together with its antecendents and consequences.

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..