This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

This study examines retail atmospherics from a reality perspective. The topic "special exposure" has received research interest in the past but it has not been recognized as a critical consideration in the daily retail business. Too many retailers leave assortment decisions to thumb rules or trial and error. The highest aim of this study is in addressing that gap between theory and practice. To catch the attention of the customer is important in supermarkets because most grocery purchase decisions are made at the point of purchase.

In recent years, the penetration of new players on the telecom market hasdrastically increased the work pace, affecting both design and production. Inthis report the technical and economical potential of a DC/DC converterplatform is investigated, in order to shorten the time of the design process.This is done in comparison with the present discrete type designs. PowerIntegrations offers a product, the DPA-Switch?, enabling this.By developing a wide DC/DC converter platform based on the DPA-Switch?,many advantages are gained. The component count is decreased by up to48 % and the yield increases by up to 2.9 % which in all yields a costreduction by up to 43 % or ?390 000 for 100 000 manufactured units.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

User friendly and usable are two words that are often mentioned in the context of marketing new products. By doing so it adds an extra sense of quality to the product. The meaning of these words is therefore something that every product wants. But what is it that makes a product usable and user friendly? What methodology exists formaking sure that a product is usable? Does it exist applicable processes to ensure user centered development? These questions together with a practical example are parts of what will be addressed in this report.The thesis was carried out for C2 Management, a company that works with supporting other companies in their work with quality and constant improvements.

?Nästa generations ryggskydd? är ett examensarbete vid Innovations- och designingenjörsprogrammet på Karlstads Universitet. Uppdragsgivaren är Stefan Ytterborn på POC Sweden i Stockholm.POC är ett företag som satsar på att utveckla ny och effektiv skyddsutrustning till alpinskidåkare för att förhindra allvarliga skador. Då utrustningen och åkstilen ständigt blir mer extrem måste även skyddsutrustningen utvecklas för att ge så bra och smidigt skydd som möjligt.Uppdraget har gått ut på att ta fram en produkt eller metod som skyddar ryggen vid alpin skidåkning. Denna problemformulering har varit väldigt öppen och gett en hel del spelrum vid idégenerering och produktframtagning.Examensarbetet resulterade i en produkt som skyddar ryggen mot den nuförtiden mer frekventa skadeformen, kompressionsskador.

?Nästa generations ryggskydd? är ett examensarbete vid Innovations- och designingenjörsprogrammet på Karlstads Universitet. Uppdragsgivaren är Stefan Ytterborn på POC Sweden i Stockholm.POC är ett företag som satsar på att utveckla ny och effektiv skyddsutrustning till alpinskidåkare för att förhindra allvarliga skador. Då utrustningen och åkstilen ständigt blir mer extrem måste även skyddsutrustningen utvecklas för att ge så bra och smidigt skydd som möjligt.Uppdraget har gått ut på att ta fram en produkt eller metod som skyddar ryggen vid alpin skidåkning. Denna problemformulering har varit väldigt öppen och gett en hel del spelrum vid idégenerering och produktframtagning.Examensarbetet resulterade i en produkt som skyddar ryggen mot den nuförtiden mer frekventa skadeformen, kompressionsskador.

Detta examensarbete har haft till syfte att åskådliggöra eventuella skillnader och/eller likheter i den upplevda användbarheten vid användandet av en webbplats skapad via mobile first design och desktop first design. Målsättningen med examensarbetet har varit att ta fram en hifi-prototyp, skapad utifrån mobile first design, som visualiserade ett designförslag för flygfotoföretaget HimlaFotos startsida. Jämförelsen har utgått ifrån en egendefinierad version av begreppet användbarhet baserad på ISO:s definition, där användbarhet består av tre faktorer; kraftfullhet, effektivitet och tillfredställelse. För att samla in data om den upplevda användbarheten har användartester genomförts. Flera likheter har identifierats gällande användbarhetsmåtten kraftfullhet och effektivitet, medan skillnader har funnits vid måttet för tillfredställelse.

This report describes the results of the project "Concept development of jet engine inspection plugs" carried out in the spring of 2008. The work was done at the department of product definition at the company Volvo Aero in Trollhättan. The objective of the work was to develop concepts for a "Volvo-unique" inspection plug. The work is part of Volvo Aero's focus on proprietary (self-developed) technologies. Inspection plugs can be found on virtually all aircraft engines and gas turbines.

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

This candidate report describes how a group of students can develop a smartphone applicationwithout any prior knowledge in the field. To make the project more realistic there is also a clientwho has requests and wishes regarding the finished product.The document describes the methods used to produce the application and also includesexperiences that the group gained. How the interaction with the client has been performed togain a good understanding of what they wished the product to become is also accounted for.The research questions focus on how the development has proceeded and how one can learnsomething new in a relatively short timespan as a group..

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

This essay discusses the legal and economic functions of the trademark and furthermore the degeneration of trademarks. These two concepts are strongly connected as the primary function of the trademark is the ability to separate the proprietor of the trademark?s product from the competitors´ products. The ability to separate is the basic condition for receiving legal protection. Through degeneration the trademark loses this ability to separate the product and becomes a generic term for the category of the product.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.