Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a Processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

This thesis has been performed at International Aluminum Casting AB in Eskilstuna,Sweden.International Aluminum Casting is currently working with a number of improvementsin their production in order to achieve their vision of being the leading aluminum foundry in Sweden. As a step in their improvement efforts, focus was directed ondeveloping the company's fixtures for machining.Efforts were focused on two main objectives: to develop a complete proposal on afixture which leads to a more rational use of an assigned part and also form general design advice for development of fixtures in the future.During the work progress, discussions have been made with experts at International Aluminum Casting within the field of fixture design. The objective was to obtain sufficient knowledge about the underlying problems with the current fixture for the part. At this stage of the thesis, a number of essential criteria for fixture design were produced. Information and inspiration were obtained by examining the company?s currently developed fixtures.After gathering the necessary information the process of developing three different fixture concepts started.

The digital map product kNN-Sweden contains nationwide data of the country?s forest land. The estimated forest variables are mean age, mean tree height, volume per tree species and total volume. Today Södra Skog?s assessments of timber potentials are mainly based on experience rate and subjective assumptions.

Stora Enso Skog has a long term contract regarding felling rights and silvicultural activities on forest owned by Bergvik Skog. In the autumn 2006, Bergvik Skog proposed a new thinning program, ?Bergvikgallring?. The new program implied an increased focus on extraction of smaller trees compared to the present thinning program, Stora Enso Skog?s ?Kvalitetsgallring?.

The EU-project HEALTHGRAIN has suggested a new definition for whole grain which allows a small part of the grain to be removed during Processing. By removing the outer part or the grain the hygienic quality will increase but it is not clear how the taste and colour is affected. So therefore in this study three different debranning methods, peeling, pearling and polishing, which remove the outer parts of the grains have been used on common and durum wheat. The dietary fibre and ash content, as well as germination was analysed in untreated, peeled, pearled and polished grains. The decrease in dietary fibre and ash was higher in grains that had been pearled compared to those that had been peeled or polished.

The purpose of the study is to describe how financial management functions within the individual and family care services in three mid-sized municipalities.27 interviews with managers and key personnel at three management levels in Örebro, Växjö and Jönkö-ping were conducted using a descriptive approach and qualitative method. In addition governing docu-ments and delineations in regards to these municipalities have been studied.The combined findings show that all municipalities have separate visions and control systems/models for their municipality with focus on management by objectives and politically determined goals, which in-clude economical measurements and requirements for the departments. Moreover, are also tracking sys-tems, which are described as following up on the results thru indicators and/or measurable goals. The municipalities utilize framework financials and budget Processing on a high level and its timings appears similar in each municipality.Additionally the study has shown that there is a desire and aspiration to implement central economic goals in all three municipalities. The interviewees describe how they use their leadership to anchor, follow up and create participation in economic objectives and results thru instrumental and institutional leadership.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

The bioenergy market has been introduced relatively late in a perspective of the Swedish forestry. Nowadays branches and tops are used more frequently as bioenergy after harvesting. Therefore, it has developed a competitive situation between pulpwood and bioenergy. This situation has even established some questions. Two examples of these are: ? At what top diameter should the final piece of pulpwood be crosscut to get the best economically result? ? Should the top diameter, at the final piece of pulpwood, be crosscut at a thicker or smaller diameter than what is done today? The purpose of this report is to answer these two questions when the harvesting is made motor manually in beech stands.

Syftet med rapporten var att studera möjliga återvinningstekniker för Ragn-Sells. För detta användes litteratursökning och intervjuer. Återvinningstekniker som studerats är mekanisk bearbetning, mekanisk återvinning, kemisk återvinning och viskostillverkning. Flera underklasser till dessa metoder studerades också, liksom flera sätt att tillverka återvunna produkter. Rapporten nämner ett urval av återvinningstekniker och försöker inte nämna alla tillgängliga återvinningstekniker.Återvinningsteknikerna har sorterats enligt prioriteringen i EU:s återvinningsdirektiv (2008/98/EG).

In Sweden there are 354 000 private individuals owning forest. Of these forest owners there are at least two thirds that are self-employed, which means that about 215 000 forest owners conduct some kind of work in their own forest. Those numbers do not refer to firewood production, but every year 7.3 million piled cubic meters of firewood are used for heating Swedish households. This implies that many households are also producing firewood. The objective of this study was to assess and analyse the small-scale firewood production in the Umeå-region in terms of persons engaged in the work, equipment used, produced volumes and share of forest-owning households involved in these activities. According to results from a questionnaire, the average firewood producing person is a man between 40-60 years old.

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

The purpose of this study is to illustrate if structural factors to welfare indicators and the internal organisation of handle social assistance in combination with dominating ways of living with their values and norms can be used to explain why the costs of social assistance are low in Säffle township. The character of this study is exploratory, though important aspects in this case was unknown. The empiricism come from descriptive secondary statistics and from qualitative interwievs with three inhabitants in Säffle, whom are experts which means they know the township of Säffle and it´s inhabitants well. Säffle has been studied from four perspectives, of which the first two have a top- or macroperspective. In the study appears two divergent pictures.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.