The aiming with this project is to find out if a small scale chicken production can be profitable, from day-old chicks to a processed smoked product out to stores and consumers. The products will not be available in the stores all the time because we will give the customers quality rather than quantity, so when the product can?t be found in the stores the customers will ask for it. The conclusion I found out is that it might be hard to raise chickens in these scale from an economic point of view the costs for transport, logistics, slaughter and marketing are to high..

This work describes the process from sketch to functional textile. Starting points are thoughts about the transition from sketch to fabric, and the possibility to sketch before decisions are made about the quality of the final fabric. The first result of this study is the final product, a hand weaved clothing in thin wool that fulfils set demands. The second result is the knowledge that it is possible to make a purposeful sketch without knowing the final product..

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

Då mängden information bara ökar, så ökar även behovet att ha åtkomst till informationen lättillgängligt. Detta skapar då ett behov för ett gränssnitt som kan söka bland informationen. I detta arbete har det undersökts om en implementation av Vector Space Model ger mera relevanta resultat jämfört mot en enklare implementation som inte baseras på Vector Space Model. Sökningen utförs i en relationsdatabas med ett inverterat index, databasen fylls med data ifrån internetforumet Stack Overflow. Genom att bygga en sökmotor som returnerade två olika resultatlistor för varje sökning så fick tio användare testa och utvärdera resultatens relevans.

This paper presents a study of the Swedish public service television broadcaster - Sveriges Televisions (SVT) transfer pricing model. The aim of the thesis is to examine the motives for using transfer pricing from a theoretical perspective and if SVT?s transfer pricing model fulfils these motives. We will also examine any potential managerial problems the existing transfer-pricing model might cause and discuss how these could be solved. We have in our study found that the main motive for using transfer pricing within SVT is to allocate internal resources as efficiently as possible.

Asset management in insurance companies differs from conventional asset management to the extent that respect has to be taken to both assets and the commitments the insurance company has towards its customers. A model that has proven to fit well regarding the matching of assets and liabilities is the Asset Liability Management Model (ALM model). In addition to the matching in the balance sheet, the ALM model can be used in a company's work with strategic portfolio allocation by applying it as a basis for analyzing investment strategies with expected risk and return. From this, the ALM model also becomes relevant for calculating key figures according to the legal framework Solvens II which includes laws and regulations regarding the demands on economical strength (solvens) of insurance companies.Hence, the goal of this masters thesis has been to, on behalf of Bliwa Livförsäkring, create an ALM model to support the asset management department of Bliwa in their work with defining a credible way of analyzing the future risk and return of Bliwa's asset portfolio and insurance undertakings.The ALM model generally consist of four submodels, the scenario model, the liability model, the asset model and the company model, where the scenario model often is named as the core of the ALM model. The course of action has been to develop these submodels individually, with focus on the scenario model.

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

Packaging has had little impact in marketing literature. Research has focused on a single transaction approach. Lately researchers are looking at packages as a tool for brand building purposes. Thus, the focus is moving towards a multiple transaction approach, where packages can affect the consumer also after the purchase. For a range of goods extrinsic cues has been shown to have stronger effect on consumers' evaluation than intrinsic ones.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

This study examines retail atmospherics from a reality perspective. The topic "special exposure" has received research interest in the past but it has not been recognized as a critical consideration in the daily retail business. Too many retailers leave assortment decisions to thumb rules or trial and error. The highest aim of this study is in addressing that gap between theory and practice. To catch the attention of the customer is important in supermarkets because most grocery purchase decisions are made at the point of purchase.

User friendly and usable are two words that are often mentioned in the context of marketing new products. By doing so it adds an extra sense of quality to the product. The meaning of these words is therefore something that every product wants. But what is it that makes a product usable and user friendly? What methodology exists formaking sure that a product is usable? Does it exist applicable processes to ensure user centered development? These questions together with a practical example are parts of what will be addressed in this report.The thesis was carried out for C2 Management, a company that works with supporting other companies in their work with quality and constant improvements.

This Master Thesis has been carried out as a new product development project in collaborationwith G-Man Tools AB located in Edsbyn. The purpose of the project was to construct a newpruning saw there the blade is integrateble in the handle, thus a foldable pruning saw.The work has been performed on the occasion of G-Man Tools AB wanted to improve theirproduct range by creating a saw that complement their range of quality saws. They have a similarproduct today, but they do not manufacture this product by them selves and it is not directlytargeted against garden use, which is a disadvantage when it is one of their major markets.Even though almost the entire chain from the requirements of the users to drawings has beentaken into consideration, emphasizes has been put on generating ideas. However the first thingthat was carried out was to establish a productspecifikation from interviews with users and thecompany?s experience.

This paper aim to present a model for evaluating what we choose to call HTML-frameworks, a framework that contains a set of CSS layouts and occasionally JavaScript support, based on the characteristics of the software quality standard ISO/IEC 9126-1. The methods used to produce this model is based on a field study that involved making a web portal with the help of a HTML-framework, some relevant literature and an analysis of the framework based on the characteristics of the ISO/IEC 9126-1 standard. The result was a model based on twelve different characteristics; functionality, web browser compatibility, collaborative skills, user-friendliness, documentation, visuals, graphic layout, performance, activity, professional support, replaceability and license. This model should be viewed upon as a suggestion to what a model for choosing HTML-framework could look like, because we haven?t had the time to test it in a real situation, so further studies are needed, and we believe there could be improvements made in the objectivity of the assessments of the characteristics..