High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Almost every commercial in television nowadays aim to sell a product or service. This researchpresents two big actors in the grocery chain and their respective commercials. The two actors thatare presented in this research are Lidl and Coop. Both Lidl and Coop are among the largest grocerychains in Sweden. By examine two commercials from each company we aim to find how theircommercials are structured.

Background: Commerce over the Internet has exploded in recent years. For many companies it has become a necessity to offer their products overthe Internet. This new market ought to change the conditions for relations between customers and suppliers. Purpose: Our aim is to describe and analyse the factors that influence the relations between customers and suppliers, from a customer view, when commerce is conducted over the Internet.Delimitations: The study is limited to B2B commerce with IT-products. Methodology: The thesis is based on a study of the company IMS, their e-commerce site and organisations that buy IT-products over the Internet.Conclusion: Internet opens up new possibilities for custom designed offers.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

Title: To make a living by library music; Opportunities and prerequisites. The purpose of this essay is to investigate how a music producer or composer can achieve placement of his or her music in commercials, TV-shows, computer games, and other media. What is required to make a living by composing and producing music today? This is a qualitative study made by interviewing six persons, who all in some way work with this kind of music. The result shows that in order to reach out and place the music, an active net working, a deep knowledge in music production, in a wide range of music genres, is crucial.

The taste of the dairy product is probably the main factor determining consumer?s dairy products choice. Consequently it is of great importance that the product tastes good and as expected every time. Off-flavors in milk can be caused by for example oxidation of the milk fat. Since copper is a prooxidant, a high copper content in the milk can cause oxidation.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..

Uppgiften som detta examensarbete går ut på är att utveckla en ny steghållare som ska ingå i Thules produktserie Professional. Det är önskvärt att kunna lasta stegen bakifrån och möjliggöra lastning från marken även på högre skåpbilar. Steghållaren ska framförallt vara anpassad till yrkesmän, såsom hantverkare, målare, etc. Därför söker Thule en robust, säker och lättmanövrerad steghållare med attraktivt utseende. Steghållaren ska minska den tid det tar att lasta på och av stegen.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

In this project I have worked with porcelain och and porcelain decors. The project was based on questions like why porcelain is such a richly decorated product and how you can maka a shape and a decor feel like a entirety. In December 2009 I went to China in search for answers and to study porcelain decors. This trip has been my inspiration throughout the whole project and also the main theme for the idea, the shape and the decor. That is why I decided to make a teacup with a plate that also has a function as a lid.As I first started working with the shape I was thinking to make a rounded teacup, inspired by the chinese rice bowls, but since I had to produce the porcelain by myself I decided to make a much more simple shape.

Recent corporate challenges require effective communication in order to secure a company?s reputation. Companies as a result, need to be committed to a series of corporate social and environmental practices along with their financial commitments to their shareholders and investors. In fact, businesses are required to go above their ordinary operations and involve all potential stakeholders that can be affected by their strategies. Companies also need to communicate social, environmental and economic consequences of their activities along with their CSR commitments to their internal and external stakeholders in order to make a better corporate image and improve their market opportunities.

Websites are often developed by small businesses, organizations or individuals which may lead to that the testing gets left behind; the focus is on getting a finished product that can be deployed as quickly and as cheaply as possible.Functional testing is important also for websites and a variety of aids exist. With the right tools and methods the development work is facilitated, and it leads to products with fewer faults.This report shows in the form of a case study how an appropriate tool for functional testing can be selected and how it can be used within development of a website. An analysis of the tools available is reported and JSystem is selected as the most appropriate for this case.It turned out that JSystem could not be used fully as intended in terms of deployment, but a well-functioning alternative solution was developed.A number of test cases were created without any unsolvable problems and JSystem performed well. In JSystem test cases in Java are created in Java, which gives a high flexibility..

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..