Ett mönster är uppbyggt av ett motiv som upprepas. Denna upprepning kan fortsätta i all oändlighet. Hållbar antyder långsiktighet. Mönstrets övergripande egenskap är oändlighet. Hur kan denna egenskap hos mönstret nyttjas inom mönsterdesign för att främja hållbar utveckling? Det här kandidatarbetet undersöker mönsterdesignens möjlighet att verka för hållbar utveckling genom att se till begreppet mönster ur ett bredare perspektiv, samt i relation till design för hållbar utveckling.

In this work a new design for S:t Erik?s square in Uppsala is being proposed. The square is situated in the middle of the city, surrounded by historical buildings. Today the square is a parking lot. The aim of the design proposal is to promote life and activity of pedestrians and cyclists.

E-commerce is becoming more common in Sweden and many Swedes buy clothing and sporting goods online. Online fashion retailers offer a visually pleasing range of products, which places greater emphasis on the aesthetic design of the online retailer. This paper examines how the perceived credibility of an online fashion retailer is influenced by the aesthetic design through a first impression. This study was conducted through ten interviews where the informants observed, assessed, and then discussed the online fashion retailers that were used in this study. Results show that recognition of an aesthetic design and a perception of usability and professionalism affects the perceived credibility in a positive way.

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

Uppsatsen är ett examensarbete på 15 hp inom produktdesignprogrammet på Malmö högskola. Projektet hanterar blöjors utformning med ett resulterande förslag på hur denna produkt kan förbättras, med en fördjupning inom hållbar utveckling. Resultatet blev en blöja med inlägg, för den mer omedvetna konsumenten, som minskar antalet byten och därmed mängden miljöpåfrestande material som behöver tillverkas och slängas I fördjupningen intervjuades Olof Kolte, framträdande industridesigner som verkar inom hållbar utveckling, och en litteratursökning på området utfördes. Förundersökningen angående blöjor baserades främst på kvalitativa intervjuer, och konceptualiseringen baserades främst på ett antal brainstorms och en metod som kallas bakåtmetoden, utvecklad av Edward de Bono, författare och konsult inom lateralt tänkande..

I dagsläget är det svårt för företag att behålla en stark marknadsposition och utmaningen ligger dels i att regelbundet presentera nya produkter på marknaden och ständigt skapa nya innovationer. Genom att använda sig av Lean Product Development i produktutvecklingsprocessen kan företagen anta utmaningen. Det kan dock vara svårare för små och medelstora företag då de kan ha begränsade resurser. Syftet med denna studie var därför att ta fram en projektmodell för produktutvecklingsprojekt i små och medelstora företag. Studien bygger på kvalitativa forskningsmetoder där sekundärdata samlades in genom både bibliotekskatalogen vid Mittuniversitetet och sökningar i forskningsdatabaser på Internet.

This is a bachelor thesis that studies and discuss the question: How can we develop our individual narrative technique with sound design in a Swedish drama production? We have done research and empirical studies. We have analyzed movies to get an idea how we use the sound design in Swedish drama productions today. We have produced a movie that gives sound the biggest part. Key words: Swedish drama production, narrative technique, sound design.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

Dagdrömmar är en tapetkollektion bestående av tre fondtapeter som kombinerar det moderna, massproducerade digitaltrycket med traditionell, unik broderiteknik. Genom att tillföra handbroderi och dess struktur och textila känsla till ett digitaltryckt tapetmaterial skapas en kollektion som befinner sig i gränslandet mellan design och konst, lyx och budget samt dröm och verklighet.Daydreams is a wallpaper collection consisting of three images that combines the modern, mass-produced digital printing techniques with traditional, unique needlework. By applying embroidery ? with its structure and fabric texture ? to a digitally printed wallpaper material, a collection is created that lingers on the borders between art and design, luxury and modesty as well as dream and reality..

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

När företag ska utveckla produkter och tjänster behöver de informationsunderlag om kunder och användare. Traditionella marknadsundersökningar kräver ett rationellt förhållningssätt och avslöjar åsikter och attityder, men uppvisar brister när det kommer till att upptäcka omedvetna behov hos användare. Lösningen på denna problematik är att observera användare i deras egen kontext, ett tillvägagångssätt som är vanligt bland industridesigners.Syftet med studien var att jämföra hur industridesigners och marknadsförare arbetar för att samla in information om användare i samband med produkt- och tjänsteutveckling. Därefter syftade studien till att ställa dessa likheter och skillnader i kontrast till tre teorier: Marketing Research Process, Design Thinking samt Empathic Design. Tre intervjuer genomfördes med tre olika företag: ett industridesignföretag, ett marknadsundersökningsföretag samt ett tjänstedesignföretag.Studien resulterade i ett antal slutsatser.