Denna uppsats behandlar ämnet filöverföring i ett nätverk. Fokus för arbetet har varit att undersöka MTU:ns inverkan på överföringshastigheten vid filöverföringar baserat på vilket protokoll som används och storleken på filerna som överförs. I arbetet har ett flertal experiment genomförts som syftat till att utreda detta, samt att finna vilket protokoll som överlag presterar bäst baserat på omständigheterna för överföringen. Olika filöverföringsprotokoll, fildistributionsprotokoll, MTU:er samt filstorlekar har testats för att finna vad som resulterar i högst överföringshastighet vid filöverföring över ett Ethernetnätverk. Resultaten visar på att en hög MTU uppnår högst överföringshastighet vid överföring av stora filer, men att en standard-MTU fungerar bättre för att överföra mycket små filer..

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

AbstractThe ability to read and write is a very important skill in today?s information based society. Most of us learn how to read and write, but not everyone is blessed to do this without struggle. Dyslexia is a very common learning disability and therefore I found it interesting to study how teachers teach students with dyslexia.By studying the literature and by interviewing teachers, I found that dyslexia is a very complex disability. The teachers have to adapt their way of teaching in a way that a student with dyslexia can participate.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

Changing of the hoof angle is a common method for the treatment of many lameness-related conditions (Moyer 1980; Stashak 2002). Various studies in the literature have indicated different results of the effect of changing the hoof angle on the movement of the distal limb. Our study investigated the effect of raising the heel of the forelimbs by 10,7 mm on the movement of the distal limb. Horses trotted on a treadmill at several predetermined speeds. The kinematics of the distal limb was determined and variables including the extension of the fetlock joint were determined.

Development and accuracy tests of advanced exchange trading systems require well adjusted tools for testing. Aptness of these tools are probable to have a major impact on identification of bugs and verification of new functionality. Identifying erroneous parts and bottlenecks of the trading system is of outmost importance for the exchange as a whole since stability and correctness are two of the determinant factors its viability is measured by. This paper covers how this test-tool was created and the motivation behind the design choices made. The tool was created with the goal to be broad enough to cover the majority of cases that could arise, fast enough to be able to test the trading systems speed limitations (i.e.

The agriculture in Sweden today uses chemical substances to control vermin, weed and diseases. This usage shows through polluted subsoil water and trace elements in the food we eat. There?s a risk that additional symptoms will arise in the future. Our product Sha Jun, developed in 2006-2007, is an attempt to try and minimize the need of chemicals in the agriculture. The idea started with the attempt to minimize the usage of pesticides on the cropland.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

The purpose of this study was to examine how food managers of Östergötland County disucss around their possibilities of reaching the government´s orientation towards 25 per cent of the food - procured, prepared and cooked in the school meal - coming from certified organic production. The study was a cross-sectional study in wich a qualitative approach was used. The sample consisted six food managers in Östergötland. Data processing was done through a semantic content analysis.  The result showed that involvment and intrest were significant factors for the introduction of organic food in the school meal. The three municipalities with the highest percentage of organic food used the SMART - concept.

Several studies shows that dietary supplements do not have any proven effects on health, yet these supplements are increasing in sales. The study aims to find out what attitudes and knowledge people involved in physical activity have towards supplements and which factors influence them to buy supplements. How these factors differ between men and women was investigated. The study is based on answers from 100 collected questionnaires from people who are physically active at several gyms. Of those who participated in the study, 56 percent were men and 44 percent were women.

Palm oil has been used in processed food commodities since the 19th century. An increasing demand for regulating and ensuring a more sustainable palm oil production has resulted in various initiatives. However, these initiatives have received critique due to lack of compliance and insufficient revisions of palm oil plantations. The initiatives for creating an ethical, social and environmentally sustainable production are not sufficient for the Swedish industrial users of palm oil. As a result, stakeholders such as Swedish food processing companies, commit to ethical sourcing codes of conduct that go beyond the international palm oil initiatives.

On Ericsson Ltd in Borås a wireless communication system called MINI-LINK? is produced. In order to sell their product with the best possible quality guaranty, there is a signal processing circuit called ATLAS implemented in the system. This circuit would eventually be useful in the production and for the repairs of the radio units. Our commission was to examine the possibility for this use.

The life cycle of the anadromous Atlantic salmon (Salmo salar) can span large geographic, political, and socio-economic boundaries. Management strategies and regulations that only concentrate on small spatial scales often overlook larger basin-wide problems, especially relating to post-spawn seaward migration. In this master thesis one entire migration cycle of wild adult Atlantic salmon in the unregulated northern Swedish river Vindelälven was monitored by radio-telemetry tracking during upstream spawning migration and downstream seaward migration back to the Baltic Sea. The effect of ladder passage variables (time to pass, total time in the ladder, passage day over the ladder) at a fish ladder downstream in the river Umeälven, as well as fish size, were evaluated to determine if differences in upstream migration distance in the river Vindelälven could be observed. Ladder passage variables did not affect migration distance, but size exhibited a negative relationship to migration distance.

The result of this master thesis report describes the advantages and the drawbacks that will arise when implementing an Ethernet based intercommunication system in military vehicles. The report presents a possible solution and describes how different sound applications will be implemented into the suggested solution. The report show that IP LAN in vehicles leads to more advantages than drawbacks. The main advantages are that all kind of media can share the same LAN and that there is a lot of knowledge of this technique in the civil area. The main drawback is about delay.

Sickness absence is a measure of health and is therefore an important issue. To get a complete picture it´s important to also include in the discussion sickness presenteeism, working while ill, and voluntary absence, staying at home without illness. Working conditions have been proven to play a role for the three aspects which is why this study aims to further investigate the connections between them. The method used was secondary processing on interview data collected from two home care teams, one having a low and the other a high sickness absence. The results showed that there were big differences concerning working conditions, where the group with the high sickness absence perceived more stress, less control and less support from colleagues and superiors.