This study examined the psychological processes of autonomic arousal and distress, erroneous beliefs about sleep, worry about sleep, selective attention and monitoring and safety behaviours related to sleep, on the subject of daytime impairments associated with insomnia. The psychological processes were evaluated against as follows: sleep measures, anxiety, depression, medical disease and the use of medications. The measure daytime impairments complied with the established research diagnostic criteria. A correlation analysis indicated that psychological process, anxiety, depression and one of the sleep measures are associated with daytime impairments. The results of a multiple regression analysis proved that only erroneous beliefs about sleep, worry about sleep and safety behaviours related to sleep are linked to daytime impairments associated with insomnia.

The last decades the increased computerisation at the places of work has led to new physical loads in the working life and new demands on the working environment. The widespread usage of computers in the working life has led to more sedentary work and less daily movement.The purpose of the thesis is to develop a new product to a concept that in a low intensive and healthy promotional way will activate the body. The product will make a combination of healthy promotion activity and work during office hours possible and primary aims to those with a sedentary office work, which leads to that the body don´t get to be activated in the extent needed.Information has been gathered from studies already made in this area, interviews plus a study and an experiment. From the gathered information concepts and functional solutions has been generated and evaluated to result in a product concept.The thesis has resulted in a concept that consists of a work place unit where the user walks on a treadmill and works at the same time.A general conclusion which can be drawn is that the majority of persons that tested to walk and simultaneously work with a computor on the treadmill found this way of working attractive. Many were positively surprised and said that they would use such an physically activating work place implement if it was available at their place of work..

Involving prospective users in a development process is important. This makes it easier to make a more usable product. This thesis is about developing an intranet targeting a school and focus is aimed towards intranet usability.The reader is given knowledge into how to design and implement an intranet using persona. Design and develop by using persona is difficult when there is a group with large variety of knowledge, age and technology interest, so as in this case. Persona although always helps during the development phase because of the strong links to the personas that are created, which gives developers a constant reminder of the end users of the system.The thesis describes how information is collected and processed.

GCM is a product information management system which handles data for consumer packaged goods. GCM was developed during the middle of the nineties and was acquired by Prevas AB in 2004. The GCM application relies on the services provided by the organization GS1, which supplies global specifications and validations for trade items across several sectors. GCM is updated regularly due to the frequent changes in specifications from GS1. However, the overall graphical user interface design has not been redesigned during these years.This dissertation studies possible improvements for the webpage that handles product data in GCM.

Nordic Marine Sauna AB has, since 2005, designed, manufactured and sold floating saunas. Theproduct are characterised by a well thought thru and appealing design and its high quality. Thecompany is now intending to open a new business area by starting a subsidiary, NordicSubmarine Sauna AB, which will design submerged saunas. The expected customers are leisureand conference centres as well as customers that seek an experience out of the ordinary.Due to the products technical complexity a master thesis was adverted. The task was to do aninvestigation whether such a product is technically viable.The job involved research of existing products and constructions material as well as designingthe product with CAD and FEM-programs.

It is important for firms to continually develop their offerings as the business landscape develops in order to sustain their competitiveness (e.g. Schumpeter, 1934; Ansoff, 1979; Porter, 1985; Trott, 2012). In a context of globalization, rapid technology development and changing customer needs, the paper packaging industry is urged to enhance its product development activities (Hansen & Niskanen, 2007; Björkdahl & Börjesson, 2011). However, there is little research about paper packaging firms? product development processes (ibid).

Background: There is no guarantee that products should be equitable produced. Many products in today's trade is produced by minors, resulting in poor working environment, and gives the workers low payment. Fairtrade is the only label on the market that ensures that farmers receive fair payment for their products. Aim: The central aim with our work is to see what the future consumers, in other words students from Lund's university, Malmö College and The Swedish University of Agricultural Sciences in Alnarp, think about products labeled with Fairtrade, and what they consider is value creation for food products. Students are often relatively young; they educate themselves and have new thoughts and valuations about how the world should be.

The rise of social media has put a focus on the division of owned, paid and earned media, where earned media has recently been hyped at the expense of owned and paid media. Due to a novel area we examine the differences and effects of using owned and paid media, specifically for packaging versus newspapers. Owned and paid media showed no significant differences regarding credibility, persuasion and perceived commerciality, which restored owned media?s status, especially since owned media is more cost efficient. The effects of allowing ads for external brands on the owned medium were also studied.

Background: Surgical complications has been the main cause of medical injuries and deaths worldwide. In 2008 WHO developed the checklist for safe surgery to reduce the number of surgical complications. The objective of the checklist is to strengthen already established safety routines and contribute to better cooperation and communication. Research shows that compliance to the checklist is deficient, which can affect patient safety.Aim: The aim was to study the extent to which theatre nurses participate in the use of the checklist.Method: Observational study was conducted with a descriptive design and quantitative approach. 24 observations were carried out with aid of an observation protocol of two surgical units at a hospital in central Sweden.Result: The results showed that Timeout initiated widely but compliance to all items was considerably lower.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

Inom hälso- och sjukvårdsområdet såväl som inom många andra yrkesområden förs idag en diskussion om säkerhet och hur denna kan upprätthållas. Anestesisjukvården är inget undantag. Den största delen av debatten ligger på en lednings eller chefsnivå, där man pratar om hela system som måste omarbetas för att finna en säkrare miljö för patienter och yrkesverksamma. Syftet med denna studie var att belysa och beskriva de metoder som de kliniskt verksamma inom anestesisjukvården kan använda sig av för att ge en så säker vård som möjligt till patienten i samband med anestesi. Metoden var en litteraturstudie som bygger på tio vetenskapliga artiklar.

The purpose of this study is to find out how some Swedish preschool teacher discussing how children's Swedish colloquial interaction can be enhanced in the free play. In this case where children are aged three to five.My research questions in the study are:-          What type of free play do preschool teachers talk about in relation to children's Swedish colloquial development?-          What do preschool teachers say about child's colloquial interaction?-           How do preschool teachers reason regarding in what environment children?s colloquial interaction occurs?In my study I have used an interview with elements of a visual method called The Diamond. The approach is that the participants in the interview will be enhanced to discussing about a wise certain number of images. These images are then to be ranked accordingly with a specific theme and terms.If a child has difficult to speak, you can take help of  the interest the child has, the child can tell you and the other children what he or she know about the interest.

The project this report is handling has been implemented on NBB, Nordisk Bilbelysning AB in Linköping. The company produces and develops lightning and searchlights for all types of vehicles. Lately NBB´s supplier of electronics, OSRAM, has developed a mercuryfree xenon lightsource. Mercury is one of the most hazardous environmental waste and to get rid of the mercury entirely in the lightsource is a big step that means alot for the environment.This lightsource will be placed in one of NBB´s worksearchlights called My, and will be sold as an alternative to mercurycontaining searchlights. NBB wants to put an environmental label on this product and they want to have essential information about the product that is needed for the production.

Purpose: The aim of this thesis is to examine how word of mouth and buzz marketing affects Uppsala´s businessstudents attitudes towards Red Bull. To solve this purpose we intend to answer some underlying questions.Theory: We have used relevant theories within word of mouth, buzz marketing and consumer behaviour. Our thesis will bring up the essential parts within these three different theories that we believe are relevant to our purpose.Method: In this thesis we have used both quantitative and qualitative methods such as interviews and questionnaires. The questionnaires will be handed out at Economicum at Uppsala University.Empirical study: This part is based on our questionnaires handed out to business students at Economicum, but also on our interviews made with employees working for Red Bull.Conclusion: Our empirical study has given us a clear picture of how Red Bull works and use marketing tools to promote their product. Through our questionnaires we have also found out what attitudes consumers has against the brand and the product.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.