This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

Purpose: The purpose of this study is to examine how a company with a single brand is perceived as uniform, as well as how they use internal brand building to reconcile various competing actors within one brand. Furthermore the aim is to examine how staff, through internal brand building processes, perceives and identifies themself with the values of the common brand. Method: A case study with method triangulation was conducted at Nordiska Kompaniet department store in Stockholm. Quantitative data through a questionnaire survey with employees combined with two observations. Qualitative data was given through an email interview with a responsible manager of digital channels and PR from NK AB.Theories: This study has used the following theories; Destination marketing, Corporate brand, internal branding, corporate identity, corporate culture, brand value, service brand values, brand citizenship behaviour.Conclusion: This case study of NK has shown that internal branding building in a department store is a comprehensive work, which all involved must have a unified perception and understanding of the brand, in order to successful unite under one brand.

The aiming with this project is to find out if a small scale chicken production can be profitable, from day-old chicks to a processed smoked product out to stores and consumers. The products will not be available in the stores all the time because we will give the customers quality rather than quantity, so when the product can?t be found in the stores the customers will ask for it. The conclusion I found out is that it might be hard to raise chickens in these scale from an economic point of view the costs for transport, logistics, slaughter and marketing are to high..

This work describes the process from sketch to functional textile. Starting points are thoughts about the transition from sketch to fabric, and the possibility to sketch before decisions are made about the quality of the final fabric. The first result of this study is the final product, a hand weaved clothing in thin wool that fulfils set demands. The second result is the knowledge that it is possible to make a purposeful sketch without knowing the final product..

The topic of this thesis interest is the relation between branding as a place making/marketing technology and the process of regionalization. The main proposition advocated is that the officially communicated image of the Øresund Region, as a cohesive place and community, is a space that has been configured with branding and can be described as a territorial simulation. The concept of territorial simulation consists of two conjoined terms: simulation which aim at explaining the idiosyncratic brand image, as a social formation, which does not represent the place it imitates but commoditise it; and territorial which seeks to visualize the process of the unfolding of this image as a territory. The main argument is made in the third chapter, which traces the process of actualization of the brand image as a territory: ?Øresund?.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

Syftet med uppsatsen är att undersöka de attityder som svenska och finländska konsumenter har beträffande ursprungslandsinformation, i synnerhet bilden av PIIGS-länderna. Teorierna i uppsatsen utgår ifrån Country of origin och dess effekter samt från tidigare forskning.Uppsatsen har en kvantitativ ansats där en enkätundersökning och statistiska beräkningar utförts. Slutsatserna i denna uppsats är att de svenska och finländska konsumenterna generellt inte tar hänsyn till ursprungslandsinformation. De påvisar även negativa attityder gentemotPIIGS-länderna gällande tillförlitlighet och produktkvalité i jämförelse med deras hemländer..

Denna studies syfte a?r att underso?ka vilka aspekter av ett fo?retags arbetsgivarvaruma?rke som va?rderas ho?gst av arbetsso?kande och da?rfo?r a?r viktigast fo?r fo?retag att kommunicera till ma?lgruppen genom employer branding-arbete. Uppsatsen bygger pa? fyra fra?gesta?llningar: Vilka av aspekterna i ett arbetsgivarvaruma?rke a?r viktigast att kommunicera till arbetsso?kande fo?r att bli en arbetsgivare som arbetsso?kande dras till? Vidare: Vilka aspekter av ett arbetsgivarvaruma?rke va?rderar studenter ho?gst na?r de va?ljer arbetsgivare? Finns det en skillnad mellan ma?n och kvinnor i vad man va?rderar ho?gst respektive la?gst? Finns det en skillnad mellan vad man va?rderar ho?gst respektive la?gst beroende pa? studietid?Underso?kningen baseras pa? en kvantitativ studie och genomfo?rdes med hja?lp av en enka?tstudie. Enka?tstudien baseras pa? en modell fo?r corporate social performance som kommer fra?n ett offentligt index av Kinder, Lydenberg, Domini & Co.

The aim of this thesis is to investigate the local debate on the Music library in Västervik to see what arguments, pro et contra, that constitutes it. Since its opening the Music library has faced regular threats of being closed down. This is an issue interesting due to several factors, its lack of guaranteed public funding and relative importance to Västervik´s attempts at city branding being two. Using argument analysis, the thesis proposes that the local debate shows traces of both instrumental and culture centered, intrinsical views of the Music library, and that the instrumental view holds both negative and positive poles of opinion while the intrinsical counterpart is one-sidedly positive. Further, the thesis argues that this is in line with a long since documented shift in cultural politics towards a more market oriented discourse..

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

This study examines retail atmospherics from a reality perspective. The topic "special exposure" has received research interest in the past but it has not been recognized as a critical consideration in the daily retail business. Too many retailers leave assortment decisions to thumb rules or trial and error. The highest aim of this study is in addressing that gap between theory and practice. To catch the attention of the customer is important in supermarkets because most grocery purchase decisions are made at the point of purchase.

First objective: To bring forward managers? perceptions of the underserved consumers in emerging markets. Second objective: To reveal what implications managers? perceptions of underserved consumers in emerging markets provide for branding in these markets. Our study indicates that managers? perceptions are still lacking consumer insights within five elements (value, loyalty, purchasing power, consumers and consumption).

User friendly and usable are two words that are often mentioned in the context of marketing new products. By doing so it adds an extra sense of quality to the product. The meaning of these words is therefore something that every product wants. But what is it that makes a product usable and user friendly? What methodology exists formaking sure that a product is usable? Does it exist applicable processes to ensure user centered development? These questions together with a practical example are parts of what will be addressed in this report.The thesis was carried out for C2 Management, a company that works with supporting other companies in their work with quality and constant improvements.