The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

Uppsatsen är ett examensarbete på 15 hp inom produktdesignprogrammet på Malmö högskola. Projektet hanterar blöjors utformning med ett resulterande förslag på hur denna produkt kan förbättras, med en fördjupning inom hållbar utveckling. Resultatet blev en blöja med inlägg, för den mer omedvetna konsumenten, som minskar antalet byten och därmed mängden miljöpåfrestande material som behöver tillverkas och slängas I fördjupningen intervjuades Olof Kolte, framträdande industridesigner som verkar inom hållbar utveckling, och en litteratursökning på området utfördes. Förundersökningen angående blöjor baserades främst på kvalitativa intervjuer, och konceptualiseringen baserades främst på ett antal brainstorms och en metod som kallas bakåtmetoden, utvecklad av Edward de Bono, författare och konsult inom lateralt tänkande..

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Almost every commercial in television nowadays aim to sell a product or service. This researchpresents two big actors in the grocery chain and their respective commercials. The two actors thatare presented in this research are Lidl and Coop. Both Lidl and Coop are among the largest grocerychains in Sweden. By examine two commercials from each company we aim to find how theircommercials are structured.

Background: Commerce over the Internet has exploded in recent years. For many companies it has become a necessity to offer their products overthe Internet. This new market ought to change the conditions for relations between customers and suppliers. Purpose: Our aim is to describe and analyse the factors that influence the relations between customers and suppliers, from a customer view, when commerce is conducted over the Internet.Delimitations: The study is limited to B2B commerce with IT-products. Methodology: The thesis is based on a study of the company IMS, their e-commerce site and organisations that buy IT-products over the Internet.Conclusion: Internet opens up new possibilities for custom designed offers.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

The taste of the dairy product is probably the main factor determining consumer?s dairy products choice. Consequently it is of great importance that the product tastes good and as expected every time. Off-flavors in milk can be caused by for example oxidation of the milk fat. Since copper is a prooxidant, a high copper content in the milk can cause oxidation.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..

Produktplacering utvecklades på 1920-talet inom amerikansk film och huvudsyftet då handlade inte om att tjäna pengar. Produkterna lånades på den tiden bara ut till skådespelarna för användning. Senare upptäckte företagen styrkan att koppla samman produkten med skådespelarna och produktplacering började att användas som ett promotionverktyg. Inte förrän på 1980-talet började företag betala filmbolag för att få placera sina produkter i filmer. Produktplacering används för att demonstrera hur produkten används, öka medvetenheten om ett varumärke och för att identifiera en livsstil på ett naturligt sätt.

Uppgiften som detta examensarbete går ut på är att utveckla en ny steghållare som ska ingå i Thules produktserie Professional. Det är önskvärt att kunna lasta stegen bakifrån och möjliggöra lastning från marken även på högre skåpbilar. Steghållaren ska framförallt vara anpassad till yrkesmän, såsom hantverkare, målare, etc. Därför söker Thule en robust, säker och lättmanövrerad steghållare med attraktivt utseende. Steghållaren ska minska den tid det tar att lasta på och av stegen.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

In this project I have worked with porcelain och and porcelain decors. The project was based on questions like why porcelain is such a richly decorated product and how you can maka a shape and a decor feel like a entirety. In December 2009 I went to China in search for answers and to study porcelain decors. This trip has been my inspiration throughout the whole project and also the main theme for the idea, the shape and the decor. That is why I decided to make a teacup with a plate that also has a function as a lid.As I first started working with the shape I was thinking to make a rounded teacup, inspired by the chinese rice bowls, but since I had to produce the porcelain by myself I decided to make a much more simple shape.

Recent corporate challenges require effective communication in order to secure a company?s reputation. Companies as a result, need to be committed to a series of corporate social and environmental practices along with their financial commitments to their shareholders and investors. In fact, businesses are required to go above their ordinary operations and involve all potential stakeholders that can be affected by their strategies. Companies also need to communicate social, environmental and economic consequences of their activities along with their CSR commitments to their internal and external stakeholders in order to make a better corporate image and improve their market opportunities.