The agricultural plantingmachines are used just a few weeks every year. That means that the supply of service and spare parts have to be good to make the timeliness costs low at the agricultural hard working periods. The machines wear down successivly when they are used. The wear is harder on some parts than the others on a machine. Spare parts can be dicided into consumables.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.

About 80 % of all Swedish dairy cows are kept in tie-stalls, but loose housing is increasing, probably because it is more profitable for the farmer. The design of the floors is of cruicial importance to the cows well-being. Traditionally, the most common type of floor in the alleys of a cubicle system still is a slatted manure-draining floor made of concrete. The typical Swedish design has 125-mm slats and 40-mm slots, maximally. With too wide slots, there is an increased risk of injuries to the claws when the cow makes a hasty move.

Abstrakt Klämning mellan dörrblad och dörrkarm är en frekvent förekommande olyckstyp som drabbar såväl barn som vuxna i alla åldrar. I genomsnitt drabbas var fjärde svensk någon gång under sin livstid av så pass allvarliga skador till följd av klämning i dörr, att sjukhusvård krävs. Som regel är det handens fingrar som skadas. På marknaden finns ett stort utbud av tekniska lösningar som i någon mån syftar till att förhindra klämskador i kontakt med dörrar. Dock är de flesta av dessa lösningar utformade för dörrens gångjärnssida.

Studies have shown that user participation is a good method when improving or developing a product. The method gives a company insight in what the customer wants and needs. It has also been shown that user participation benefits all parts included. For example, it creates a greater relationship with customers than most other methods do. Webportals is one of the most interactive systems online and it gives companies a unique chance to improve and maintain their relationship with customers.

This degree project concludes the Innovation and Design Engineering programme at Karlstad University. The project was carried out by David Brocker, Erik Hallberg and Andreas Hertzman during the spring of 2006 and corresponded to 15 weeks of work per student. Assigner was Martin Larsson at Arexor and instructor at Karlstad University was Monica Jakobsson.Arexor has a patent to a construction of an electrical skirting board with moveable wall sockets, called Electrical Track System. The lowest parts of the interior walls along the floor are today almost always covered by a conventional skirting board. Arexors patented product replaces that with the possibility to move and increase the number of wall sockets by choice along an electrical skirting board.

The high viscosity of barley material makes starch isolation problematical using regular methods established for cereals. An adjusted starch isolation method has been set up for barley, based on fractionation and purification. The focus is on attaining truly representative isolates of six flour samples selected for widely differing characteristics within the research program BarleyFunFood (BFF). Beside establishment of the method, this diploma work aspires to serve the BFF with isolated material of sufficient yield valid for further starch characterisation. A pre study was conducted evaluating available wet mixing equipment, experimental conditions and mode of procedure.

Abstrakt Klämning mellan dörrblad och dörrkarm är en frekvent förekommande olyckstyp som drabbar såväl barn som vuxna i alla åldrar. I genomsnitt drabbas var fjärde svensk någon gång under sin livstid av så pass allvarliga skador till följd av klämning i dörr, att sjukhusvård krävs. Som regel är det handens fingrar som skadas. På marknaden finns ett stort utbud av tekniska lösningar som i någon mån syftar till att förhindra klämskador i kontakt med dörrar. Dock är de flesta av dessa lösningar utformade för dörrens gångjärnssida. För dörrbladets låssida existerar inget klämskydd som kan göra anspråk på att vara heltäckande.

Neoplasm 2.5D, is a project centered around exploring possibilities of combining various digital tools with the use of a lasercutter, to create intricate patterns withillusions of depth and texture, and to combine these studies into a working fullscale model that could be the basis for a future design product..

Together with Hälsoteknikalliansen the project team recognized the need to improve availability in the staircase environments. This is a difficult environment, especially for our elderly. The staircase leading to and from apartments is such a major obstacle that many people do not dare to go into the staircase leading to their front door. The market study that the project team conducted showed that many were in need of a living support, often a relative, who helped and supported them when they went into these stairs. It also appeared that these people manage everyday life just fine, but they suffer the problems that stairs to and from their apartment causes.

A discussion regarding the alignment and measuring procedure of propeller shafts has arose due to the competing situation in the industry, and higher standards from the customers. An estimation of the deflection of shafts in different alignment situations has been made with help of FEM-analysis and beam theory. This has been analyzed and compared with the experience from Rolls-Royce AB suppliers of shafts. An evaluation of measuring protocols has been made and the result indicates that there is a correlation between the deflection of the shaft and the run out. Results from a measuring test performed by Balino, Spain, verifies this conclusion.

This thesis seeks to investigate the relationship between municipal policy for housing supply and the planning of new housing in Sweden. Through a case study of Göteborg municipality and a comparative content analysis of Göteborgs policy for housing supply and a number of plans featuring housing the analysis seeks to investigate the effect of policy for housing supply as a tool for securing the demand for housing in the Swedish municipalities. The thesis also seeks to discuss its findings using theory concerning the implementation of policy and the general planning situation for Swedish municipalities today. The result of the analysis shows that most plans fail to regulate most of the content suggested in the policy for housing supply, particularly regarding aspects such as pricing, type of housing and type of ownership. The result also points towards a relationship regarding the prevalence of municipal land contracts and compatibility to policy for housing supply as well as a connection between how extensive the plans are in their proposed land use and their compatibility with policy for housing supply.