The Swedish government have a goal that wind turbines shall produce 30 TWh by the year 2020, compared to about 3,5 TWh produced in Sweden during 2010. To minimize the disturbance that wind turbines create the Swedish Environmental Protection Agency has stated a guideline value that noise from wind turbines at nearby residents shouldn?t exceed 40 dBA, at 8 m/s wind speed. With advanced calculation models, like Nord 2000, the emitted sound from future wind turbines can be calculated at an early stage to optimize the power production without exceeding the 40 dBA. When the turbines have been built there is a need to verify that they really are within the guideline.

To work with environments outdoors for people, animals and plants is the main topic for the landscapearchitect. On several occasions the work is about public places that is to be in relation with other parts of the town. It is about the activities and the life that take place. The physical environment and the interpretation of it gives possibilities or obstructions for people who moves around or spend time in it.Since public places, parks and places for movement are used in daily life they strongly effect the people who use the places. The concequences of this effect can be positive or negative experiences.A positive example is a passage over a brook on the way to school while a negative one is to be afraid while passing a tunnel when it is dark outside. Other examples of concequences are stress effect from traffic noice or calming environments with twitter of birds. The physical environment is also a part of the total interpretation of a town.

Since the Bruntlandreport was published 1987, companies have shown their environmental commitment through an environmental account. Companies started these accounts because their rivals started having them and today most large companies have a environmental account or sustainable development report. The information given by the companies have been seen as slanted, and others see it only as a part of the image production for the companies. There have been several investigations of the stakeholders of environmental reports and it is not clear who is the primary stakeholder, in other words who actually reads them. All different stakeholders have different views of what an environmental account should encompass.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

Denna rapport beskriver ett examensarbete där optiska fibrer av plast integrerades i varpled i en väv. Syftet med examensarbetet var att undersöka om det är möjligt att industriellt producera ljusemitterande vävar med optiska fibrer. Arbetet delades upp i olika delar, både teoretiska och praktiska. Den teoretiska delen innebar informationssökning inom olika medier, såsom vetenskapliga artiklar och intervjuer med insatta människor inom de berörda områdena. Den praktiska delen i examensarbetet bestod av flera olika moment.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

Den svenska klädimporten har ökat dramatiskt och vårt samhälle har förändrats till ett konsumtionssamhälle där vi shoppar efter ?köp och släng? istället för ?slit och släng?. Den ökade klädkonsumtion är ett omdiskuterat samhällsproblem och mode är en färskvara som uppdateras i en allt snabbare takt. Ett stort utbud tillsammans med de låga priser som klädmarknaden är uppbyggd av uppmuntrar till impulsköp vilket gör det allt svårare för kunden att fatta medvetna köpbeslut. I denna studie kommer vi att utgå från Armstrong och Kotlers modell av köpbeslutprocessens som är uppbyggd av fem steg som innefattar hela processen.

The population growth and urbanisation in low-income countries bring issues of poor living standards and miserable sanitation conditions onto the agenda. If well-functioning waste management systems were developed, this could master some of the problems. The already existing local informal waste handling system that is common in many low-income countries, needs to be developed with proper sorting and composting solutions to decrease the environmental burden and improve the overall situation in the dense cities. This master?s thesis project is performed with the intention of developing functional decentralised waste management units in the city of Pune, India.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

The purpose of this study is to create a method that can be used to produce decision supportdata for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make long term projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal.

Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.

To succeed, and make money at your animal production you need to feed your animals with high quality fodder. Other condition to succeed is that you keep your production costs at a minimum. To be able to produce baled silage at a low cost it?s very important that the bales have a high density. Density is measured in kg dry matter (DM) per cubic meter. The purpose with this report was to learn more about making silage in round bales and to how much the bale density varies between different brands of round balers.

The transportation sector is the only sector of the Swedish society that is still increasing the emissions of carbon dioxide and other green house gases. Diesel fuel represents one of the fuels that contributes to these emissions and the use of diesel fuels is increasing every year. The main purpose of this study was to make an estimation of the current business situation for producers of liquid diesel biofuels in Sweden such as biodiesel, synthetic diesel and crude tall diesel and examine the forces of competition of the industry today and its future prospects. The study revealed that the rivalry among the existing firms was low mainly due to the geographical spread of the companies. Moreover the success of the biodiesel industry was influenced by a long-term guarantee of the tax exempt for biofuels and by the price level of petroleum diesel.

AbstractMycotoxins are secondary metabolites produced by filamentous fungi. Moulds producing mycotoxins grow on various crops that are used as horse feeds. Since the treatments of mycotoxin poisoned horses are limited it is important to prevent production of mycotoxins in feed. The major mycotoxin producing moulds in horse feeds are Fusarium spp., Penicillium spp. and Aspergillus spp.

Live-weight at different ages for Swedish Holsteins (SLB) and for the Swedish Red and White Breed (SRB), and the correlation to heart girth and height at withers. The aim of this investigation was to study the live-weight changes and mature weight for the Swedish Red and White Breed (SRB) and for Swedish Holsteins (SLB), and to estimate the correlations between body weight and body measurements such as heart girth and height at withers, respectively. The material used was from one of the experimental dairy herds (Jälla) of the Swedish University of Agricultural Science. It included recordings on 293 dairy cows with information from 7142 weight occasions and recordings on 275 dairy cows with information of 557 heart girth measurements and 560 measurements of height at withers. The registrations were done during 1993-2002. There was a large variation in live weight between cows in different ages and lactation stages.