The main purpose in this degree thesis is to investigate changes in performance when introducing a newly produced Real-Time database in one of CC Systems products, the Diagnostic Runtime Engine, DRE. The thesis is a collaboration between CC Systems, creator of DRE, and Mimer AB, developer of the Real-Time database.The result reveals that the time spent on database access is considerably lesscompared to the originally used database. The research has lead to several additional requirements on the real-time database and these are presented as part of the result in this thesis. The additional features will help making the product more suitable for DRE and similar applications.Additional research is required to be able to recommend the use of this product or not. Primarily the performance in another operating system, Windows CE, but also the introduction of additional features should be investigated.

Transcending sound design is possible. There are unseen possibilities and a great potential for improvement and development in sound and music design ? but there is a great difficulty penetrating the obstacles that lies in the way for such development to take place and to exist. The difficulties in being negotiable and productive lies more within the limits of the audience it has to gain, than in itself. It is as though music and sound design has to evolve very slowly, in an almost evolutionary style; one step at a time, to be accepted.

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.

'Hir in the box' is a study about the gender perspective in packaging design and how it is today. The study deals with the product category razors, for both women and men, to examine and compare products with the same function but with different designs. Based on an analysis of how packages are designed for different sexes, information should be given on how gender-neutral packaging can be designed and used in the future to reach the market. The purpose of the study is also to contribute to future research on the subject. To fulfill the purpose of this study, nuanced and in-depth data is collected by means of a small-N-study and a qualitative study in the form of open group interviews where the survey units are reviewed and discussed.

In 1993 the internal market within the European Union was formed and ensured free movement of goods, services, capital and people. This led to the removal of trade barriers between members of the European Union. When opening up for competition, price differences between countries decreased and more jobs were created. A single currency was introduced by eleven countries in 1999 with the goal of reducing transaction costs, eliminating exchange rate risk and to further simplify trade. In 2001 Greece joined the collaboration and introduced the euro.

A degree project has been carried out at Motion Control, Västerås. The degreeproject ?Grafisk Skärm för Inbyggda System? have developed a first prototype of anembedded system with a display, a graphical user interface with touchscreen andpossibilities to communicate with external units.The work initiated with surveys of critical components. A technical specification forthe desired end product was developed. With the technical specification as support,design specifications for hardware and firmware were developed.After the specifications were done, a circuit diagram was developed and a circuitboard was made.

The following report comprises my bachelor´s thesis in Industrial design, 30 hp. It is executed in collaboration with Bonum senior housing, who has been the client and assignment- maker of this project.The goal was to design a bench for their entrances, which could represent not only the needs of the target group but also Bonum as a trademark. The work is done with great care for both human kind and the environment, with sustainability as beacon.The design process has been followed.Initially, you will find the definition of a bench for entrances, the framework including inclusive as well as sustainable design, a function- and market analysis followed by the inspiration part of the project. Getting to know the target group and their specific needs has been essential for this work.Investigations about what senior house living and senior products are and what the target group thinks and feels, has been done. As a result, two ?personas? has been developed.With the help of a purposely chosen group of people, surveys and ergonomic studies has been executed, as well as prototype-testing.The fact-finding has formed the stable and unavoidable foundation of this project, which later on gets more creative and idea based.

In an ever more competitive environment Sandvik Materials Technology,SMT, runs a large-scale program to improve their processes for product development.The purpose with the program is to increase the company?s profitability by increasingthe number of new products in their product portfolio. The strategies SMT is usingfor reaching their goals are to change the way they work with product development byreducing lead time and learning how to prioritize products with the highestprofitability. In the R & D Department the work of improvement pursue by adaptingLean R & D to their way of working. Lean R & D encourages working withcontinuous improvements and eliminating waste.The main purpose for this Master?s Thesis is to develop didactic support to make iteasier to implement Lean in SMT R & D department.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lack of a sauna lightning produced by Tylö. The project of developing a new sauna lightning series was assigned two students at the developmentengineering program at Halmstad University. The main problem with lightning in the sauna is the heat and security aspect. The selection fell on LED technology as the lightning source, thanks to its small measures and low heat emission. The work of constructing of a lightning armature which the capability of cooling down the LED lightning was carried out during autumn ?06 and spring ?07.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lackof a sauna lightning produced by Tylö. The project of developing a new saunalightning series was assigned two students at the developmentengineeringprogram at Halmstad University. The main problem with lightning in the saunais the heat and security aspect. The selection fell on LED technology as thelightning source, thanks to its small measures and low heat emission.The work of constructing of a lightning armature which the capability of coolingdown the LED lightning was carried out during autumn ?06 and spring ?07.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

Graphic design is an integrated part of the public spaces we move through in our daily lives. This thesis explores the emotional aspects of graphic design, with a focus on environmental graphics for the public space. The goal is to find ways in which the emotional aspects of a design solution can be varied without compromising the practical aspects, i.e. affect the conveyance of information. This goal is pursued through an analysis of historical and contemporary literature as well as by design practise.

New technologies and new consumer behaviors are having a large impact on mediacompanies. The biggest change is in the behavior of the younger demographic whereold platforms like television are abandoned for new online platforms. In this newworld, media companies and organizations need new tools and business models tostay competitive. One such tool is Design Thinking, a term used to describe a cognitivedesign-specific set of activities used during a design process. It has been popularizedin commercial areas and there the term is used to describe an applicable workflowused to promote the skills required to use Design Thinking.

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

The author contacted designers Claesson Koivisto Rune Arkitektkontor in August 2007regarding his Master thesis at KTH. The company had discussed the possibility of creating achair made from molded pulp. The author was taken on as a manager for the project. Theobjective was to produce design documentation for a paper pulp chair which was to belaunched at the in 2008 Milan Furniture Fair. The purpose of the thesis was to develop aproduct with scientific methods as well as to investigate how to make collaboration betweendesigners and engineers easier through communication.The project went through four basic stages: Information, Analysis, Synthesis and Evaluation.Information on paper pulp, molded pulp, chair design, sitting postures and the existingmarket of molded pulp furniture.