Municipal safety work is an issue frequently discussed. The new legislation about accident prevention obeys the Swedish municipality to present an action program for accident prevention. In Borlänge municipality there has been no sanctioned proposal for a program. This report presents the problems found and gives proposals for improvements in the future safety work. The guiding words should be unambiguousness, able to control and not too complicated.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

Fall accidents are a big problem in the construction industry today and stand forapproximately 23% of all accidents. Skanska is a construction company that has avision toachieve zero accidents. Eliminating fall accidents is one step on the way towards theirvision. The state of Skanskas fall safety has been analyzed in this thesis to show whichimprovements are possible in fall safety.A literature study has been performed in which Arbetsmiljöverkets (The Swedishwork environment authority?s) laws and rules, together with Skanskas own rules havebeen studied.

The accident frequency in the construction industry has shown a downward trend every year but this trend was broken 2010th. It is often lack of precautionary measures within work environment and safety that is the cause of accidents. The big construction companies understand the importance of precautionary measures within work environment and safety, as they spend a lot of money and time on that matter. By examining the work environment and the safety of the small construction companies you can see how they work. The report will presents how these small companies work with work environment and safety, and also how they follow the safety instructions that are available and how they make use of safety equipment.

Sigill Quality Systems has been certifying beef since the autumn of 2006 using the brand name label Swedish Sigill. IP Sigill (the certifying system for integrated production) encompasses the values: animal ethics, food safety, free range and environmental concerns. Product quality is not yet one of these values, and there is a variation in the quality of Swedish beef. Swedish Sigill wanted to investigate the factors that influence product quality, review which of the present regulations that have an influence on product quality and formulate new regulations with the purpose of enhancing the product quality (sensorial, technological and nutritional quality). A survey of quality parameters and factors that influence product quality was done in order to establish a scientific foundation to work from.

Product development is essential for all companies that want to survive in competitive markets regardless of the characteristics of the product that the company sells. Companies that sell products within product categories which can be seen as bad, also need to develop their products in order to remain competitive. If these bad products add a positive attribute, for example that they get organic, a contradiction within the product arises and they get incongruent. This thesis investigates which effects that follow a launch of an incongruent product. The thesis also examines if these effects are affected by the strength of the brand under which the product is launched.A total of 240 respondents participated in an experimental study where product incongruity was manipulated for two different product categories, where one well known brand and one unknown brand were examined in each category.

The purpose of this study was to depict some elderly people?s experiences of personal safety alarms. Furthermore, the aim was to look into whether there is any difference in experience between men and women and depending on their level of care. Using a qualitative method, semi-structured interviews were carried out with eight elderly people; six women and two men. The main questions of the study were: How do the elderly people experience the practical use of personal safety alarms? In what ways, if any, do the elderly people experience that the personal safety alarm has changed their daily life? In what ways do the elderly people experience that the personal safety alarm effects their ability to stay in their own home? A cognitive perspective was mainly used to analyze the results.

This study investigates whether creative online product exposure within the clothing industry has a positive effect on the behaviour and attitude of today's consumers. Product exposure is the most important stimulus in the online marketing universe, yet few studies exist on this topic. Thus, this study pioneers in this specific research field. Through empirical analysis this study reveals that product exposure has a significant and direct effect on the perceived corporate ability and consumer involvement. Moreover creative product exposure indirectly increases the perceived product quality, intention to buy and the overall attitude towards the brand.

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

In a comparing survey this thesis investigatesclassification systems for dams in Sweden, Norway,Finland, Switzerland, Canada and USA. Theinvestigation is aiming at an understanding of howpotential consequences of a dam failure are takeninto account when classifying dams. Furthermore,the significance of the classification, regarding therequirements on the dam owner and surveillanceauthorities concerning dam safety is considered andreviewed. The thesis is pointing out similarities anddifferences in the line of dam safety.The survey of dam safety is firstly based upon legalrequirements in the different countries andsecondly on guidelines regarding dam safety. Damowners generally are ultimately responsible for thesafety of their dam, and often have their ownroutines regarding how this safety is to be achieved.In this thesis, however, the legal requirements aremainly focused upon.The investigation has resulted in an outlining ofeight areas, where the classification systems in thevarious countries have been compared.

Quality Control is a term often used within production and is referring to managing processes so they produce capable products. Within Quality Control, process capability index is a common measure to oversee processes. Safety Region Plots were introduced to do this graphically. In Albing & Vännman (2010) the concept of Safety Region Plots is expanded to incorporate an elliptical shape. The method of Elliptical Safety Region Plots assumes a normally distributed data.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

Title:Product abandonment ? A comparative study of five ABB-units Level:Master thesis in Business administration, spring 2011.Purpose:The purpose of this paper is to through a comparative analysis examine how different companies, within the same group, works with product abandonment and what factors influence the process.Problem:How important is situational and product specific factors in a product abandonment process in which the organizational factors are constant?Method:This study is based on primary as well as secondary data where interviews represent the primary data. Interviews, following the same interview guide, were made with five companies within the same group.Result:The results from the empirical studies presented in the text below recurring themes derived from the framework.Conclusions:Our conclusions are that the importance of product specific factors is of significant matters in a product abandonment process, even when organizational factors are constant. We base that on that although the companies are within the same group, under the same strategic direction and constructed according to the same organizational structure the product abandonment process is different for the respective companies.Keywords:Product abandonment, product deletion, product elimination, weak products, ABB .

AbstractThe Swedish school is the biggest place of work in the country. Statistics about the Swedish school shows that both students and teachers work in an environment who has elements of violations, threats and violence, and study environments where many students do not feel they have a study environment during class. The purpose with this study has been to investigate if teachers and principals is given the right conditions in their respective educations to pursue their professional profession to achieve the objectives of the goals with the systematic safety and work environment of the school's safety concerns. The study has been designed as an investigation about respective educations syllabus and has been examined by the presence about systematic safety and knowledge about work environment law in respective courses. The examination about respective educations syllabus has been done by a qualitative content analysis.

The aim of this paper is to examine the psychosocial work environment and safety culture in minor Swedish airports. The purpose is also to investigate the relationships between these two. The paper deals with theories regarding psychosocial work environment, organizational culture and safety as well as safety culture and safety climate. The participants are air traffic controllers working in minor airports in Sweden. The psychosocial work environment was measured with Copenhagen psychosocial questionnaire (COPSOQ) and the safety culture with the safety culture assessment questionnaire (SCAQ).