An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

In this report two Sustainability Life Cycle Assessments are carried out for two types of tiles for Riksbyggen, to contribute to a sustainable urban transition. Sustainability Life Cycle Assessment involves performing a life cycle assessment based on four principles based on scientific research and presented by the non- governmental, non-profit organization, The Natural Step. The principles concern raw materials, chemically produced substances, degeneration of nature and social conditions.Origin of products, manufacturing sites and manufacturing procedures were initially completely unknown and much of the work has consisted of finding the entire cycles, understand manufacturing processes of ceramic tiles and evaluating what materials and what type of energy sources that are required for the production. A socially sustainable perspective has been of high relevance alongside an ecologically sustainable perspective.The report begins with the basic underlying facts and the purposes of this investigation and that the reasons why Sustainability Life Cycle Assessments are carried out are to provide Riksbyggen and the own workers with documents presenting Riksbyggens ideas regarding sustainability and to hopefully get the ideas further down in the supply chain. The methods used to fulfill the investigation are presented and scientific facts about LCA and ceramic building materials are reviewed.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

New Economy Firms (NEFs) are considered being important drivers of economic development and growth in Sweden. Also, entrepreneurship is a widely discussed topic that is considered being essential for firms that are making business in a fast moving landscape. Usually, the growth of companies is put in context of the life cycle. The life cycle further implies that as a company moves from the startup-stage along the curve, the organizational structure increases. Further, increased structure is claimed to impede the entrepreneurial culture within the firm.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

Project Safe Sleeping Position (SSP) contains all parts in a product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Detta arbete behandlar problemområdet systemförvaltning och är en vidareutveckling av förvaltningsmodellen vid systemförvaltningsprocessen. Vid systemförvaltningsarbetet finns det olika förvaltningsmodeller som kan vara ett stöd vid taktisk och operativ styrning samt administrativ kontroll.Systemförvaltningsmodellen består generellt av sju olika rekommenderade delmodeller där bland annat systemförvaltningsprocessen ingår. Modeller för systemförvaltningsprocessen bör förenkla, effektivisera och ge stöd när systemförfrågningar samt systemkrav inkommer från verksamhetsledningen eller systemanvändaren. Undersökningen i detta examensarbete fokuserar på en vidareutveckling av modellen Application Maintenace Cycle (AM/Cycle) som utvecklats av Peder Brandt.Vidareutvecklingen i detta arbete resulterar i en modell för systemförvaltningsprocessen, vilken benämns Application Maintenace Schedule Cycle (AMS/Cycle). Litteraturstudier och intervjuer har påvisat vissa svagheter med modellen AM/Cycle, vilket tagits i beaktande vid vidareutvecklingen av AMS/Cycle.

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

This thesis has been done at the Unversity of Örebro for Örebro University Hospital (USÖ). In our work we have developed a product for hearing tests to determine hearing thresholds of small children. Our product contains software and a control surface for controlling two separate screens. One of the demands was that our software could handle big file libraries. Reliability and simplicity were essential for the user.In our work we have utilized programming of both microcontrollers and Windows software.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.