New innovation and technology have influenced the development of Product development processes and the four largest banks in Sweden have more or less been forced to adapt their products and services along new customer requirements. It may therefore be considered appropriate to involve customers in this process. This by collecting customer information and allow customers to influence the process to a greater extent. The payment solutions of Sweden?s largest banks' continue to evolve and to pay with electronic money has come to change banks' Product development processes of payment solutions.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the Product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The Product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Tourism has been an expanding market since the first travel agency started in the middle of the 18?Th century, and today it is a global industry, with intensified competition and high demands from the customers. Product development is therefore one of the most important aspects for successful companies, and scientists also agree that the first stages in Product development are the most critical. This essay is focusing on those stages, regarding Product development on travel agencies, and the research question is as follows: How are new tourism destinations developed and what is the difference in working process between small and big travel agencies? The empirical research consists of qualitative semi-structured interviews with two big and two small travel agencies.

This thesis presents an application that performs positioning of modules automatically based on given data for every module, and the development of it. The basis of the application is from a previous thesis code. On top of that code, more features and error handling has been added, as well as fixes for various bugs. A stress test has been performed and further development possibilities are being presented.The thesis work was carried out at Toyota Material Handling Mjölby (TMH) and was made in parallel with another thesis by Fredrik Holden who was generating data for the application. For a complete understanding of the theory and background, please also read Holden?s thesis report ?Development of method for automated positioning of 3D-representations of a modularized product?, as well as the former thesis  ?Analysis for Automated Positioning of 3D-representation of a Modularized product??..

Product development is a risky business; many products never yield profit, but it is also ne-cessary for a company?s survival in a competitive business where the costumers change their requests constantly. Consumer-led Product development is developed from the wish to fill the consumer?s needs and expectations and thereby be more likely to succeed. Lindell?s Gårdsslakteri AB is a local slaughter and meat processor in Västergötland.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

The object for this study is a company developing and manufacturing vehicles for heavy transportation. The company distributes their products on a global market. Therefore the company is required to have efficient internal production development processes in order to successfully beat the competition. The purpose of this master thesis is to study how this particular company intends to implement their standardized theoretical Product development process within their organization and how well it is done. We intend to identify and specify if the process has any unexploited capacity.

In today?s competitive market, design is an important element for the companies. They must succeed with delivering an increased value and an experience for the consumer to be able to survive. The Swedish company?s have become better in the design area, the higher standards the consumer?s demands forces the company to invest more in design.

Project Safe Sleeping Position (SSP) contains all parts in a Product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

Due to a growing interest in communication in today?s society the demand for equipment that is used in communication networks increases while the competition between companies that produce this equipment grows. To meet the increasing demand and at the same time having a competitive Product development many companies use some effective product design, such as the modular product design. When a modular product design is used it?s good to compare different module configurations for a certain product and to simplify these comparisons some tool can be used.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global Product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the Product development process was studied inorder to compare it with a Product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

The technological progress of the world has had a massive effect on how we communicate with one and other, it also has had an big impact on how companies communicate with their customers and consumers. Today you cannot only communicate a ?promise to your costumers and consumers you also have to ?deliver? what it is you promise. Strategic communication is today not only to market your product but to ensure that your strategic communication is shown even in you innovation, design and Product development.  This thesis is conducted in collaboration with No Picnic AB.The purpose of this study was to get an insight in how Swedish companies use their strategic communication. We aim on bringing a new point of view of strategic communication with innovation, design and Product development also as a communication channel.

Product development cycles become shorter and shorter. The time from idea to market has become an important competitive factor. Despite this, methods used for making the Product development process faster are surrounded with uncertainty about their efficiency. The purpose of the thesis is to describe the pros and cons of ?best practice? methods for shortening lead times and how these methods effect the lead times in research and development.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

The number of locals in Stockholm who chooses the bike in front of public transport has increased significantly in recent years. The product purchaser of this project, Joakim Victorin at Sigma AB, has a keen interest in cycling, which resulted in a fairly obvious topic of this project; through a web application Sigma AB wanted to make it possible to handle results from professional as well as amateur competitions in cycling.The purpose of this web application is to simplify reporting and handling of competition for both small and bigger bicycle races. By providing the users of the system a platform independent client, any available device may be used.This thesis has followed the development principles which prevail on the ASP .NET MVC 3 concept. When developing the system the Microsoft Visual Studio 2010 development environment was used. The framework and the pattern of ASP .NET MVC 3 is a prominent part of today?s web development.