The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

In process oriented organizations, it is important to have well-functioning work processes tosupport the work being performed. In order to accomplish this, the organization has to makecertain decisions regarding the design and usage of the processes. This master thesis is based ona case study of a work process that is being used for the industrialization of products at Ericssonin Katrineholm. The aim of the study is twofold. One aim is to improve the studied process byidentifying improvement opportunities and carrying out the required adjustments.

It has become more common for organization to operate a lot of projects at the same time. These projects affect each other, either in way of resources or technical. Projects in a multi-project environment depend and affect each other, and in most cases they rival about resources, decision-makings and priority. To lead a project portfolio with several projects is a major challenge. The most common problems that occur are vague objective, unclear working conditions, resource shortage and problems of priority.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

This thesis investigates and emphasises on the way students at Växjö police academy describe their socialization into their profession as police officers and the creation of profession identity. The scientist?s main questions are: In what way do the students at Växjö police academy describe their socialization process into the police profession? What role does the organisation play in the socialization process of the police students? How do the students develop their police identity? Which qualities are encouraged? The study is based on qualitative interviews with nine police students, performed in groups of three. Group theory, role theory, and organization theory are applied to the material to provide an understanding through which it is possible to understand the process of socialization. The study shows that there seems to be patterns in the description of a professional identity.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible.

Throughout the years more and more charitable organisations have appeared and the competition between them has increased. This has forced the charities to use more marketing strategies in their work in order to strengthen their competitiveness. Research in philanthropy in terms of economy and marketing has been neglected in Sweden and the research that is done today is mainly focused on why individuals donate to charity. A donation, according to the writers of this thesis, has been seen as an economical activity and can therefore be explained and understood through economical models and theories. This thesis aims to see how a contributor to charity makes the decision to donate money, consequently see how the donation decision process actually works from a theoretical model of a buying decision process from marketing literature. The purpose of this thesis is therefore to from a buying decision process concerning products describe the donation decision process for contributors to charity. By achieving this purpose the writers aim to compare if a donation decision process go through certain steps similar to a buying decision process.

The use of balanced scorecards have spread explosively throughout the world during the last decade. This management tool have become very common in a vide spread variety of organisations on all continents. Many balanced scorecard fails though and scorecard theorists often blame the identification- and implementation process as they claim that these lay the foundation for the use of the tool. As my literature study shows, academic research on the area is rare. Particularly the effect on the implementation process from organisational dynamics and organisational structures needs further research.

This study investigates the succession process in family businesses and aims to enhance the understanding of the process as a whole, as well as how family businesses strategically plan for succession. The research is based on a case study of a family corporate group undergoing a transition from the fourth to the fifth generation. A qualitative research approach was employed, involving interviews with individuals from both the fourth and fifth generations, as well as external stakeholders who have influenced the process. The results show that the planning and implementation of succession are complex and that there is a certain lack of existing theory. Empirical evidence indicates that contracts and documentation are crucial for advancing the process. Inclusion of external parties is also important, not only for their expertise but also to provide an objective perspective.

How can a vacuum cleaner motivate you to use it? From a sustainability perspective,the author asked the question of how such a solution would looklike? These where issues that the project tackled and devised solutions for. Theproject wanted to explore the physical modeling and a large part of the finalresult consisted of a full scale model. The project found that the problem ofvacuuming largely consisted of the problem of storage the product. The projectfound that the motivation for the job, therefore, could be resolved by a betterdesigned vacuum cleaner with a built-in hose, folding handles, which couldbe stored integrated within the vacuum cleaner.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

The purpose with this masters thesis was to model the scanner in a system for laser bathymetry. The model was then used to develop a controller for the scanner so a good search pattern was achieved. Two different types of models have been tested, a physical model and a Black Box model of Box Jenkins type. The physical model has been derived from Lagranges equations. Identification experiments have been used to compute the Black Box model and to find the unknown parameters in the physical model.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

At the beginning of the nineties, a new form of organisation, the process organisation, was about to be born. The features of the process organisation were a flexible organisational that works in a world where the pace of development is increasing all the time. Today there are many organisations that have mapped their processes, but in order to truly become a process organisation, the processes among other things have to be in harmony with e.g. organisational culture. Which effects the organisational culture has on the process organisation is yet unexplored, but however quite crucial.