Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

The aim of this report is to give the reader insight into the development of theweb-based accounting application SuperBooky. Accounting is a complex task thatmany beginner entrepreneurs struggle with. The development of this application wastherefore focused on making accounting as convenient and as easy as possible. Theend product targets small enterprises and its functionality was designed with this inmind.To make sure that the application was designed in a user-friendly way, polls werecarried out among individuals with basic accounting knowledge. These polls werethen used as a basis when the application was under development, to ensure that itwas well-suited to the target audience.This project was carried out as a bachelor?s thesis for Chalmers University of Technologyand University of Gothenburg during Spring 2015.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

ABSTRACT The potato has had an important role in the Swedish dietary customs for quite some time. However, during the last forty years, consumption has decreased from 87 kg/year and person to 46 kg/year and person. Other products such as pasta, rice and bulgur are competing with the potato. Many of the competitors have been developed and refined while the potato has not changed much. The potato is still a bulk product while competing products have been differentiated. Stakeholders within the potato market has realized that something has to be done and today there are a number of organizations and networks that all actively work to preserve the Swedish agriculture and specifically the potato as a product. The purpose with this essay is to examine how store managers in the Swedish grocery stores view the handling of the potato in the store, the quality and packaging, marketing and future consumption.

This paper aims to investigate whether a small organization with small development teams can find a value in leaving a functioning development process to follow a formal systems development methodology, if these organizations can find support in an agile systems development method and in such case the method needs to be adjusted according to the organizations unique conditions.A traditional plan-driven system development methodology includes a number of phases that are carried out sequentially and a completed phase can basically not be resumed. All requirements are specified at the beginning of a project and at the end of the project only one delivery of software take place. This can cause difficulties in for example dealing with changing requirements. Agile system development methods intend to deal with changing requirements and to enable continuous delivery of valuable, working software.In this paper, both the traditional plan-driven methods and agile methods will be explained. Research methodology and existing system development theories will be discussed and a company where the study has been conducted will be presented.

Changes in the climate and the environment are largely consequences of human influences. Resources are given to teach adults about the environment. However, there are problems in focusing on adults because it is difficult to influence people when they already have created a lifestyle. We have instead chosen to focus on teaching children about changes in the climate and the consequences of this.Many of the toys available on the market today encourage children to consume. Luxury cars and dolls with hundreds of accessories are often made of materials that has have a negative effect on the environment.Another problem we often encountered during the year is the declining interest in technology and science.

Författarna har haft ett samarbete med Panduro Hobby i samband med deras årliga miljökampanj. Syftet med examensarbetet har varit att med hjälp av befintliga produktutvecklingsprocesser och livscykelanalyser (LCA) ta fram en hållbar textil produkt med växtfärgning. Tanken var att konsumenter sedan själva skall kunna ta fram och växtfärga denna hållbara textilprodukt. Miljömedvetenhet och hållbarhet inom textilindustrin är ett aktuellt ämne. Trots det saknar dagens konsumenter förståelse för textilindustrins påverkan på miljön och har bristande kunskap om textila material för att kunna göra miljövänliga val ute i handeln.

In which ways have composing processes in music appeared over the past 300 years? How may composing processes work today? What does new technology do to this processes?The key purpose of this study is to investigate various composing processes. A further purpose is also to gain an awareness of how we use modern technology by computers and their notation programmes.The research design of this thesis includes a display of literature related to composing processes. along with an analysis of the writer?s own experiences in the area.

Society and technology develop together in interaction processes. Because of the development of information technology, the Industrial society has been left behind in favor of a society where information is the key production factor, i.e. the Information society. In the Information society, social functions and processes are organized in networks. These networks integrate geographically separate markets to parts of a complex global economic system.

Denna uppsats behandlar första fasen i produktutvecklingsprocessen, det vill säga Fuzzy Front End (FFE). FFE är perioden från att det finns en möjlig idé och företaget anser att den är värd att utforska ytterligare, till dess att idén är godkänd och företaget är redo för att börja utveckla samt investera i projektet. I litteraturen anses denna fas som kritisk därför att den är problematisk samt avgörande för företagets fortsatta aktiviteter inom FFE. Forskningen har visat att det finns ett samband, att om företaget effektiviserar FFE bidrar det till framgång för den nya produkten. Det finns liten förståelse vad som verkligen försiggår i FFE fasen och i denna Litteratur Review har 12 stycken teman identifieras för att redogöra för FFE.

Our examination project has been to develop today?s existing walking frames and make them more exiting and user friendly for tomorrow?s users.The use of a walking frame today makes it easier for a person with a movement difficulty in different extent. It makes it easier with their living condition and the user get a more movement easier life where they can take care of the daily chores without any help from the society or the family members.With our product we get a product that not only makes it easier for the user to get out and get forward. We help the user to get forward where they often would have difficulties to get forward. An example is where its more steeper parts where it could be more difficult to get up or down and even with more difficult foundation due to bad weather.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This study is based on the development of a new software, which is used as a recommendationtool for selecting the best product. As part of the software development has an external partnerbeen asked to assist. The report will process the expectations that different people have on anew project but also how information is communicated to an external partner.The results from this study show that a software's function is closely linked to its usability.Therefore shall usability been taken into account when a new resource is created. The study alsoshows the importance of being able to share information, on how the program will beconstituted, to someone outside the organization..

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.